Used Drying Cabins for sale (6,903)

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 Godpfez I Dziox Al Sjbu - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, power: 26.7 kW (36.30 HP), We are offering this used Hobart 305GH dry steam convection oven / rapid steam oven, manufactured in 2017. Model: 305GH Serial number: 970221933 Rated voltage: 400 V Frequency: 50/60 Hz Phases: 3+N Godpfsz Riwcsx Al Sjbu Connection power: 26.7 kW Current: 38.7 A Water inlet pressure: 1.7 - 10.0 bar Operating pressure: 1.0 bar Protection class: IP33 ML number: 305GH-31 Year of manufacture: 2017 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood Gsdoz I Threpfx Al Sjbu - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Gbjdpfx Alozvxxnj Ssu Please check out our other listings and subscribe to our stock list.

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Gjdpfx Ajy H I Ngel Sjbu Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Gbsdoy H Dv Aspfx Al Seu • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Grant Instruments QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Gjdpjxv Az Hofx Al Sjbu Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions Gedpfsxwc Nmsx Al Sebu 2 second block exchange due to quick release system of SmartBlock

Condition: used, This listing is for the Grant QBD2 Dry Block Heater Godpfsxv A R Iex Al Ssbu The unit is in full working condition and is ready for immediate use The QBD2 Grant block warmer is a versatile, general purpose dry block heating system with 2 custom made blocks The Grant QBD2 is a high-performance digital dry block heater designed for accurate and consistent sample heating in a wide range of laboratory applications. Ideal for molecular biology, clinical, and general lab use, it offers flexibility with interchangeable blocks and customizable features.

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Gbsdexv Dawspfx Al Sou Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. The Grant QBD1 is a versatile laboratory dry block heater with digital temperature control and capacity for one removable, interchangeable heating block. It provides an ambient +5°C to 130°C temperature range, with ±0.1°C stability and uniformity. Dimensions are approximately 200 x 240 x 120 mm and weight is 2.2 kg. Heating blocks are interchangeable and purchased separately Godoxv Dvlopfx Al Sobu Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the mos

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Gbsdpfszxggljx Al Ssu Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Gbedpfx Ajxzh Shel Ssu Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service performed by Asco was in December 2016 at 12,032 hours. After the service, the system only operated for an additional 603 hours because investment was made in a brand new production line. The machine has a total of 12,635 operating hours (12,032 hours since the last service + 603 additional hours). The machines come from a large industrial factory that changed its production setup and switched to a different equipment brand. This change is the reason these machines were taken out of production and are now available for sale. The machines are used, fully functional, and in good working condition. The main technical specifications, year of manufacture, and operating hours are listed in the advertisement. Gedpfjy R I Uqsx Al Sobu Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, This listing is for a Thermolyne 16500 Dri-bath DB16520 Gbsdjxzh Nmjpfx Al Sju The Thermolyne 16500 Series Dri-Bath (Model DB16520) is a laboratory dry block heater designed for applications requiring precise, stable temperature control for sample incubation, enzyme reactions, and other heating applications, without the need for water. It is part of the Barnstead/Thermolyne brand, recognized for its modular block design and high-quality construction.

Condition: good (used), Year of construction: 2012, Colortronic Dry-Flex M400 Granulate Dryer, Plastic Dryer For sale is a used granulate dryer, type Dry-Flex M400, manufactured by Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Gbsdpfx Aloxlqzts Ssu Application area: Plastic processing, injection molding, extrusion Condition: Used, functional Buy the Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy goods from professionals for professionals – In our SHOP you will find more attractive offers. You can find more new and used items in our shop! International shipping costs on request!

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume. For sale is a used industrial drying cabinet from the manufacturer Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable grid shelves, an insulated door with an all-round seal, and a control and operating unit located on the side. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam chamber volume: 0.998 m³ Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are the manufacturer's specifications for the model size VTL 75/100. Deviations are possible due to the specific equipment. Equipment: Electrical heating Gbedjz N Am Iopfx Al Sju Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and operating unit Several removable grid shelves Insulated drying chamber Single-wing door with all-round seal Side control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Areas of application: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of delivery: 1 × Vötsch VTL 75/100 industrial drying cabinet Grid shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. For inquiries or to arrange a viewing, please contact us at Dr. Dryice. Gsdpfx Alswg R Rmo Ssbu All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that convinces! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping possible upon request ⏰ 48-hour EXPRESS DELIVERY possible after down payment! The standard delivery time varies depending on stock levels between 1 working day and approximately 15 weeks. 🔧 Please note: Additional options can extend the delivery time. 📩 Ask the seller in advance whether your chosen options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire purchase ✔️ Leasing ✔️ Warranty programs 📞 Contact us – we will find the best solution for your budget! ✨ Strong. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three most common cabin sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard cabins in a modular way to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Gedjipvuljpfx Al Sobu Top-class wet spray booth & drying system 📐 Technical data (internal / external): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air handling unit: 1350 x 2900 mm 🔧 Performance features: 🌬️ Vertical airflow over a full-surface ceiling air supply plenum – for even, dust-free painting 🚪 3-panel main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – fast heating to 60–80 °C in 8–15 minutes 🔇 Low-noise, high-performance fan with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99 % High-temperature heat exchanger made of special steel 🧼 Filter technology at the highest level: ✅ Pre-filter (tear-resistant, up to 100 °C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control over ventilation, heating, lighting and safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Air handling units can be flexibly positioned – can be mounted to the right, left or rear of the cabin ➕ Optional equipment (at extra cost): 🪟 Panoramic door – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Ex-protected lighting (Exproof) 🌪️ Ex-protected fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ The choice of special equipment can extend the delivery time. Please agree on your options with our sales team in advance. 🚧 Assembly costs are not included in the price. 📍 These depend on your location – we will gladly prepare an individual offer for you! ☀️ 2 YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. New price: €35,000. Excludes applicator nozzles and hoses. This machine is suitable for industrial cleaning, including large-scale projects. An advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose Gbjdpfxsznnyxo Al Sju 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which makes it reliable and cost-effective to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines are also available. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Gbedpfx Aezxzrpel Sju Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Gbedpjz Dtukjfx Al Sou

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Godswg R Edopfx Al Ssbu Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Year of manufacture: 2022 Gbjdjzlr Dcspfx Al Sou Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Gbsdpfx Asz Rn Dnsl Seu