Used Mobile Extraction System for sale (9,910)

Condition: new, Year of construction: 2025, Chip extractor ASA 2803 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Pjdpfxohk S Sdj Adijrd Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 120 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 2 x 120 mm Length approx. 1500 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 53 kg Electrical data Idle speed 2950 min¯¹ Input power 2,2 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 1,92 m² Noise emission Sound pressure level max. 87.5 dB(A) Volume flow Nominal volume flow 2800 m³/h Negative pressure max. 1900 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2021, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. Designed for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with dust-free collection. The mobile KEMPER MaxiFil Clean cartridge filter is intended for continuous operation and is suitable for filtration of welding fumes and high-concentration dusts. Pedpfx Ajtq E Siediord Suitable for use in all welding methods of carbon steel, low-alloy and high-alloy steels, as well as aluminum. Economical to operate thanks to the long service life of the filter cartridge. With IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Comes complete with a Start-Stop system for automatic switching of the unit on and off. Specifications: - Airflow: 1,100 m³/h - Maximum vacuum: 3,200 Pa - Three-phase fan, 1.5 kW - Filter surface area: 15 m² - Year of manufacture: 2021 - Cartridge filter element with PTFE membrane - Filtration efficiency: >99.97% - Built-in delay timer in start-stop mode. - When connected to a start-stop sensor (optional), the extraction delay time after welding can be set from 5 to 60 seconds. - The unit is in very good condition. Stock no.: 0976

Condition: used, Year of construction: 2024, Motor power: 1.5 kW Inlet nozzle: NW 120 mm Rated air flow: 814 m³/h Vacuum at rated flow: 2,180 Pa Filter area: 5.1 m² Manual cleaning including integrated pre-separator Collection container: 135 L Location: Nattheim Prsdpjxbhz Aefx Adisd

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Prodpfx Adjxn Tilsijd Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 12641245, type of input current: three-phase, overall weight: 82 kg, input voltage: 230 V, volume flow: 600 m³/h, noise level: 73 dB, space requirement width: 770 mm, space requirement length: 1,145 mm, input frequency: 50 Hz, Equipment: type plate available, The FilterCart Carbon mobile filter unit is specially designed for odor removal. The FilterCart Carbon includes the standard extraction arm and can optionally be equipped with a HEPA filter. Applications: Solvents, smoke, and other gas contaminants. Condition: Slight signs of wear (minor damage to the PVC hose – see image), as the mobile filter unit was only used a few times as a demonstration unit. Product Description • Durable disposable filter with a large filter surface • Ready for immediate use • Filter housing with clamping lever lock • Robust chassis with 2 swivel casters and 2 fixed wheels • Easy to maneuver Protection class: IP42 Material: Rotationally molded plastic housing. Extraction arm made of PVC hose and aluminum rods. Fan made of steel and aluminum. Podpewfrggjfx Adisrd Extraction arm diameter: 160 mm Arm length: 2 m Filter material: Activated carbon

Condition: excellent (used), Year of construction: 2022, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 22001476, input voltage: 230 V, overall weight: 115 kg, total width: 684 mm, total length: 692 mm, total height: 1,441 mm, volume flow: 950 m³/h, filter area: 1.2 m², power: 0.51 kW (0.69 HP), input frequency: 60 Hz, Equipment: documentation/manual, type plate available, ESTA Table Box Active Mobile Odor Filter Airbox / Extraction Device / Extraction System - Mobile single workstation extraction unit with energy-efficient fan and activated carbon filter for capturing gaseous and fume pollutants - The extraction system currently has only 9 operating hours - Extraction table with GRP grating (robust, corrosion-free, gentle on materials) Psdpfx Ajwbfkdodijrd - Additional hood made from corrosion-free aluminum sheet for improved capture of localized emissions on the grating The extraction system is intended for extracting gaseous environmental pollutants, such as smoke, for example. ATEX classification not available, not Ex-protected All technical specifications are subject to errors/typing mistakes. Price on request Sale exclusively to EU countries.

Condition: new, Year of construction: 2025, Chip extractor ASA 1903 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 110 l Nominal width outside suction nozzle inlet 203 mm Nominal width outside suction socket outlet 1 x 100, 1 x 120 mm Length approx. 1000 mm Width/depth approx. 500 mm Height approx. 2100 mm Weight approx. 39 kg Electrical data Idle speed 2950 min¯¹ Input power 1,5 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 1,92 m² Noise emission Prjdpfohk S Shex Adiod Sound pressure level max. 85.7 dB(A) Volume flow Nominal volume flow 1900 m³/h Negative pressure max. 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels Pjdpsvvcqxjfx Adiord dimensions: 100x100x80 cm weight: ca 120kg

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Pjdpfx Adsxvpumsijrd Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg Podpoxnqauofx Adierd To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm Prodpfst Hurxox Adiod - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air Podpfx Adsvrv E Ijisrd residual dust content H3 (

Condition: new, Year of construction: 2025, Chip extractor ASA 4303 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 215 l Nominal width outside suction socket inlet 260 mm Pjdpfx Ajhk S Sljdisrd Nominal width outside suction socket outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Input power 3,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2,4 m² Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Negative pressure max. 2000 Pa Scope of delivery: Two filter bags, two chip bags. Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Extraction capacity: 4200 m³/h Prsdexbf Rbopfx Adiod Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, type of input current: three-phase, filter area: 28 m², negative pressure: 1,800 Pa, total height: 2,930 mm, total width: 1,250 mm, total length: 2,340 mm, nominal flow rate: 4,200 m³/h, input voltage: 400 V, suction capacity: 6,160 m³/h, power: 7.5 kW (10.20 HP), rotational speed (max.): 3,000 rpm, input frequency: 50 Hz, pressing: 1,800 Pa, *Exhibition unit *Only in operation for 5 hours *Extraction unit in mint condition *New filter elements *Atex fan *Immediately available Psdpfx Aowgpl Aodiord *Other units available upon request *Plug-in ready

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Psdpfx Adjxnprcjisrd Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2023, machine/vehicle number: 0790, Offer 25156 Technical data: Psdpfxsxdbyqe Adisrd - Airflow approx. 240 m³/h - Connection nozzle 50 mm - Drawer - Collection container - Drive power 400 V / 1.5 kW - Required space (W x H x D): 1000 x 1500 x 650 mm - Weight approx. 120 kg

Condition: as good as new (ex-display), Demonstration machine Podpjvrvr Isfx Adierd Technical data: Engine output 3 HP at 100% duty cycle, voltage 400V, suction capacity 3900 m³/h, suction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kg Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Pedpohk S Szjfx Adierd Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: used, Mobile Dust Extraction Fritz Moeller Prjdpfx Adjddxl Eeiod

Condition: used, Year of construction: 2017, machine/vehicle number: 117119, Ref. no. 25158 Technical specifications: - Airflow approx. 220 m³/h - Dust class M - Connection nozzle: 50 mm - Drawer - Pneumatic connection Pedpfoxay D Hsx Adijrd - Drive power: 400 V / 1.3 kW - Required space: W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Prsdpfshk S S Eex Adisd Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Psdpfx Adjhk S Steijrd Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Psdohk S Swepfx Adiord Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: excellent (used), Year of construction: 2007, filter area: 28 m², volume flow: 6,000 m³/h, negative pressure: 2,700 Pa, intake manifold diameter: 300 mm, Sawdust extractor, dust extraction, self-cleaning filter, vacuum brand Hoecker Polytechnik Model: EA 300-7A with pneumatic cleaning of filter bags during operation Year of manufacture 2007 7.5 Kw fan Capacity 6 000 m3/h Filtration area 28 m2 Vacuum pressure 2700 Pa Air return Capacity of dust tanks - 495 l Equipped with automatic fire protection system Inlet diameter 300 mm Prodpfxjrp D Nae Adiod Technical documentation included.