Used Double Mitter Saw for sale (17,657)

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm Rcedpfogy Dbdex Ah Ash -Total weight: 250 kg

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm Rcedpfx Ahsv Hgb Nj Aoh cutting height: max. approx. 80 mm

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Rodpfx Ahow T Rpzo Ajch Saw blade bore diameter: 30 mm Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Extended table on the right side

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW Rcodpowrw D Rofx Ah Ajh dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: used, functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, type of input current: three-phase, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg Rcodpfsw H R R Hex Ah Aeh

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm Rcjdpfx Aov U Dlujh Ash weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: used, Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left Rjdsgylq Ispfx Ah Aech -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 420 x 30 mm -Price/delivery: complete -Total dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LC191, cutting length (max.): 7,000 mm, air pressure: 8 bar, Double head radial saw machine. Rcjdpfx Aewm Hl Hsh Ajh

Condition: used, DOUBLE SIDED CUTTING SAW WITH FIXED BLADE TO CUT AT 90° - Manual carriage feeding - Blades diam. 300 mm. - Max. working lenght mm. 2000 - Electric blade movement Rodornkmwepfx Ah Aech

Condition: used, Double rip saw IDL000811 - max width: 2500 mm - electric cabinet - manufacturer: Tegle/norway Rsdpfx Aju At Tbjh Aech

Condition: like new (used), Year of construction: 2019, functionality: fully functional, saw blade diameter: 550 mm, pivoting range: 15 °, input voltage: 380 V, Emmegi Double Mitre Saw Precision TS2 with Emmegi MG 4 Extraction Unit All built in 2019 Rsdpfew Ambaex Ah Asch Double mitre saw with 3 CNC-controlled axes, featuring an automatically movable head and electronic control of all mitre angles from 45° (internal) to 15° (external) - 550mm saw blades - 4 clamps (2 from above and 2 from the front) - Cutting of oversized lengths possible up to 10,000mm - Import from Logikal or similar calculation software enabled - Includes extraction unit and extraction control (extraction hose included) - PRO software (oversize cutting, undersize cutting, cross cutting, wedge cutting) - Profile support roller conveyor on movable unit Extraction Unit Emmegi MG 4 - Motor power 2.2 kW - 2 extraction ports - Antistatic bag filter - Large chip container - Automatic start via electrical connection to the machine - Manual switch for machine cleaning available

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2 h, functionality: fully functional, machine/vehicle number: LM 500 W6-P, A Plasmek Plastic Makinalari LM500 W6-P wrapping machine is for sale due to lack of use. The machine has virtually zero operating hours and has not been used. All parts and accessories are included. Redpfx Ahow H Rpve Aech

Condition: good (used), Year of construction: 1997, Double mitre saw RAPID DGS 200 Rcjdjhctt Ejpfx Ah Aeh year of construction 1997 drive 2 x 2,2 KW, 400 V swivelling range manual 45° to 90 Saw blade 420 mm Ø Saw feed pneumatic cutting length 4000 mm Profile clamping 2 pcs. horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment manual Length display digital Air pressure 7 bar Profile support fixed outside and movable in the middle dimension L/W/H 5200/1200/1500 mm Weight 800 kg

Condition: good (used), functionality: fully functional, FOM BLITZ 2 double-head mitre saw Available for demonstration in our premises Equipment price includes loading Transport and installation available at extra cost. Rjdpfx Aow Dp A Njh Ajch

Condition: used, Year of construction: 1996, machine/vehicle number: 96T233, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - Tilting blades 45° - N. 2 motors 1.1 kw - Blade diam. 330 mm Redeqmpl Aepfx Ah Asch - V. 380/50 - S/N 96T233 - Year 1996

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Rcedpfx Aoq Atyzeh Ajh Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm Redevwgnwspfx Ah Aech cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw Rodpsg Db U Asfx Ah Asch - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, OMS FC330R Double Mitre Saw for Wood, Aluminium 2 x 2.2 kW Specification: • Condition – used, after maintenance/service • Manufacturer – OMS • Model – FC 330 R • Main motors – 2 x 2.2 kW • Hydraulic-pneumatic control • Max. cutting length – 351 cm • Min. cutting length – 36 cm • Max. cutting cross-section – 70x160 mm (at right angle) • Max. blade diameter – 330 mm • Extraction ports Ø 60 mm • Cutting angle range from -45 to +45 degrees (right, left) • Vertical clamps for the workpieces Rcodexdxkgepfx Ah Ajh • Weight – approx. 600 kg • Overall dimensions – 405 x 100 x 145 cm (L x W x H) Additional information: • Very good, factory technical condition • The photos show the actual condition of the item for sale • Machine can be powered up and tested on site

Condition: new, - profile width max. (mm): 90 - profile height max. (mm): 80 - saw blade diameter (mm): 350 - saw blade bore (mm): 30 - motors: 2 each 1,5 kW - suction connections: 2 each Ø 80 mm - Pressure (bar): 6 - 7 - weight (kg): 300 - Cutting of mouldings: for wood, plastic and aluminum frames - Saw blades: 2 fixed at 45°. - Pneumatic aggregate stroke: with two-hand operation Rcjdpfx Aofiqhbeh Ash - Adjustable stroke speed - Pneumatic lamella clamping: in machine cycle - Automatic lamella adjustment: to profile shape - Diagram plates (mm): 700 long on the right and left side - Pneumatic length stop - Motor protection switch - Motor brakes - Tool kit - maintenance unit - Pressure switch Machine features - Easy handling - Quickly executed work cycle - Low maintenance and cleaning effort

Condition: used, Year of construction: 1996, machine/vehicle number: 961227, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC MOD. TD1200 - CE RULES - N.2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - SN 961227 Rcjdpfernnrxsx Ah Aeh - Year 1996

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3550x1450x1800 mm Weight 3500 kg Total power requirement 94,75 kw Rjdpfx Aovz Hxqoh Ajch

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa Rcedjq Ii Dlspfx Ah Ash overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 Rcodeiux Izjpfx Ah Aoh - volt. 380/50 - s/n 2401011 - ce rules

Year of construction: 2008, condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer Rsdpfx Aei Ezwmsh Ajch hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg