Used Drill Chuck for sale (8,430)

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Prjdpfx Absywhu Douec Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany Podpjxtu D Usfx Abuerc

Condition: new, Motor: 750W - 230V - 1 Phase Predsk Iuqyspfx Abuoc Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Podpfx Ajzd Hntsbujrc Storage location: Nattheim

Condition: new, Benchtop drill press OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition model - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, Arm reach: 180 mm, Table size: 280 x 245 mm, Max. drilling capacity in steel: 25 mm, Motor: 750 watts, Column diameter: 73 mm, Predpfe Aaz Ttox Abuec Dimensions (L x W x H): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle mount: MK 2 Benchtop drill press with V-belt drive - Industrial motor - User-friendly safety switch according to IP 54 - Digital depth-of-drill and speed display integrated into the housing - Separate emergency stop switch - Precision-bored spindle - Safety electrical system in 24 V DC - Guaranteed concentricity accuracy less than 0.02 mm, measured in the drill chuck - Drilling spindle with precision ball bearings - High-quality quick-change drill chuck - Depth stop - Precisely machined, stable drill table with diagonally running T-slots and a surrounding coolant channel - V-belt cover with safety switch - One-piece, die-cast aluminum spindle lever with soft-grip handles - Large, height-adjustable protective shield with safety switch - Heavy-duty design of the entire machine - GATES quality belts - Right/left rotation -- Scope of supply -- Quick-change drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-slot wedges Special set including machine vise BMS 100 - New exhibition model -

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg Prjdouix Sgopfx Abujc

Condition: good (used), 3-Jaw Spiral Chuck Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws • 1 chuck key Siegfried Volz Machine Tools Pedpfx Aepmtgnjbuerc Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: SEOM CAS50, overall weight: 800 kg, chuck outer diameter: 1,250 mm, three-jaw chuck diameter: 1,250 mm, bolt circle diameter: 463 mm, total height: 180 mm, outer diameter: 1,250 mm, cone mount: 520 mm, cone diameter: 520 mm, spindle bore: 520 mm, rotational speed (max.): 500 rpm, Seoam CAS50 Chuck, like new with less than 500 hours of usage. See images (with rust preventative applied). Predjz Erq Tjpfx Abujc

Condition: new, Motor ----- 1100W - 400V - 3-Phase Drilling capacity ----- 32 mm Spindle stroke ----- 120 mm Spindle taper ----- MK4 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 470 x 420 mm Base ----- 580 x 430 mm Column diameter ----- 92 mm Overall height ----- 1720 mm Weight ----- 128 kg Packaging ----- 1430 x 660 x 320 mm INCLUDED * Digital depth stop * CE guard Psdpfsga T Hrox Abujrc * Laser device * LED lighting * CE emergency stop * Drill chuck with MK4 taper * Ejector pin

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Please Note: This Lot is located in Birmingham, UK. Psdpe Afwlqefx Abuorc

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min Podpfju Id Dzox Abuorc spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: new, functionality: fully functional, ALZMETALL Alzstar 18-T/S, Manufacturer: Alzmetall Type: Alzstar 18-T/S Condition: New / Demo Machine Drilling capacity in St 60 steel: 18 mm, Pjdpfxey S Au Uo Abuerc Thread cutting in St 60 steel: M 12, Thread cutting in GG 20 cast iron: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Overhang: 190 mm, Column diameter: 65 mm, Machine table - usable surface: 300x240 mm, Number of T-slots - width - spacing: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base - usable surface: 300x240 mm, Number of T-slots - width - spacing: 2 x 12 x 80 mm, Distance spindle-base min./max.: 437/437 mm, Manual feed, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for right and left rotation Speed adjustment, stepless Protection class IP 54 Mushroom push button (self-locking) for EMERGENCY STOP Spindle guard with electrical protection Optional: - LED machine light - Undercarriage - Drill chuck 1-13 or 3-16 Available immediately. For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. More Alzmetall bench drills and floor drills constantly in stock!

Condition: new, Year of construction: 2025, Power: 750 W / 400 V Drilling capacity in steel: 25 mm Speed range: 60 - 3050 rpm Spindle taper: MK3 Prodeir Embepfx Abusc Quill stroke: 95 mm Spindle overhang: 209 mm Table size: 308 mm x 308 mm Quick-change chuck: 1 - 16 mm Weight: 107 kg

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Podpfeu Ng Hnox Abujrc Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: used, Technical details: bore capacity in steel (diameter): 13 mm throat: 160 mm bore stroke: 60 mm spindle taper MT: MK2 spindle speed:: 210 - 2580 / 16 step U/min feed: manual mm/U table clamping surface:: 200 x 185 (fest) mm Distance spindle/table max.: 620 mm table clamping surface:: 260 x 265 (verstellbar) Distance spindle/table max.: 160 - 460 mm table rotating: ja ° drill table adjustment: 300 (Handkurbel) mm column diameter: Ø ca. 70 mm total power requirement: 900 Watt weight of the machine ca.: 90 kg dimension machine xH: 0,6 x 0,31 x 1,7 m The machine is equipped with a RÖHM 1-13 drill chuck incl. drill chuck key. Predpfx Abevgbdxeuoc Spindle run right. Small vice included *

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 00127634, functionality: fully functional, High-speed bench drill, Made in Germany - Clamping table: 290 x 225 mm - Travel: 150 mm with hand crank - Spindle fitting: Drill chuck included - Drilling capacity in steel Ø 1 - 6 mm - Throat depth: 180 mm - Speeds: 900 - 10,000 rpm, 8 steps - Column: diameter 75 mm - Spindle stroke: 60 mm, with fine stop - Voltage: 380 V - Dimensions: 640/330/H740 mm - Weight: 92 kg Pjdpfsyx Dzpjx Abuorc

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm Prsdpfou Idkbex Abuoc spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Prsdpfxsy S Auue Abusc Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm Prjdeu Id Dbspfx Abujc total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 79 mm weight of the machine approx.: 19,0 kg Prsdpfxsu Nk N Tj Abuoc dimensions L x W x H: Ø 250 x B: 110 mm 4-jaws lathe chuck made of steel pitch circle diameter = 230mm, with drill holes 3x M12 x45mm, flange intake Ø 210 x 4mm clamping jaws adjustment vai chuck key, clamping area approx. Ø 60 - 240mm top used condition *

Condition: new, Year of construction: 2026, NEW FLOTT SB 13 plus Pillar Drilling Machine - Spindle: B 16 (MK II additional charge €160 / Article no. 212504) - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/normal drilling capacity (mm): 13/15 in E335/ST60 Pedpfx Aexrdrxjbujrc - Tapping capacity (depending on pitch): M10 - Drilling depth (mm): 60 - Throat depth (mm): 220 - Usable work surface (W x L) (mm): 300 x 250 - Rack-and-pinion table height adjustment - Infinitely variable spindle speeds (rpm): 40 – 4000 - Dimensions (mm): 420 x 540 x 1780 For more TECHNICAL DATA, please refer to the product sheet! OPTION Drill Package 2 (296591) - €300.00 - [felix] 2.0 80 bench vice - Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm) - Taper arbor B16/MK II - Reducing sleeve MK II/MK I 3-year warranty for single-shift operation NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Condition: used, Technical details: diameter: 250 mm passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm Prsdpfx Aju Nla Hobujc three jaw chuck made of steel flange intake Ø 210mm with 3 pcs drill hole M12x44 incl. 3 set of 3 jaws *

Condition: used, Year of construction: 1998, Technical details: bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm Prodpfx Aeu Idutebuoc 2x quick chuck 10mm *

Condition: used, Technical details: Predou Nlc Iopfx Abuec diameter: 250 mm passage: Ø 80 mm width: 75 mm weight of the machine approx.: 19,0 kg dimensions L x W x H: Ø 250 x B: 105 mm 4-jaws lathe chuck made of steel pitch circle diameter 228 mm, with drill holes 3x M12x40 mm, flange intake Ø 200 x 5mm clamping jaws adjustment via chick key, clamping area approx. Ø 6 - 160mm top used condition *

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) Pjdpsu Idw Ijfx Abuerc - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *