Used Dust Collection for sale (8,663)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, Nedpfx Asyi Efcjbujlh - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Njdpfx Abofz Dq Ajuolh Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Nsdpfx Ae Aaz S Asbujlh Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding Nlsdpsz Ib Elofx Abush - Chip conveyor - Operation and maintenance manuals - CE certification

Condition: good (used), functionality: fully functional, input voltage: 230 V, input current: 11 A, For sale is a high-quality RINGLER industrial vacuum cleaner, type RI 332 W2E-M, in a robust industrial design. This vacuum cleaner is ideal for professional use in workshops, CNC manufacturing, metal and wood processing, and many other industrial sectors. It is suitable for both vacuuming dust, chips, and dirt, as well as for collecting liquids, making it versatile. Technical data: * Manufacturer: RINGLER * Type: RI 332 W2E-M * Connection: 230 V / 50 Hz * Power: 2.6 kW * Current consumption: 11.8 A * Protection class: IP44 * Motor speed: 15,000 rpm Nsdpfx Abjz Ht D Rsuelh Inspection and functional testing are possible by appointment. Shipping is possible. Note: This is a commercial sale. The stated price includes statutory value-added tax (VAT). You will, of course, receive an invoice with VAT shown. Subject to prior sale, errors, and changes.

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Nljdjwfrl Aepfx Abueh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle Nlsdpeyv In Iofx Abush • User and maintenance manual and CE declaration of conformity

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Nodpfxenyhvqj Abuslh system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 2011, condition: like new (used), Ross Industries A10 Tray sealer Serial: 406 Nodolnp Agspfx Abujlh 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only) Nedpfoy Etqmox Abuolh

Condition: excellent (used), Filling machine, TM Industry Belgium, Model M 25 For filling liquids Njdpfx Asiu H Uvobuslh Filling range: 0.5 - 30 kg In very good condition, directly from production!!!

Condition: used, Chip dust suction filter, with automatic filter cleaning (wash control with blowers and Macair panel) at 1 bag. Motor-powered lathe, optional Euro 500 + VAT Njdpfx Abotxdpxouelh Suction motor power:: Kw. 4 Filtration size: Main tube mouth mm. 250, deviations mm. 150 each

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2 Nsdpfetq Ufvjx Abuelh

Condition: good (used), Year of construction: 2003, RIBO BE-AL-F1 dust extraction , water extraction vacuum filter, separator for grinding , polishing , cutting , brushing , deburring , aluminum and metals wet. Nljdpfxotpwrqo Abuoh Extraction made of stainless steel. The vacuum fan is located behind the filter on the clean side, which reduces the risk of explosion initiation to a minimum. Ideal filter for extracting and filtering hot and flammable or highly hygroscopic dusts that do not allow the use of traditional cartridge or bag filters, guaranteeing reduced maintenance costs. Recommended for use in mechanical workshops, it is ideal for grinding, brushing and metal polishing departments. Eex 1.85 Kw fan Capacity 1600 m3/h Vacuum of 2500 Pa

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Nlodpfx Aovvw Niobujh

Condition: new, functionality: fully functional, Year of construction: 2016, operating hours: 40 h, heating capacity: 12 kW (16.32 HP), product height (max.): 60 mm, product length (max.): 60 mm, product width (max.): 60 mm, machine/vehicle number: 40017, The KSN Drum Washer 350 UST Ultrasonic is an industrial cleaning system designed for efficient and thorough parts cleaning. Combining drum washing with ultrasonic cleaning technology, the system is particularly suitable for components with complex geometries, holes and cavities, as well as applications with high cleanliness requirements. Ultrasonic cleaning uses high-frequency sound waves in liquid to effectively remove contaminants while providing a gentle cleaning process without mechanical wear. Standard equipment: Siemens PLC Grundfos pump Nljdpfx Ajzy Euwjbujh Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Year of construction: 2022, operating hours: 50 h, condition: new, functionality: fully functional, heating capacity: 12 kW (16.32 HP), product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 43865, The KSN Drum Washer 350 WRD is an industrial cleaning system designed for efficient and reliable parts cleaning in automated production environments. The system combines washing, draining, rinsing and drying in one automated process, ensuring consistent cleaning results while reducing manual handling. The rotating drum provides continuous movement of the components throughout the cleaning process, making the cleaning system particularly suitable for industrial applications requiring efficient and repeatable processing of parts. Designed for continuous operation, the Drum Washer 350 WRD can be integrated into existing production lines and contributes to increased productivity and reduced operating costs. Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring Nljdpfxozy E Dre Abush Technical specifications can be found in the attached PDF document.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Nodozn Rdmspfx Abuolh Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: used, Year of construction: 2003, Horizon TRC-16A2 Air Suction Collator (Used, 2003) Type: Air Suction Collator Configuration: TRC-A2a + TRC-A2b Number of Stations: 16 Bins Application: High-speed collating of large-format sheets Language: Japanese Collating Capacity: Nodpszphabofx Abujlh 170 – 2,400 sets / 1,000 – 3,000 sets During independent operation of unit A or unit B, any two bins may be selected. During synchronized operation of units A and B, only bins 1 and 2 of unit A are available for selection. Power Requirements: Power Supply: 200V 3 Phase 50/60 Hz Power Consumption: TRC-16A2: 7.0 kW (50 Hz) / 7.4 kW (60 Hz) Motors: TRC-16A2: 3.7 kW × 2, 0.4 kW × 2, 0.15 kW × 1

Condition: used, Tilting container for forklifts, RMS Rotherm Mechanical Systems, type KK - 125 Chip container - bulk container - folding container Manufacturer's No.: 89218 Year of manufacture: 2012 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork pockets: 200 x 60 mm Fork spacing, inside/outside: 505/900 mm - Manual locking device for the tilting container - Tilting process is initiated by gravity Nodpsz Rnb Hofx Abuelh - 4 plastic support rollers, Ø 175 mm, 2 swiveling, 1 with locking mechanism - Fork pockets / forklift receiver Weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with frame: 1200 mm Very good condition Suitable for collecting, storing, and transferring valuable materials.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D00987, type of input current: three-phase, input voltage: 400 V, temperature: 5 °C, power: 50 kW (67.98 HP), input frequency: 50 Hz, Equipment: documentation/manual, CRETEL / ELIONA INDUSTRIAL WR100.125.190 industrial washing machine – Year 2011 Washing machine for carts, trays, molds, and bakery containers. Suitable for carts up to 1000x1250x1900mm. Equipped with 2 tray carts. Nsdpozpfkwjfx Abuelh

Condition: new, sheet length: 4100sheet thickness: 25prebending: 20Upper Roll Diameter: 460Bottom Roll Diameter: 420Side Roll: 360motor: 22messurements (LxWxH): 7270 x 2585 x 2300weight approx.: 34400 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.400,-- - Automatic material extractor - PLC control - CNC control Nlsdpfxed Ab Rds Abush - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Nlodpfx Aboz Szalsuoh Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; OPERATOR'S WORKING PLATFORM ; ETHERNET PORT ; Njdpfx Ajx Ru Azebuolh USB PORT ; SPINDLE COOLING SYSTEM ; LINEAR SCALES ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg Njdpfx Ajwl R Agsbuolh