Used miter saws for sale (77)

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw saw-blade dia. 400 mm ja Kdodpfsupmv Uex Addsg

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm Kdedpotxkprefx Addeg -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable Kdjdegy Dbdspfx Addog -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ZS 200 N / 2014/53/40, saw blade diameter: 520 mm, cutting height (max.): 200 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, length stop: 7,000 mm, For sale: GRAULE ZS 200 N crosscut and mitre circular saw, equipped with control panel, motorized swivel and tilt adjustment, including roller conveyors (7000 mm and 4000 mm) with manual stop (with sight glass), as well as a chip extraction unit. The machine has been regularly maintained by a specialist company and is in very good condition. Kjdpfxoyannze Addedg

Condition: good (used), Table and mitre saw TGS 173 with sliding table - on mobile base cabinet with 2 drawers - Adjustable feet not included Kedpox R Eadsfx Addodg

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Kdjdpfx Aei Dfidoddjg Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Kdodok H Ic Uspfx Addeg Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Ksdpfx Adew Hlztedjdg Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm Kdodpex Ityysfx Addeg -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg Kjdpfxjh U U S Rj Addedg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm Kodpfxegzc Iyj Addodg -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Kdodpfogylq Ijx Addog -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: excellent (used), Omga V 113 P double mitre saw for frames Kdodpfxeyaa Uyo Addeg Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each with 1.1 kW power Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 80 mm, cutting width (max.): 80 mm, Double mitre saw ALFAMACCHINE T350 CE Double saw for cutting at 45° angles Blade diameter: 350 mm Kdjdpfx Adex U R Rcodeg Blade bore: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm Machine dimensions: 320x70x152 cm

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Ksdsxzpwlspfx Addedg Pneumatic pressers Adjustment stops 380V

Condition: used, Striffler Type 2750-E double-cut miter saw for precise miter and cross-cut cuts in wood profiles, moldings, and frames. The machine is ideal for series production in window, door, and furniture construction thanks to two pneumatically pivoting saw units and electronic positioning. Kjdpfxsw D Dfxe Addodg cutting length: about 2,200 mm miter angle: 45° – 90° workpiece: max. 50x70 mm Further data: See PDF

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 520 mm, type of input current: three-phase, total length: 1,750 mm, total height: 1,800 mm, total width: 1,030 mm, saw blade bore: 50 mm, input voltage: 400 V, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Very Good Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a client is a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing facility. The machine is in very good, well-maintained, and fully functional condition and has been regularly used until recently. Current UVV/safety inspection available (see photos). Viewing and function testing on site can be arranged at any time. ⸻ ❇️ Technical Specifications: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & Mitre Saw (for aluminium, wood, plastic) • Saw blade diameter: 520 mm • Bore: 50 mm • Swivel range: large, finely scaled mitre range • Drive: 400 V • Application area: Primarily for processing aluminium and profiles • Design: Heavy-duty industrial standard construction ⸻ ❇️ Features & Highlights • Very robust machine stand • Large dual-sided worktable (multiplex coated) • Pneumatic hold-down clamps • Extraction hood / extraction port • Digital measuring/length stop system (display mounted on top) • Precise swivelling mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Ready for immediate operation Ksdpfjx N Hxxox Addjdg • Only original Graule circular saw blades permitted (manufacturer’s note) ⸻ ❇️ Condition • Very good, well-maintained, immediately ready for use • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with VAT shown is possible • Delivery or transport available upon request and cost coverage • Location: 72229 Rohrdorf • On-site loading by overhead crane possible ⸻ ❇️ Price: Net asking price: €8,990 + VAT ⸻ ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ Other accessories for the workshop and metalworking are also available in my other listings. ‼️ Please also take a look at my other items. It’s worth it!

Condition: excellent (used), functionality: fully functional, Pneumatic stapler. - The automatic nailer pneumatically presses fastening elements onto the bottom of the mouldings - The clamping pad automatically adjusts to the height of the workpiece - Fastening elements are supplied on coils of 10,000 to 20,000 pieces (depending on size) - 200 to 300 complete frames per hour (depending on size) - Nailer type NR (two boxes of 12 mm fasteners included) Kedox U Dpfjpfx Addsdg - Overall dimensions approximately 96 x 61 x 122 cm and weight approximately 95 kg.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1-APD018-000, cutting width (max.): 2,200 mm, type of input current: three-phase, total length: 1,850 mm, total height: 1,370 mm, total width: 3,150 mm, overall weight: 2,500 kg, number of previous owners: 1, input voltage: 400 V, mount diameter: 152 mm, pressure: 6 bar, power: 18 kW (24.47 HP), compressed air connection: 6 bar, Roll cutting and rewinding machine RSW2200T Kdodpfx Adox Eg Ucsdeg

Condition: excellent (used), blade diameter 300mm motor power 1,6HP - 1,16kW Kjdpsnr Hd Aofx Addjdg max cutting dimensions 100x135mm angle cutting +/- 45 degrees

Condition: reconditioned (used), functionality: fully functional, Total length 3800 mm, two units, swivels 45° in both directions, cutting width 150 mm, extraction 2x 90 mm Ø – completely workshop overhauled. Kdjdex Ezycopfx Addeg

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase Kdsdjdy Hqvspfx Addog CE Safety requirements

Condition: new, - profile width max. (mm): 90 - profile height max. (mm): 80 - saw blade diameter (mm): 350 - saw blade bore (mm): 30 - motors: 2 each 1,5 kW - suction connections: 2 each Ø 80 mm - Pressure (bar): 6 - 7 - weight (kg): 300 - Cutting of mouldings: for wood, plastic and aluminum frames - Saw blades: 2 fixed at 45°. - Pneumatic aggregate stroke: with two-hand operation - Adjustable stroke speed - Pneumatic lamella clamping: in machine cycle - Automatic lamella adjustment: to profile shape - Diagram plates (mm): 700 long on the right and left side - Pneumatic length stop - Motor protection switch - Motor brakes - Tool kit - maintenance unit - Pressure switch Machine features - Easy handling Kdjdpfx Adjfiqhbodjg - Quickly executed work cycle - Low maintenance and cleaning effort

Condition: used, Year of construction: 1996, - Connected load (kW): 2 - Control voltage (V): 24 - Supply voltage (V); 400 - Compressed air supply (bar): 7 - Saw blade diameter (mm): 300 - Sawing width max. (mm): 150 Kjdpfx Adsbazzpedsdg - Sawing height max. (mm): 100 - Stop table length (mm): 4000 - Outfeed table length (mm): 2500 - swivelling: via control

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system Ksdpfsd Rhzwsx Addedg - Other accessories on request We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.