Used Angle Drill for sale (11,216)

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm -Weight: 11 kg Tjdpfolw Az Aox Al Ajc

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Torque: 10 Nm Tedpjv Inwzefx Al Aec Idle speed: 1050 min-1 Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Condition: good (used), Cordless angle drill/driver, cordless angle drill, -Manufacturer: Bosch, Cordless drill/driver type GWB 7.2 VE Tjdpsw Iftqjfx Al Ajc -incl.: charger -Quantity: 1x drill/driver available -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Condition: used, Used Hebö RBV 12 with two opposing drilling heads for single-sided or double-sided machining of tubes and profiles. Manufacturer: Hebö Metalworking Machines Model: RBV 12 Machine type: Tube drilling machine / tube machining machine Number of drilling heads: 2 Speed: 0–2,250 rpm Drilling feed rate: 0–300 mm/min Tedpfx Alsz Hymxj Ajc Total motor rated power: 5.8 kW Max. round tube: 76.2 mm (3") Max. square tube: 80 × 80 mm Max. T-profile: 80 × 80 × 8 mm Max. double post: 80 × 10 mm Max. flat material: 80 × 10 mm Max. drilling diameter: 43 mm Thread forms / reaming: up to M10 Angle drilling: up to 60° Tool holder: SK40 Machining: Single-sided or double-sided Tube feed: Manual with stop system Weight: approx. 395 kg Dimensions: approx. 4,100 × 1,670 × 1,450 mm Condition: Used Assistance can be provided with loading by the seller.

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim Tjdpfx Aszlbqfol Aoc

Condition: new, grinding range 8 - 32 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 16 Kg dimensions of the machine ca. 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: Tjdjupxh Nspfx Al Ajc 430 x 240 x 240mm. Weight 16kg.

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min Tjdpfjvn U Adex Al Asc connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Todpfxezrnndo Al Aec Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Todpfx Alez Hd Tpo Aoc Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual. Tjdpfezt H Nvjx Al Ajc

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy This lot has been professionally dismantled. Todpfx Aoz Arylel Aoc Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kaltenbach KPS 506 CNC Flat Bar / Angle Punching / Shearing Line – Year 2007. Todpfjz Hfadjx Al Asc 500mm Capacity Flat Bar. 160mm x 160mm Angle. 3 head Punch. Horizontal punch. 6 metres Gripper feed. Mitre Shearing.

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Tedpfszlg Szjx Al Aec Model: 108

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Tjdozlhlpjpfx Al Ajc Model: ZB 32 Capacity: 2.5-32mm With Cams

Condition: good (used), Year of construction: 2003, functionality: fully functional, Voortman V603 / VB750 CNC Drilling / Sawing Line – Year 2003 Three Spindle. 18 metres In-Feed. 13.5 metres Out-Feed. Pusher Unit Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity. Todpfx Alsz Hd Sfj Aec

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm Tedpfsu Ngxdex Al Aoc grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW Tsdpfxeu Ng Nce Al Asc weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device Tjdpfxju Ng Hne Al Aec The machine is including accessories see pictures! *

Condition: used, bore capacity in steel (diameter) 13 mm throat 180 mm bore stroke 70 mm morse taper 3 MK table: 215 x 215 mm Tedpfx Aswpltusl Asc turning speeds 240 - 4000 U/min engine output 0,7 kW column diameter 65 mm dimensions 650 x 250 x 800 mm weight 50 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, Year of construction: 1990, Archdale Radial Drill. Spindle speeds 475-2000. Box table Power Rise and Fall DC Injection Spindle Break Speeds 4-2000 rpm 8 Hp. Todpfx Ajz Hfdvel Ajc

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Tedpeu Ng Irofx Al Aoc Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm Tjdokahu Ropfx Al Aoc morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm Todpfokahu Ujx Al Aec bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm Tjdpfxeprfbus Al Aoc bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Tedsz A D H Uspfx Al Aoc Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.