Used Drill Bit Sharpening Jig for sale (6,135)

Condition: like new (used), Year of construction: 2009, bore capacity in steel (diameter) 20 mm x-travel 240 mm y-travel 160 mm table-size 430 x 240 mm spindle taper MT 2 spindle turning speed - stepless 200 - 3600 U/min quill stroke 75 mm voltage 400 V total power requirement 0,7 / 1,3 kW weight of the machine ca. 220 kg dimensions of the machine ca. 0,60 x 0,85 x 1,65 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 187426 - Stepless speed adjustment - Digital speed display Csdpszyvadofx Ab Dehb - Cross table - Collet chuck - Mounted on a base frame

Condition: used, Year of construction: 2011, bore capacity in steel (diameter) 40 mm Codpfxezyvawe Ab Dehb throat 250 mm bore stroke 125 mm spindle taper MK 4 spindle turning speed range 50 - 2500 U/min 550 mm 230 mm table surface area 820 x 240 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand

Condition: used, Used machine Chsdpfezyy Dyex Ab Djb Equipment and technical data:

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: Csdpfx Abezwg Tij Dshb - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Cedpfx Abezvfn Nj Dehb Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. Chodpfozypgdex Ab Dob The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: used, Year of construction: 1994, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 55 - 1450 U/min taper MK 4 column diameter 145 mm Chodpjzu Tk Njfx Ab Dsb total power requirement 2,2 kW weight 500 kg dimensions 800 x 1000 x 2000 mm Features: - Heavy-duty pillar drill - Infinitely variable speed control (V-belt) - Automatic spindle feed * with electromagnetic engagement - Pole-changing motor - Right/left rotation of the drill spindle - Fixed drilling depth stop - Machine table with 2 T-slots * height-adjustable via hand crank - Coolant system - Machine vise - Drill chuck - Emergency stop

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Chodpfx Aezi S Snob Djb Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Chodpozr Ix Aefx Ab Deb Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) Chsdpoxdttiofx Ab Dsb - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Chodpfjvutw Hex Ab Djb Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2026, Heavy-duty design for the entire machine High running smoothness thanks to a new spindle design Industrial motor Separate emergency stop switch Drill depth stop LED machine light integrated into the drill head Precisely machined, stable drill table with diagonally arranged T-slots and an all-around coolant channel Drill table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Precision spindle bore Machine control and safety electronics in 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Thick-walled steel column for high force absorption and stability Massive, generously sized base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/Depth approx. 485 mm Height approx. 2040 mm Weight approx. 162 kg Drilling capacity Drilling capacity in steel (S235JR) 30 mm Continuous drilling capacity in steel (S235JR) 25 mm Drill table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slot size 14 mm Number of T-slots 2 Rotation 360° Tilt 45° Distance spindle - drill table max. 784 mm Speed range Speed range 120 – 1810 min⁻¹ Number of speed ranges 9 Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slot size 16 mm Number of T-slots 2 Spindle Quill stroke 125 mm Spindle mount MK 4 Overhang 270 mm Csdpfjg Uaiusx Ab Dehb Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Codpfxjg U Uv Uj Ab Dohb Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy Chjdpfx Abodqzbns Djb

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, total height: 3,800 mm, total length: 7,000 mm, total width: 5,550 mm, table length: 1,600 mm, table width: 1,200 mm, table height: 965 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, overall weight: 26,500 kg, The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Cjdoq I Ncqspfx Ab Dohb Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: 2 x hinge belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TM 4 is a highly stable traveling column milling center with a T-shaped frame, featuring a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request Chsdpfx Ajq I Nkbeb Deb ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Coolant system: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-shaped machining center with a large rotary table and a large working envelope. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Cedpfxsq I Nlyj Ab Dehb Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available on request ✔ 24-month warranty Technical features: Control: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm Chsdpfsyzq Dpex Ab Deb weight 7000 kg

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Cjdpfevm Akgjx Ab Djhb universal head portable radial

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. Cjdpfx Aeywtxbjb Dshb This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) Csdszgckvepfx Ab Dohb The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: used, Year of construction: 2018, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 Csdsyf Hc Iopfx Ab Dohb - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 Chjdpezavvgsfx Ab Dsb - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm Cjdexlqxfopfx Ab Dshb - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Nagel Citoborma 480 AB Chsdpezyu Imofx Ab Dob