Used Dust Colector for sale (26,977)

Year of construction: 1994, condition: excellent (used), For sale are 2 pieces coal dust silo Capacity: 120 m³ per piece Material silo: S235 Material extraction cone stainless steel from Ø 250mm to Ø 1450 mm diameter: 3,40 meters Height silo: 20,6 meters Total height: 24 meters Weight: 22 tons Explosion flap: DN 1300 Implosion flaps: 2x DN 500 Silo filter: Ø900mm Infra Jet AJP 304 (30m²) Bjdoh Dix Iopfx Adledk filling pipe: DN100 extraction cone: 70 ° Air loosening with 6 nozzles Level measurement: Endress Hauser Soliphant Extraction dosing dense phase conveying Manufacturer Altmayer Airdos PDF 800 Rotary valve DN 250 manufacturer Kreisel Dismantling is already done, silos are in stock and immediately available.

Condition: used, functionality: fully functional, Dust extraction system, used. Filter fabric new. Includes 35 kW fan. Includes control cabinet. Bedpfswt Rhrex Adlsdk

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. Bodpfx Adjl Dw U Deledk The price given in the ad for 1 piece.

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Bdodpfoihu T Tex Adlok

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm - Width: 1000 mm Bodpfoium Ipjx Adlsdk - Depth: 1000 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: V-006-11, volume flow: 3,300 m³/h, Extraction filter device for filtering dust and small sawdust with a large filter surface and large collection bags. Used on CNC as a drain for wood dust and sawdust. Including motor. Bsdpfswgb H Eex Adledk

Condition: new, Holzprofi Maker clean air extraction system with double chip filtration. The first cleaning works via a cyclone, the second cleaning via a filter cartridge. Includes remote control. Nominal volume flow 3700 m³/h Extraction nozzle 200 mm Branch 200/100/100/100 Negative pressure V/min 2800 Pa Motor rated power 3 kW 400V Chip collection volume 240 liters Weight 170 kg Dimensions W / D / H 1200/820/2150 Filter area 4.32 m² Chip bags to be used: AB-SP300 AB-SP100 Bjdpevrv Amjfx Adlsdk

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Bdodpfx Adjh Ucqtjljk (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg Bdedpfxoib Dads Adlok

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 Bsdpjvhcnzefx Adlsdk - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Bdodponyhvqefx Adlek Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h year of production : 1993 Bdsdpjtixlbjfx Adlek Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Bodpjuy N S Uofx Adlodk Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . Bdjdpfjrwm Izsx Adlek The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. 4 Kw fan. Capacity - 3600m3/h year of production : 2003

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. Bjdpfx Aomrm Rasdlsdk 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Ultra WEB filter cartridges 18 pcs.

Year of construction: 2005, condition: good (used), Dust extractor,welding fume extractor by HERDING. Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Bodpfx Adjpgnfdjljdk Integrated control cabinet with microprocessor to control all components. Herding MULTICOATER - (for sticky dust) for automatic addition of filter additives to protect filter media. 4 Kw fan Capacity - 800 m3/h Herding® DELTA or DELTA² filter elements Filtration area - 14.56 m2

Condition: excellent (used), Year of construction: 2007, filter area: 28 m², volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Bdsdpferp D Nasx Adlok Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 7.5 Kw fan Capacity 6 000 m3/h Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Technical documentation included.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Bedpfx Ajn Nw Ntedljdk Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket Bdsdpeg Rhfbofx Adlek 11 Kw fan in sound absorbing housing Capacity 3500m3/h Negative pressure 7000 Pa Filtration area 24 m2 Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.

Year of construction: 2014, condition: excellent (used), Professional pneumatic cleaning cabin with dust extraction. It is used in power plants, cement and gypsum factories, mills and mixing companies, also in the chemical industry As in the metallurgical industry, dust can have a very negative impact on the health of personnel. By using cleaning cabins we prevent dust and hazardous substances from being carried Bedpfx Adohm E S Aoljdk into toilets, changing rooms etc. The cabin provides personnel with a simple option to to clean themselves during working hours, e.g. before The cabin provides staff with a simple option to clean themselves during working hours, e.g. before and during breaks in the morning and at midday and at the end of the shift. Exhaustion made in EX version Year of manufacture : 2014 Filtration surface: 16 m2 Capacity: 2500m3/h Vacuum: 2400 Pa The device is in very good condition

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Bedpotq Ufvjfx Adlodk Mag. no: 0848/2

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Bdsdotpwrqspfx Adlsk Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. Bdodpfxorhidmo Adlek The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Bdjdpfxehqd Tve Adlok Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Bjdoiu Hq Dopfx Adlodk Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m