Used Electric Drill Machine for sale (100,548)

Condition: ready for operation (used), Servo-driven tapping and threading machine, Used machine Manufacturer: Electric Servo Model: M12H Giedpfexdfausx Abdsl Dimensions: Width: 700 mm Depth: 150 mm Height: 520 mm Radius: 1100 mm Comes with Tap Torsion GT 12-0316 chuck set: 3.5 × 2.7 M3 4.5 × 3.4 M4 8 × 6.2 M8 M6-8 Torsion u-6.3 M5 Torsion u-5 M10 Torsion u-8 M12 Torsion u-9

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Giodpfjwzqx Hjx Abdsl Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-SX -Welding power: max. 270 A -ground cable Gijdpsx Hwahofx Abdel -Dimensions: 600/300/H390 mm -Weight: 31 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Gijdpfxox H Npuo Abdol Machine is fully equipped: see dokuments Machine houers 22039.

Condition: used, Year of construction: 2019, Wire EDM Machine Godoxpfy Sepfx Abdsil Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Giodpfx Ajvdu Hzsbdol Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement Gijdpfex D Iv Sox Abdol X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Overall Dimensions: Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Gisdpfx Aoxu E Duobdsl Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V270-S -Welding power: max. 270 A -ground cable -Dimensions: 485/280/H390 mm -Weight: 20.1 kg Godpex Hv Nzefx Abdeil

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Gedpfxev Hchle Abdoil Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S Giedpfx Absx Hvyyodol -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW - with electrical cabinet - with cleaning brushes - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE - 1 year warranty Giodpox Szkbsfx Abdel READY FOR SALE

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: Giedpfx Aemnntmobdjl - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min Gisdpju Ng Ncofx Abdjl total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, Bench drill OPTIMUM D 23 Pro-Set OPTIdrill - Exhibition machine - ----- Technical data ----- Number of speeds: 12 steps, Speed range: 200 - 2,440 rpm, Spindle stroke: 80 mm, throat depth: 180 mm, Table size: 280 x 245 mm, max. drilling capacity in steel: 25 mm, Motor: 750 watts, Columns Ø: 73 mm, Dimensions (LxWxH): 615 x 330 x 1,015 mm, Weight: 63.5 kg, Spindle holder: MK 2 Bench drill with V-belt drive - Industrial motor - User-friendly safety switch in accordance with IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop switch - Precision spindle bore - Safety electrics with 24 V DC voltage - Guaranteed concentricity of less than 0.02 mm measured in the drill sleeve - Drill spindle with precision ball bearings - High-quality quick-action drill chuck - Drilling depth stop - Precisely machined, stable drill table with diagonal T-slots running diagonally and circumferential cooling water channel - V-belt cover with safety switch - One-piece cast aluminum Die-cast quill lever with soft-grip handles - Largely dimensioned, height-adjustable safety screen with safety switch - Heavy-duty design of the entire machine - GATES quality belt - Right/left rotation -- Scope of delivery Quick-action drill chuck 1 - 16 mm Morse taper MK 2 / B16, T-nuts Special offer set including machine vice BMS 100 Giedpfxeu R S Exs Abdol - new exhibition machine -

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING Gedpotnh Aljfx Abdeil SET OF MANUALS

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Giodpsw Syyyofx Abdol

Condition: new, - Drum length 5500 mm, diameter 2000 mm (equal to Doppstadt SM 620) - Motor 15 kW - with electrical cabinet - with cleaning brushes - screen mesh size according to customer´s choice, thickness of steel 8 mm - new machine manufactured in Europe - with manuals and CE Gjdpfxsx Szcdo Abdjil - 1 year warranty READY FOR SALE

Condition: excellent (used), Drill Bit Grinder Farman FC-80N (4-80mm) Grinding capacity: Ø 4 - 80 mm Angle adjustment: 40 - 180º Grinding wheel speed: 2,880 rpm Giodpfex Nkatox Abdol Grinding wheel: Ø 180 mm Machine weight: 400 kg Machine dimensions (LxWxH): 800 x 1,000 x 1,300 mm Scope of supply: - Documentation - 20x spare grinding wheels

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m Godpeu Ng Irofx Abdoil The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: new, Year of construction: 2025, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Motor 220V, 1300W, Speed 0-2600 rpm stepless Giedpfx Asbc Sa Djbdjl Standard clamping range Ø 30 - 250 mm Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: used, Year of construction: 2002, functionality: limited functionality, saw blade diameter: 450 mm, feed length X-axis: 9,000 mm, Automated drilling and sawing machine for processing steel profiles and flats. The machine is equipped with an automated 3-axis drilling unit and a circular saw for automatic profile processing. This is an ideal machine for a starting steel constructor who wants flexibility and the ability to produce profiles easily. The machine can drill and saw profiles up to 450mm wide. Gjdpfx Ajx E S A Uebdjil The machine is available at an attractive price, as the horizontal drilling motors require some attention (the bearings need to be replaced and one of the gearbox housings needs to be replaced). The asking price is for the machine 'as is', without transport/installation, etc. There is also the option to purchase repair, transport, and installation services, which can be discussed on site. Price upon request.

Condition: like new (used), Year of construction: 2022, Electric plate rolling machine Gijdpfxsxx Av Ae Abdjl Year of manufacture: 2022 Frequency inverter-controlled drive Capacity: 1050 x 1.0 mm

Condition: ready for operation (used), functionality: fully functional, Gang drilling machine with 4 units, gear transmission, and feed. One unit equipped with a thread cutting device. Tool holder MK 4. Gijdsx S U Uyepfx Abdjl

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm Gjdpfx Absu Ngxdjdsil incl. accessories *