Used Eisele Vms 120 for sale (115)

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Bodpfjt H Ibmox Afljlr Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Bjdew Ddztopfx Aflelr Pneumatic material clamps Micro spray device Saw table can be rotated in both directions

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 450 mm, type of input current: three-phase, input voltage: 380 V, length stop: 4,000 mm, Cold circular saw Eisele PSU 450, well-maintained and fully functional condition, with electro-pneumatic length stop, including various segment and solid steel saw blades. Blodpfxsw U Ahro Afler

Condition: used, Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm Bodpfx Afsc Ir Dvjlolr -Weight: 238 kg

Condition: used, saw blade diameter 275 mm Blsdpfx Afswglgiolsr cutting diameter bis 90 mm cutting range flat 120 x 75 mm turning speeds 40/80 U/min miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: Bsdpfxew D T Uis Aflelr - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm Bljdjmb U E Ajpfx Afler - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Year of construction: 1998, condition: used, Long-cutting saw for cutting aluminum profiles with feed pusher in very good condition Bledpfx Afjwx I Hvslsr Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed length of the material pusher 6,200 mm The system is disassembled in our warehouse Further technical data on request

Condition: good (used), functionality: fully functional, Technical data : Saw motor, pole-changing 1.0 / 1.6 kW 6 cutting speeds : Motor speed 1/2 8 , 10 , 12.5 m/min and 16 , 20 , 25 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm . Saw blades 315 / 360 mm Hydraulic saw feed Hydraulic material feed, min. 10 mm Hydraulic material clamping 2 additional saw blades . --> --> Special price : EUR 4.150,-- net , free loaded ! . Bledpfjxbbi Tsx Aflsr .

Condition: used, Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg Bjdpjb Hw Dbofx Aflelr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 360 kg, • Dimensions (W × H × D): 900 × 1,180 × 750 mm • Weight: approx. 360 kg • Drive type: hydropneumatic • Operating pressure: 8 bar • Air consumption: 40 l / stroke at 8 bar • Pressing force: 32 kN at 8 bar • Pneumatic connection: R ¼" • Press stroke: 17 mm Blodpfx Afoxl Hq Roler • Return stroke: 140 mm • Maximum pressing height: 150 mm • Maximum profile height: 210 mm

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Bodpsw D Et Rjfx Aflolr

Condition: good (used), Year of construction: 1990, machine/vehicle number: 2455, Offer 25293 Technical data: - Max. profile height up to 160 mm - Max. profile width 100 mm - Repetition stroke 100 mm - Punch stroke 20 mm - Punching force at 6 bar: 35 kN Bodpfx Afjxdh Uzoljlr - Operating pressure: 6 – 8 bar - Air consumption per cycle approx. 30 l - Equipped with: - Foot switch - 2 vertical pneumatic hold-down devices - Adjustable punching heads - 2 swiveling support arms - Required space approx. W 980 x H 1400 x D 800 mm - Weight approx. 180 kg

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos Bedjqzmnuspfx Aflelr

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Blodpfx Afsrz Rw Relor Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: new, Year of construction: 2024, universally usable due to double adjustable punching body for corner angles with groove dimensions of 25 - 60mm and profile chamber offset 0 - 40mm steplessly height-adjustable feelers, punching knives and backer inserts stylus and punching body are provided with scales retractable abutment for easy insertion of profiles, self-adjusting when moving forward against the profile hydraulic locking of the backer pneumatic pressing operation via a lever system ensures a synchronous punching process 2 pneumatic hold-down cylinders for clamping the profiles 2 eccentric disks for positioning the frames 2 swiveling profile support arms Bljdpfxshmfyho Afler operation via 2 foot valves incl. standard tools

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 Bljdpfjl Skl Ijx Aflor shipping EU ~300euro

Condition: used, Year of construction: 1995, machine/vehicle number: 9104, Offer 24237 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - horizontal 400 x 3.5 x 40 mm - Notching range / notching depth vertical 135 mm - Notching range / notching depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade can be manually tilted 90° - 30° via handwheel - Can be used as a shifter saw without horizontal saw blade - Profile stop shoulder 30° - 90° - 30° tiltable Bjdpoub Sl Defx Aflslr - Digital display - Pneumatic material clamping vices - Pneumatic coolant testing device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: used, Year of construction: 1996, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Blsdsv S D Ikopfx Aflor Weight: approx. 280 kg

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm Bledpfx Afstq Takjljr - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Bledpfxjvmz R So Aflsr coolant lubrication

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Bodow Nhumopfx Aflolr Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Year of construction: 1993, condition: used, Cutter diameter: 300 mm Bedpforv A Hmox Aflolr Max. release width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Bodpow R S Nwjfx Aflslr Technical specifications: - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Bjdpoq Awg Esfx Afljlr