Used Eisele Lms 2 for sale (109)

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm Iasdpfxeb N Eicj Aa Ijr rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - ?v=k-VA1e8rSJI Iajdpfx Asxabw Uoa Ior Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable Iodpfx Aetxkproa Isar -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Iedou Nigkepfx Aa Isar Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 69,430.00 69,430.00 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 RPM. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter. Including CPU 315 and Flexisoft, piece count multiplier for bundle cutting operations. Cycle time indicated in seconds, chain dimension, including reversing device for section lengths up to 4 m max. Automatic shut-off via limit switch at end of workpiece, error diagnostics, including IXON router for VPN connection, see datasheet. Motorized saw blade feed, continuously adjustable, vertical and horizontal clamping from below upwards, feed and discharge side at the saw head, cutting gap expansion on both sides of the saw blade. Electronic material feed unit, 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping device. The profile support area in the feed section is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile. Clamping pressure reduction horizontal and vertical with 6 pressure regulators, timed spray device with fill level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm, safety guard above the saw head and feed unit, 740 mm roller conveyor with reach-in protection on the infeed side, 450 mm Pertinax table plate with reach-in protection on the discharge side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which is detachable for easy emptying. 2 outlets with 100 mm hose adapters, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Iasdpfx Aaoy Dtpmo Ior Large filter surface, pneumatic shaker unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation controlled by the saw, without power cable, paint finish: RAL 7035 / 9016.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds Iaodpfsyyz Ebjx Aa Ier - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately Iasdpsyyzxhofx Aa Isr - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2001, Hydropneumatic operation Iajdpfjyu Rztjx Aa Ijr Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Iaodpfx Aeyu Rw Isa Ier Weight: approx. 450 kg

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm Iajdpfx Aajm Twgwe Ijr cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Isdpfx Aeyrrddea Ioar Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Isdpfxeyrrbvs Aa Ioar Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Iedpeynaluefx Aa Iear Abutment height: 150 mm Weight: approx. 400 kg

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades Iedpfoyu Hy Sjx Aa Iear --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg Iaedpfxox Avtvs Aa Isr

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm stroke 250 mm turning speeds 40 / 80 U/min capacity 90 degrees: square 75 mm total power requirement 1,0 / 1,4 kW weight of the machine ca. 250 kg dimensions of the machine ca. 600 x 700 x 1600 mm Features: Iajdpfxjvg R Rns Aa Ior - Coolant system - One-sided miter adjustment - Saw blade 275 x 2.5 x 40 mm - Machine base

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . Isdpfjyilm Rjx Aa Iear - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: used, saw blade diameter 275 mm cutting diameter bis 90 mm cutting range flat 120 x 75 mm turning speeds 40/80 U/min Iedpfx Ajwglgisa Isar miter cut 45°/90°/-45° ° weight of the machine ca. ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Iaedpfx Aaeq Awg Ee Ijr

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Iasdjvdk A Espfx Aa Isr Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 250 mm Cutter arbor diameter: 40 mm Milling width: 300 mm Milling depth: 85 mm Iasdpfxsygdf Ao Aa Ior Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: good (used), Year of construction: 2000, High-performance universal metal circular saw Circular saw - automatic Eisele PSU 450 CNC 2 Saw blade diameter 450 mm Cutting diameter 150 mm Miter cutting - all positions +/-45° Saw motor 3.6 kW Isdpfx Aaevxkc Is Ijar

Condition: excellent (used), Length: 2100 mm Iajdpjiraqijfx Aa Ior 7 rollers, width: 200 mm Rollers-Ø 40 mm

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm Iajdpfxstt Eb Se Aa Ior

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW Iasdpfx Aasy Dc I Ss Ier • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.