Used Drill Rig for sale (30,509)

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: Godpfx Agow Ucm Uo Nsuh 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Guodpfjxb Hgdex Ag Njh 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2023, condition: new, machine/vehicle number: 383036928, 16x 120mm DTH drill pipe , 4000 mm x 85 mm , 2 7-8\" API Reg 02x Adapter shank 2 3-8\" API Reg Pin x 2 7-8\" API Reg Box Gujdpehypv Ujfx Ag Neh 02x 140mm DTH drill bit 02x 5\" DTH Hydraulic breaker with DHD350 shank, 2 7-8\" API More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Gedpfx Agsl Tn Epo Nouh

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Gusdpovgy E Ujfx Ag Njh Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Year of construction: 2023, condition: new, machine/vehicle number: 801694948, Boring rod + hydraulic hammer 8x 76mm DTH drill pipe , 4000mm x 63mm, 2 3-8\" API Reg 1x 3,5\" DTH Hammer with \" shank with 2 3-8\" API More Information Guodpfx Aohypv Rsg Njh Intended use: construction,

Condition: used, Year of construction: 2010, Field of application: Construction Serial number: 110M153xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19576 Gedpjvyf I Iofx Ag Nsuh Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Total Weight: 5200 Kw: 62

Year of construction: 2019, condition: used, New: No Field of application: Construction Serial number: TMG19SEDO186/8992 011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18688 Specifications: Gjdpfx Asxivxleg Nsuh 2019 model Engine hours: approx. 5,100 Hammer hours: approx. 1,700 Power: 116 kW Weight: 10,500 kg Undercarriage (see pictures) Machine width: approx. 230 cm Winch Undercarriage replaced in 2024 L5 GPS system Grinder Hammer serviced by Epiroc Description:2019 Epiroc T30R drill rig equipped with L5 GPS system.Undercarriage was replaced in 2024.Hammer service performed by Epiroc, engine serviced in-house every 250 hours.Available for prompt delivery. Own weight: 10500 Total Weight: 10500 Width: 230 Kw: 116 Hammer hours: 1620 Engine hours: 4890 Model: FlexiRoc

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Guedpfx Aewvzrmsg Noh Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: used, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21270 Specifications: Model year: 2016 Drilling hours: approx. 1400 Weight: 10,000 kg Undercarriage (see pictures) Winch Ready for delivery Description:2016 Sandvik Dino DC400Ri drilling rig with an almost new undercarriage.The undercarriage was replaced after the last job.The rig is ready for delivery. Godpfjxatqmox Ag Nouh Own weight: 10000 Model: DC400RI

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Gusdpfxjw Rag De Ag Njh Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Godpfx Aevg Nt Ieg Nouh Model: 55S

Condition: ready for operation (used), functionality: fully functional, power: 168 kW (228.42 HP), fuel type: diesel, color: yellow, overall weight: 16,600 kg, chain condition: 70 %, Year of construction: 2012, operating hours: 6,921 h, Equipment: air conditioning, cabin, Year of manufacture: 2012 Hammer operating hours: 6,921 h Total operating hours: 17,063 h Enclosed cab Air conditioning Rear view camera 6 drill rods (complete set) Drill bit with diameter of 85 mm Fuel filling pump CAT C7.1 Tier 4 Final engine with 168 kW CE/EPA Undercarriage 70% remaining Only one previous owner, always fully serviced Manufactured in Sweden Operating weight: 16.6 t Gujdpfoxhchwex Ag Neh Additional information: Drill holes from 64 mm to 127 mm possible Max. drilling depth: 37 m.

Condition: used, operating hours: 20 h, Fuel type: Diesel Application: Construction Engine power: 354 kW (481 HP) CE marking: yes Guodpsuu Df Dofx Ag Neh Overall condition: very good Technical condition: very good Visual condition: very good Damages: none Price: On request

Condition: used, New: No Gusdpfjwph D Ajx Ag Noh Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S

Year of construction: 2011, condition: used, Field of application: Construction Serial number: 110245xxxx Please contact ATS Norway for more information Gedpfswph Egox Ag Nouh Please provide reference number upon request: 20555 Specifications: Model year: 2011 Engine hours: approx. 7,200 (may increase – machine is in daily use) New chains on the mast Undercarriage: see photos for condition Boom rotor replaced about a year ago (cost: EUR 21,000) Oil leakage under the rig Tracks at the front of the mast are damaged and need replacement Hammer not included Video available Delivery by arrangement Description:2011 Gemsa Gemrok 45 SDKJM drill rig.Fitted with new chains on the mast and storage unit. The boom rotor was replaced approximately one year ago, with a total investment of EUR 21,000.There is an oil leak under the rig, and the front tracks on the mast are damaged and will need to be replaced.The machine is currently in daily use, so the hour count may increase.A video is available upon request. Delivery to be arranged. Hours: 7200

Year of construction: 1999, condition: used, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 11049 Specifications: - 1999 model - Hours: approximately 12,750 - Winch - Vacuum cleaner - 38 hammers - 4 cylinder water-cooled Deutz engine Gusdjxlnliopfx Ag Neh - Okay chassis - Ready for delivery Description: Owner says it works as it should and that it is a 1999 model It is Ready for Delivery Own weight: 1 Model: Copco

Condition: good (used), Year of construction: 2018, Burning/Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of Manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool turret Tool holders: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring (scribing): 5 to 40 mm Sheet size min.: 1,500 x 300 mm (750 x 400 mm with restrictions) Minimum finished part size: 80 x 80 mm Max. sheet weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or sheets: 4,000 x 2,000 mm Datum position cross transporter Godpfovzrczsx Ag Njuh Number of carriages: 2 clamps NC infeed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table and chute Material collection container for the discharge of small parts. Filter unit including piping Powerful for the use of carbide tools. For drilling, thread cutting, marking, milling, and plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license Availability: Immediately 91025ä

Condition: excellent (used), Year of construction: 2020, operating hours: 1,754 h, functionality: fully functional, overall weight: 2,720 kg, fuel type: diesel, color: yellow, number of seats: 1, Equipment: gripper hydraulics, hydraulics, rubber tracks, For sale directly from a VERMEER dealer who has carried out a complete service on the machine for us. We specialise in sourcing horizontal drilling rigs on request for our clients. Additionally, we provide transport services within Poland and the European Union. The machine does not include GPS or a mud mixing system (both can be arranged for an additional fee). Vermeer D8x12 Navigator Horizontal Directional Drill (2020) 🔹 Condition: Very good, fully operational and ready for work 🔹 Year of manufacture: 2020 🔹 Intended use: Installation of utilities in urban environments and confined spaces – compact dimensions and low noise levels make it the ideal solution for city applications. ✅ Main technical specifications: Engine: Kohler KDI1903, diesel, 48 HP (35.8 kW), turbo, EU Stage IV (Tier 4 Final) compliant Thrust/Pullback Force: 7,850 lb (34.9 kN) Spindle Torque: up to 1,200 ft-lb (1,627 Nm) Spindle Speed: 0–182 rpm Carriage Speed: up to 48.5 m/min Travel Speed: up to 4.5 km/h Minimum drilling diameter: 6.4 cm Noise level: 85 dB(A) at operator position 📐 Dimensions and weight: Transport length: 353 cm Width: 90 cm Height: 165 cm Weight: approx. 2.7 t 🔩 Drill rods: Firestick #200, length 1.8 m, diameter 33 mm (18 kg), bend radius 17 m Gedpfx Aew Tt Awsg Nouh Alternative: diameter 42 mm (26 kg), bend radius 29 m Magazine for 54.9 m of drill rods ⚙️ Equipment: Hydraulic vise Strike Alert (safety system) Remote Lockout Stakedown system (anchoring) Optional equipment: lighting, rod greaser, wash wand

Condition: good (used), 12-head drilling machine for sale, Table size: 400 x 360 mm Godpjpy D Dwofx Ag Nouh

Condition: ready for operation (used), Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available. Godetpp Ifjpfx Ag Nsuh

Year of construction: 2023, condition: used, machine/vehicle number: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Guodpjwpr Tnofx Ag Njh Increase your efficiency directly at the workplace: The TM Minibox is the smart, space-saving tool dispensing system for your production. Whether as an entry into digital tool management or as a supplement to your existing infrastructure – with the TM Minibox you take your production to the next level.

Condition: new, Year of construction: 2024, functionality: fully functional, Thrust press system Push and pull force: 24/30 t Hydraulic station 50 m boom Expanders: 80/132/160/200 mm Without locating device Price: €25,000.00 net Gjdpfx Ageuy N H Eo Nsuh Dry drilling: no bentonite used, no bentonite disposal

Condition: used, Year of construction: 2012, operating hours: 6,006 h, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! Gjdporrbm Refx Ag Njuh _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved!

Condition: used, functionality: fully functional, fuel type: diesel, color: red, overall weight: 5,000 kg, Year of construction: 2019, We are selling our Bohak well drilling machine. The machine was only used for private drilling and has therefore only had a few working hours since its purchase in 2022. The detailed description can be found on the last page of the pictures, as it is very comprehensive. The drill rods include 33 rods of 3 meters each. The drill heads are listed in the description on the last picture. Everything you need for drilling is included, so you can get started right away. The machine is functional and can be inspected on site. Guodpfjv I S Epjx Ag Nsh Detailed instructions and circuit diagrams are available upon request. Additional pictures are also available upon request. We purchased the machine used and overhauled directly from the manufacturer in 2022. The original invoice is available for inspection. The price is net, VAT is not included. The machine is located in Worms-Rheindürkheim. Please feel free to inquire by phone. Warranty and guarantee excluded