Used Drum Debarker for sale (3,053)

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Fully automatic sequence of the reducing process Guodsztapvjpfx Ag Tjh Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Gsdpfegabfbex Ag Tjuh Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Year of construction: 2022, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Godpfx Agsd Tgzdj Tsuh Eggersmann Terra Select - T4 - T5 - T6 - T7 PRONAR - MPB 18.47 - MPB 20.55 - MPB 20.72

Year of construction: 2023, condition: used, The drum sieve REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction! Gjdporrvy Aofx Ag Teuh

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Godpfx Agomrrwfo Tsuh Please note that the photos probably show two different ovens, both are very similar.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Gjdpopbbmlsfx Ag Tsuh

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Godpfxevugf Re Ag Tsuh Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Gjdpfx Agev Uvvfo Tsuh Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Year of construction: 2023, condition: used, Our smallest drum sieve the REMAV RS1500 is designed for space-saving sieving and, with a small space requirement, can separate larger quantities of screenings and lay them over conveyor belts and in heaps! Guodpfx Agehg Epas Teh As a car trailer with street legal (80 km / h) with TüV it is easy to transport with 2.4 to total weight. Processing of all kinds of soils, broken rubble or compost - the RS 1500 is ideal for use in gardening and landscaping, civil engineering or pipeline construction.

Condition: new, Year of construction: 2026, ECS500 / ECS500 E Debarking and Trimming Machine • Weight: 150 kg / 250 kg • Drive: Hub drive PTO / Electric three-phase motor 5.5 kW Gujdpjr D Nk Nefx Ag Toh • Dimensions (L x W x H): 100 cm x 90 cm x 155 cm • 3-point tractor attachment • Blade disc diameter 500 mm • Blades are resharpenable and replaceable Price: €5,400 / €6,700

Condition: new, Wiedemann Entrindungsanlagen is a family-run company with decades of experience in wood barking for both stationary and mobile applications. Gedpfx Agjtzfqbe Teuh We are manufacturers of mobile debarking machines with rotor openings of up to 100 cm. For further information please contact us by e-mail or telephone.

Year of construction: 1982, condition: used, Machining units: from 3 sides Gedpfxjcqydre Ag Teuh Machine has 6 stations: with a horizontal main spindle Notes: Primarily suitable for precision-bored parts, but also for armature parts and shaft parts that need to be machined from two sides.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Gujdpox N Dqlofx Ag Tjh Technical condition: good Description: Beer keg clamp Year 2019 ISO 3A (51 cm) Capacity 2000 kg Width 1020 mm Forks 1200 mm ID OS1754

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Guodpfx Ajx N U R Asg Toh Condition: Ready for use and fully operational Technical condition: good Description: Beer keg clamp Year 2019 ISO 3A (51 cm) Capacity 2,000 kg Width 1,020 mm Forks 1,200 mm ID OS1761

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Gujdpsynzg Hsfx Ag Toh Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 Gusdjy D Hy Ejpfx Ag Toh • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface Gedpfx Aey Eknceg Touh - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm Godpfx Agey Iabde Tsuh With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MM3146 230V Drum Roller Sander for Wood is an efficient, single-unit sanding machine designed for finishing flat surfaces made of solid wood, furniture boards, metal components, and plastics. Thanks to its robust construction, precise guidance system, and large-diameter sanding drum, the machine provides uniform surface finishing with high working efficiency. It is an ideal solution for production facilities, woodworking workshops, and companies involved in renovation and finishing processes. Main advantages of the machine Reinforced construction – a rigid, heavy-duty frame minimizes vibrations and ensures stability even during intensive operation. Gujdpjw Hb Atofx Ag Teh Precise sanding thickness adjustment – a mechanical height gauge allows accurate setting of the required machining dimension. Precisely balanced sanding drum – made of drawn aluminum, it ensures even contact with the workpiece and effective cooling. Universal application – suitable for removing old paint, varnish, corrosion, as well as smoothing and deburring surfaces. Metal drive coupling – provides durable and reliable transmission of torque from the motor to the sanding drum. Working width up to 920 mm – allows sanding of wide panels using a double-pass method. Construction and technology The CORMAK MM3146 stands out with its solid industrial construction. The 1.5/2.2 kW (S1/S6) main motor, combined with a reinforced 60 W feed drive, provides sufficient power reserve for intensive, long-term operation. The variable feed speed system (0–4 m/min) allows adjustment of the working pace depending on the material type and required surface quality. The sanding belt measuring 2100 × 75 mm drives a high-speed roller (2800 rpm), enabling fast and effective material removal. The aluminum sanding drum cools itself during operation, eliminating the risk of overheating the work surface. The side guide has been additionally reinforced, improving parallel alignment and sanding stability across the entire working width. Precision and working efficiency The CORMAK MM3146 drum sander guarantees repeatable results thanks to its mechanical height adjustment system with a precise scale. The minimum workpiece thickness is 3.5 mm, while the maximum is 100 mm, allowing the processing of both thin panels and solid structural elements. The working width of 460 mm in a single pass (or 920 mm with double guiding) provides production flexibility, even when processing larger batches of components. Standard equipment Precision aluminum sanding drum Metal drive coupling for the sanding drum Working table 460 × 465 mm Conveyor belt 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Dust extraction port Ø62 mm Technical specifications Parameter Value Motor power S1/S6 1.5/2.2 kW, 230 V Belt speed 2800 rpm (for wood and metal) Sanding belt size 2100 × 75 mm Feed belt size 1120 × 450 mm Working table dimensions 460 × 465 mm Extraction port diameter Ø62 mm Feed speed 0–4 m/min Minimum material thickness 3.5 mm Maximum working height 100 mm Working width 460 (920) mm Reinforced feed motor 60 W Machine dimensions 880 × 540 × 1230 mm Net/gross weight 134 / 160 kg

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Gujdpfx Aow Hxuyeg Toh

Condition: new, functionality: fully functional, Cooling capacity • Throughput 800 kg/h Godpfow Snbfex Ag Tjuh • Product inlet temperature 140°C • Product end temperature

Year of construction: 2026, condition: new, Galvanized. 1. Rotary screen, 1600 mm, length 4880 mm, 4 mm woven wire (optional - 5.0 mm sheet metal at an extra charge), perforation 20 x 20 mm (or other upon request), drive 4 kW, drum speed approx. 14 rpm, 2. Receiving conveyor (under the drum). Length 3700 mm, width 800 mm, 3. Undersize material elevating conveyor. 4000 mm long, 650 mm wide, up to 2500 mm high, drive 3 kW, 4. Oversize material elevating conveyor. Length 4000 mm, width 650 mm, height 2500 mm, drive 3 kW, 5. Hopper with a length of 3000 mm, a width of 1800 mm with adjustable belt speed via a variator. Drive 3 kW, 6. Semi-mobile. Mounted on a chassis with wheels and a lower trailer hitch, 7. Cleaning brush with a diameter of 300 mm, length 4000 mm, 8. Drum drive via a gearmotor + 2 rubber drive wheels with a diameter of 230 mm, 9. Hour meter, 10. CE certificate, 12 months warranty, manufactured in EU (Poland), 11. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 12. Weight: approx. 3.5 tons, 13. Tramec durable gearmotor (with speed control in the hopper), 14. FAG and SKF rolling bearings, 15. Structures made of closed steel profiles - steel grade S355, 16. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 17. Drum construction is protected against corrosion - hot-dip galvanized (!), 18. Drum structure - S355 steel. Wall thickness 3 mm, perforation to be agreed upon (optional), 19. Brush with adjustable spring. The brush pressure can be adjusted, 20. Electrical sockets and emergency stop switches, on both sides of the machine, 21. Drum covers. Powder-coated in the painting booth. The final technical specifications (length, width, perforation, additional components, etc.) are always agreed upon individually with the customer according to their needs. Sand. Black soil. Coal. Mixed waste. We prepare the machine according to your requirements. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length - on request, 3) Electric, diesel-electric. Gedpfx Ajd Rzy Njg Touh We have many references in the European Union. We speak Polish, German, English and Russian.

Condition: used, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 700 m/min, CAMBIO 66 roundwood debarker with CAM TOOL knife system. Equipped with mechanical rotor. Comes with centering conveyor and additional rollers after the debarker. In full working order after major overhaul. Gjdpfxstcu Uae Ag Touh

Year of construction: 2024, condition: new, Manufacturer of Drumscreen. We can build all of drumscreens, All models available on the market. Many in stock ! Doppstadt - SM518 - SM618 - SM620 - SM720 - and other models Farwick Komptech - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Eggersmann Terra Select - T4 - T5 - T6 - T7 PRONAR Godpfothl T Uox Ag Touh - MPB 18.47 - MPB 20.55 - MPB 20.72 Any mesh size square 10x10 15x15 20x20 30x30 40x40 50x50 60x60 70x70 80x80... round diameter 10 20 30 40 50 60 70 80 mm... hexagon 10mm 20mm 30mm 40mm 50mm 60mm 70mm 80mm Drums made of special steel!

Year of construction: 2026, condition: new, DRUM SCREENS – TOP-QUALITY MADE IN EUROPE | FOR ALL POPULAR SCREENING MACHINES We supply high-quality drum screens manufactured to exceptional European standards – precision-fit for numerous machine models: Compatible with, among others: - Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725 - Terra Select T4 – T7 - Komptech Maxx, Mustang, Nemus, Cribus - Pronar, Terex, Neuenhauser, and many more Technical Specifications: - Custom production according to your requirements - Perforation: round or square - Arrangement: straight or staggered Gjdpfx Aey Dpgujg Teuh - Minimal web widths for maximum screening capacity - Welded-in spiral for optimal material flow - Various material thicknesses available - Premium, sharp-edged perforated plates made from special steel Your Benefits: ✔ Top-quality manufacturing from European production ✔ Many models available immediately from stock ✔ Fast delivery throughout Germany (EU delivery on request) ✔ Short lead times ✔ Attractive and competitive pricing Contact us now to receive your individual offer! Our experienced team is happy to provide prompt, expert advice. Many models available for immediate delivery from stock Delivery within Germany (EU-wide on request) Short lead times and fair prices Get in touch with us for your customized quote!