Used Dovetailing Machines for sale (65,830)

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 100308, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, Manual dovetail milling machine, type X_line 20 Motor: 450 watts, Milling depth: 0 - 80 mm, Dovetail size: W 1 / 2 / 3, Maximum passage height: 110 mm, Manual tool clamping, Dust extraction port: D = 60 mm, Includes dovetail cutter W2 Weight: approximately 19 kg, As inspected, pickup from Seevetal location, Crsdpfxs Af Utpo Abwsi Ex works, excluding freight and packaging, Subject to prior sale.

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Csdpfxoyg N Hls Abwjri Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,100 kg, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Crodpfx Abjzp E Sbowei Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: like new (used), functionality: fully functional, AUTOMATIC DOVETAILING machine OMEC 750 for dovetail joints on drawers and different parts of furniture second hand machine Crsdpfx Aegzrlpobwji working condition : excellent dovetail jointing machine with tool : YES CE marks : YES volt. 380/50

Condition: excellent (used), Year of construction: 2021, 2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine Crodpfs Ahq Awsx Abwsi Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg, Note: ONLY 623 spindle hours. Note: Machine located in Wroclaw, Poland.

Condition: good (used), Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Cedjwl Iv Ropfx Abweri Weight kg 1100

Condition: used, Year of construction: 1995, 1995/2022 Koch/Aniro 14-strand Wire drawing machine - Upgraded in 2022 Crodpfx Abs Ah Ib Hewei Produces: 1.0 mm diameter wire from 5.5 mm diameter wire rod - Low carbon. 3 strings, drum diameter 600 mm. 11 strings, drum diameter 340 mm. 3 x 11 kW motors. 12 x 17 kW motors. Wire production speed approx. 9 m/s Dimensions: Length: 22,000 x Width: 2,200 mm, Electric cabinets: Length: 8,000 x Width: 600 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Codpfs Aggu Aox Abwsri Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: like new (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, warranty duration: 12 months, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, year of last overhaul: 2026, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off right hand units, Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organized by appointment 💰 Price: £20,500 Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Please get in touch for: • Additional photos Credpfx Aoyyl Aqebwei • Full specifications • Video / demonstration • Bulk purchase enquiries All Test certs attached from Ishida for X Ray and radiation safe levels Viewings Welcome for full demonstration

Year of construction: 2013, condition: used, 2013 Neway GVM 850 H CNC Machining Center with Fanuc 0i-MD Controller X / Y / Z Axis Travel: 850 mm × 520 mm × 560 mm. Table Dimensions: 950 mm × 520 mm. Distance spindle to table: 150-710 mm. Maximum Table Load: 600 kg. Spindle Taper: BT40. Spindle Speed: 8,000 RPM. Spindle Motor Power: 7.5 kW continuous / 11 kW peak. Control System: Fanuc 0i-MD. Tool Magazine (ATC): 24-station arm-type. Rapid Traverse (X/Y): 30 m/min. Rapid Traverse (Z): 24 m/min. Note: Machine located in 32-640 Zator, Poland. Crsdpfx As Ahq Dmobwei Machine dimensions: 3672 x 2414 x 3000 mm. Machine Weight: 6,000 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x750x1250 mm Weight 600 kg Total power requirement 3 kw Codov A Hyqopfx Abwsri

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Crsdpfx Aev A Hywebwoi Weight 680 kg Total power requirement 3 kw

Condition: used, Year of construction: 2011, 2011 Kitamura Mycenter HX800iL Twin Pallet CNC Horizontal Machining Center With Fanuc Series 16i-MB Control Pallet Table Dimension 800 x 800mm (Sub Table 1,000 x 1,000mm (7 'T' Slots). Maximum Component Dimension 1,500 x 1,500mm. Maximum Table Load 1,500kg. Axis Travel 'X'=1,400mm, 'Y'=1,250mm, 'Z'=1,325mm, 'B'=360° (0.001° Increments). Rapid Traverse 'X=50m/min, 'Y'=50m/min, 'Z'=50m/min, 'B'=8°/min. Maximum Spindle Speed 8,000rpm (40kW Motor). 50 Position ATC. Spindle Taper BT50. Maximum Tool Ø125mm, Maximum Tool Weight 30kg. Power Requirement 70kVA. S/No. 48036 (2011). Sale includes2 x 1mtr. tables as pictured. Crodpo Ahg Rrsfx Abwsi With Through Spindle Coolant System, Dual Auger To Hakusan Chip Conveyor, Cleanmist CM 2300/3 Oil Mist Extraction Unit (With Spare Filter), Oil Chiller, Additional Sub Plate 1,000 x 1,000mm, Renishaw OMP60 Spindle Probe, Hand Wheel & Manuals.

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Codpexcbl Defx Abwjri Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2020x920x1160 mm Weight 750 kg Total power requirement 3,2 kw Credpfx Absv A Hy Dowji

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 14,000 mm, total width: 4,500 mm, total height: 2,900 mm, overall weight: 12,000 kg, input voltage: 415 V, track width: 80 mm, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Model - PIE LINE. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Working width – 800mm wide. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. Overall footprint – 14m long x 4.5m wide (including return conveyor) x 2.9m high. Line maximum width – 2.2m at widest point. This production line comprises of the following equipment/machinery: Crodpfxozvmy He Abwsi 1. 2 X sets of tooling complete with trollies – 1 X set for 4-across pies with casing diameter of 110mm and 1 X set for 3-across ‘family-style’ pies with casing diameter of 180mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 5a. Rademaker Flour Sifter. 6. Rademaker Tamping unit (used to press / tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘SPRAYING DEVICE’. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Press / Crimping unit / Marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie Exit/Discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. CONDITION - Requires some reconditioning before entering production. NOTES – BUYER TO REMOVE FROM SITE.

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. Cedpoz E Sbrofx Abweri This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: used, Year of construction: 2011, 2011 Kitamura Mycenter HX800iL Twin Pallet CNC Horizontal Machining Center With Fanuc Series 16i-MB Control Codpfx Aj Ad Df Hjbwori Pallet Table Dimension 800 x 800mm (Sub Table 1,000 x 1,000mm (7 'T' Slots). Maximum Component Dimension 1,500 x 1,500mm. Maximum Table Load 1,500kg. Axis Travel 'X'=1,400mm, 'Y'=1,250mm, 'Z'=1,325mm, 'B'=360° (0.001° Increments). Rapid Traverse 'X=50m/min, 'Y'=50m/min, 'Z'=50m/min, 'B'=8°/min. Maximum Spindle Speed 8,000rpm (40kW Motor). 50 Position ATC. Spindle Taper BT50. Maximum Tool Ø125mm, Maximum Tool Weight 30kg. Power Requirement 70kVA. S/No. 48036 (2011). Sale includes2 x 1mtr. tables as pictured. With Through Spindle Coolant System, Dual Auger To Hakusan Chip Conveyor, Cleanmist CM 2300/3 Oil Mist Extraction Unit (With Spare Filter), Oil Chiller, Additional Sub Plate 1,000 x 1,000mm, Renishaw OMP60 Spindle Probe, Hand Wheel & Manuals.

Condition: used, Year of construction: 2007, 2007 Felsomat Gantry Robot Loading Unit with Siemens PLC Rail Length 1,500mm Upright Height 2,300mm. With Transfer Unit. S/No. 206200 (2007). Crjdpfx Abs Ahg Spswsi

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Crodpfx Aj Ad Efnjbwei Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 43 h, machine/vehicle number: PR4-3000-0719-0385, control type: CNC control, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase Cjdpfxe Ahikqo Abwsri - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, year of last overhaul: 2022, overall weight: 3,800 kg, product height (max.): 280 mm, Equipment: documentation/manual, The machine was overhauled in 2022! TECHNICAL DETAILS Number of printing colors: 1 Product diameter: 20–130 mm Product length: 40–280 mm Product height: max. 280 mm MACHINE DETAILS Feeding system: K23 Scrambler with hopper Cedpo Ahppwofx Abweri Inspection system: Deco camera inspection system Operating voltage: 230/400 V Frequency: 50 Hz Rated current: 32 A Operating pressure, compressed air: max. 6 bar Compressed air consumption: max. 7 Nm³/h Dimensions & Weight Dimensions (L x W x H): 7,500 x 6,450 x 2,300 mm Total weight: 3,800 kg EQUIPMENT Fully automatic high-speed screen printing machine K9 Single-color screen printing system Automatic product sorting and feeding system K23 Scrambler Hopper Deco camera inspection system for print quality control Suitable for printing cylindrical products such as bottles, tubes, and similar containers Complete maintenance history available up to the time of storage.

Condition: used, Year of construction: 2008, 2008 DMG Sauer Lasertec 80 Fine Cutting Laser Processing Cell with Fanuc Robot M16IB 20 Handling System & DMG Siemens 840D Powerline CNC Control Cell Comprising Load/Unload Palletised Loading Robot. Chiller, Dust Extractor, Filtration & Rofin Cutting Laser System. Details: Sauer Lasertec 80 Laser Cutting Machine. Axis Travel: 'X' Travel Approx 800mm, 'Y' Travel Approx 500mm, 'Z' Travel Approx 700mm. Maximum Working Width Approx 500mm, Max Cutting length Approx 800mm. Fanuc 6-Axis Modular Robot M-16IB 20, 20kg Pay Load with Stand Alone R-30IA Control. Robot Arm Reach Approx 1,600mm. Rofin DC 015 Cutting Laser System with Stand Alone Control 4763 4763 (2008). KKT Kraus Stand Alone Chiller System KLC19 N-L (2011). Rittal Top Therm SK 3304100 Cooling Unit. Keller Dust Extraction Stand Alone Unit with Aktor-Sensor Bus-System Digital Control. Floor Space Required for Full Cell Approx 7,300mm x 5,000mm. Weight of Laser Processing Machine Approx 5,700kg. 3 Phase Power Supply, 415 Volt.Viewing Recommended. Crjdpfsz E Sabsx Abwji

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Csdpfez E R Idsx Abwori Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Credpfx Ajz S T Ubebwei Total number of drilling spindles: 11 Total number of tool changer positions: 12