Used Eitec Gmbh for sale (67,817)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Njdpsx A U Ncjfx Aacewc Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Nsdpjvtpq Hsfx Aacjwc Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, The Laser Cube X is a compact and versatile laser robot cell designed for precise welding, cutting, and structuring processes. Equipped with a state-of-the-art laser source, high-performance robotics, and a secure safety enclosure, the cell is ideal for automated mass and small-batch production. Its modular design, high process stability, and short setup times enable efficient integration into existing production environments. Nwedoyhzrtjpfx Aacsc

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: Nwsdpfsxgqlhsx Aacec - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. Nwodpoyb I Azofx Aacsc ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Nwedpfxoyb Hu Ns Aacsc Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Glass GbmH mixer marinator for delicate food products, with manual tilting and multi-functional control display. Fitted on mobile frame. Suitable for semi-solid, powdery and liquid products. Model / Type - VSM 150. Serial number - 4174 Date of manufacture - 2019. Capacity - 150 litres. Electric supply - 400 V / 50 hz / 3 phase. Power - 16 Amps. Nwjdevuhiqopfx Aacsc

Condition: like new (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Nwodpfxjw Izrcj Aacsc Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 004, 2 Vacuum Pressdryers QUATTRO with Automatic Stacking and Remote Control. Lumber and Platens are combined transported 2 Vacuum Pressdryers SIGMA 9 QUATTRO with automatic stacking Lumber content 72 m³ (30 mbf) comparable to 210 m³ (90 mbf) vacuum dryers with fans or to 800 m³ (340 mbf) conventional dryers but more economical, without contamination of the atmosphere and with Super drying-quality! Nwjdpfx Ajv S U Tqoacoc

Year of construction: 1983, condition: ready for operation (used), Was used to rework profile rollers for a hot rolling mill, was regularly serviced, with accessories, without spare parts, on-site inspection is possible, no videos available. Nwsderiwfiepfx Aacoc

Year of construction: 2006, condition: ready for operation (used), Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. Nwedpsrn Ta Rsfx Aacjc

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Nedpfjuyk N Iox Aacowc

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Nwsdpfx Aaeuy T Nqjcsc

Year of construction: 2016, condition: ready for operation (used), Twelve identical assembly tables are available. Length: 2020mm, width: 82mm, height: 240mm. No defects known, one of the tables has a newer worktop, without documentation. An on-site inspection is possible. Nwodpfxjxcx A Hs Aacoc

Condition: ready for operation (used), Year of construction: 2000, Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power. Nwedsx Aum Uepfx Aacjc

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Njdpfx Aaorc Hiiocewc

Condition: ready for operation (used), A conventional center lathe is available. An on-site inspection is possible. Nwodpfjxcx Ayox Aacec

Condition: used, Year of construction: 1998, operating hours: 6,720 h, functionality: fully functional, machine/vehicle number: 22.303, planing height: 300 mm, planing width: 400 mm, rotational speed (max.): 5,800 rpm, height adjustment type: electric, compressed air connection: 7 bar, input voltage: 400 V, number of spindles: 12, power: 111.2 kW (151.19 HP), chip removal: 20 mm, input frequency: 50 Hz, input current: 327 A, For sale is a heavy-duty, industrial-grade four-sided planer Rex 410 complete with extensive HIT mechanization, designed for the efficient processing of structural timber, KVH/BSH products, and profile boards. The system is suitable for: • Pre-planing • Lamella planing • Final planing of KVH/BSH • Profile production • Continuous beam processing including turning and patching The machine features 12 spindle units including chamfering devices and is engineered for high material removal rates as well as large cross-sections. Sold ex-location (machine is not dismantled). Nwsdoyk E R Iopfx Aacec If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Nsdpfx Aajq Rd R Decswc Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Year of construction: 2026, condition: new, functionality: fully functional, construction height: 3,500 mm, operating pressure: 6 bar, construction width: 14,000 mm, laser power: 6,000 W, working length: 4,000 mm, workpiece diameter (max.): 1,200 mm, number of axes: 8, laser type: diode laser, laser source manufacturer: Laserline, number of tool turrets: 1, Machine Description The system offered is an adaptive, robot-assisted laser welding cell designed for high-precision machining of large-format metal components. The cell is based on a modular machine platform and is engineered for demanding industrial applications in both additive and subtractive laser processing. This system is specially designed for the processing of rotationally symmetrical workpieces as well as complex welding, repair, and build-up operations on large metal parts. By combining powerful robotics, intelligent control software, and integrated sensor technology, the cell enables reproducible, automated, and cost-effective production. System Configuration & Mechanics - Large-format, enclosed laser cell with safety housing - Robot-guided laser welding system with high payload and extended reach Nwodpfx Aoyhhudjacoc - Integrated rotary positioner for continuous 360° workpiece processing - Engineered for heavy workpieces (several tonnes in weight, depending on configuration) - Ergonomic loading and unloading via large access doors Laser & Process Equipment - High-performance laser welding head for precise welding and build-up applications - Supports additive processes (e.g., cladding, repair welding) - Optional combination with additional laser or plasma processes possible - Automated tool or process head changeover (configuration dependent) Adaptive Control & Software - Integrated CAD/CAM system for automatic generation of machining programs from 3D STEP files - Collision-monitored simulation of all robot movements and tool paths prior to processing - Offline programming with digital process validation - Automatic adjustment of process parameters during operation Sensor Technology & Process Monitoring - 3D seam tracking sensor for real-time path correction - Compensation for component tolerances and thermal expansion - Continuous process monitoring for high seam quality and repeatability Typical Application Areas - Laser welding of large steel and metal components - Additive repair and refurbishment of large parts - Cladding and build-up of functional surfaces - Manufacturing and post-processing of rotationally symmetrical components - Heavy industry, mechanical engineering, energy and turbine construction System Advantages - Fully automated machining instead of manual welding processes - High process reliability through simulation and sensor technology - Significantly reduced setup and commissioning times - High flexibility regarding variants and component geometries - Cost-effective alternative to replacement of large components

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis Nwodpfxstrf Smj Aacjc - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window Nwsdpfx Aaox Hg Ibococ • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Njdpfoydmhuex Aacswc Our qualified service technicians perform these tasks professionally and reliably. These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request Nedpfx Aofifbbeacjwc

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Nsdpofifa Aefx Aacowc Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request