Used Electra Beckum Hc 260 for sale (3,067)

Condition: used, Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Kodpfx Agsc S D A Tenelt Condition: Tested and ready for use Connection: 230V Delivery time: ex stock (u.ue.V.)

Condition: excellent (used), Year of construction: 2010, Clamping force: 260 t Screw diameter: 50 mm Ksdpfx Aoy Eytzegnelt Screw dia 2 : 35mm Type: Horizontal Drive: Hydraulic Robot Engel Conveyor cage

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes Kodpfx Agjig T Epsnslt x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: excellent (used), Year of construction: 1995, upon request Klsdpjfxgmgjfx Agnst

Condition: like new (used), Year of construction: 2016, Manufacturer: LVD Model: Electra FL3015 Serial number: 36445 Country of origin: Belgium Year of manufacture: 2016 Technical parameters: Laser type: Fiber laser Source power: 3 kW Working area: 3000 mm × 1500 mm Laser source: Rofin FL030 fiber laser source Source serial number: 987 Kjdpfjyhppvjx Agnjlt Source year: 2015 Additional equipment: Thermotec chiller – cooling unit for stabilizing the laser source temperature Donaldson Torit DCE DFPro-4SPK – extraction and filtration system for laser fumes Automatic loading/unloading table Light guard – light protection system

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t Kedpfeyn R Exsx Agnslt dimensions of the machine ca. 2,8 x 1 x 1,4 m With Multifix holder, chuck und chuck safety cover.

Year of construction: 1999, condition: excellent (used), Rovema VPI 260E vffs machine with powder auger filler. Klodeiwdgpjpfx Agnet Optionally with full new electronics.

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, diameter 300 mm and diameter 400 mm, and hydraulic clamping cylinder, type: Y-1550 RE. Sold individually or as a set! Kljdpfx Aoy Dcl Rsgnet

Condition: new, Year of construction: 2025, Beco Maxxim 260 • Cargo box 5,250x2,300x1,100 mm • Load capacity of 26,000 kg • Hydraulically forced steering on rear tandem axle • Oscillating tandem with air brakes • Manually foldable bumper • Hydraulically suspended drawbar in combination with ALR valve • Aluminium cover flaps • Equipped with 4 work lights • Tyres: BKT 710/50R30.5 • LED lighting all around • Step to cargo box • RDW certified for 40 km/h Condition: New Year of manufacture: 2025 Ksdpfx Asytdmmjgnolt

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg • Tool magazine capacity: 60 pockets Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Klodpfx Aoyr Sc Hognst Technical Specification Taper Size ISO 50

Condition: good (used), Horizon BQ-260 perfect binder size 32x32 cm 1 Clamp Ksdsy Rkvdspfx Agnolt Automatic Cover Feeder Hotmelt Glue Lateral side Glue

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 15,000 rpm, spindle motor power: 46,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine. • Swivel head (B-axis) • Rigid table: 3,200 x 1,100 mm (125.98 in x 43.30 in) • Rapid traverse (standard): 40 m/min (131.2 ft/min) • Acceleration (standard): 4 m/s² (13.12 ft/s²) • Tool clamping: DIN 69872 • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 9 s (SK40) • Direct measuring systems Klodpfx Aox D Iclognst • Full-protective cabin and coolant tank • S-A3070 Dynamic package for DMF 260 linear (Y 1,100 mm): • Linear drive X-axis with 80 m/min (262.48 ft/min) • Rapid traverse XYZ: 80/60/60 m/min (262.48/196.86/196.86 ft/min) • Acceleration XYZ: 5/6/6 m/s² (16.4/19.68/19.68 ft/s²) • Active chiller for main spindle and linear motor • Tool magazine: 30 tools (chain with double gripper) • Chip-to-chip time: 7.5 s (SK40) • Motor spindle speedMASTER SK40: • Torque: 200 Nm / 130 Nm (148 ft-lbs / 96 ft-lbs) • 40% / 100% duty cycle Additional equipment • Chip conveyor (scraper type) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,700 h, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, overall weight: 15,000 kg, total height: 2,250 mm, product length (max.): 11,000 mm, This 3-axis LVD Electra-FL 3015 was manufactured in 2015 and features a 4kW fiber laser by Rofin/Coherent. It includes automatic shuttle tables, a cutting head with lens systems, and automatic functions for nozzle cleaning, height calibration, and gas selection. The machine supports a maximum sheet size of 3050 x 1525 mm and offers high-speed positioning. If you are looking to get high-quality cutting capabilities, consider the LVD Electra-FL 3015 machine we have for sale. Contact us for more information. • Production Hours: • Machine: 15700 hours • Lasersource Laser On Time: 9980 hours • Type: Sinumerik 840Dsl / B&R APC 910 • Operating System: Windows® 7 Embedded Klodpjx D En Esfx Agnjt • Memory Capacity: 4GB RAM / 60GB SSD • Screen: 19” LCD Touch Screen • Network Card: 1Gbit/sec RJ45 Connection • USB Interface: 2 x USB 3.0 on Front Panel • Max. Positioning Speed X-Y: 170 m/min • Max. Positioning Speed Z: 30 m/min • Smallest Programmable Increment: 0.01 mm • Positioning Accuracy: 0.05 mm • Repeatability Accuracy: 0.025 mm • Maximum Sheet Size: 3050 x 1525 mm • Maximum Sheet Weight: 700 kg • Automatic Shuttle Tables • Cutting Head with 5” or 7.5” Lens System • Automatic Nozzle Cleaning and Height Calibration • NC-Focus, Automatic Focal Point Adjustment • Cutting Head with Crash-Protection System • Capacitive Height Sensing • Automatic Cutting-Gas Selection: Oxygen, Nitrogen, Air • Automatic Gas Pressure Control with Servo Valve • Automatic Sheet-Referencing (Laser Eye, Capacitive System) • High Pressure Nitrogen Cutting • TPC Total Power Control, Adapting the Laser Power Relative to the Speed • Chiller & Extraction Filter Included • Light Guards Protecting the Area Around the Shuttle Tables • 19” Touch Screen with New User-Friendly Touch®-L Interface • Automatic Start-Up / Shut Down • Tele-Service Available • Built According to the European Safety Regulations Provided with CE-Mark • Automation Ready Dimensions Machine Depth 4895 mm

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours. Kjdpoyi Eqxefx Agnjlt

Condition: used, Year of construction: 1999, capacity 90 degrees: round 260 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 400 x 260 mm 250 mm 240 x 240 mm 240 x 260 mm 250 mm 250 x 250 mm 290 x 250 mm capacity 60 degrees: round 160 mm capacity 60 degrees: square 160 x 160 mm Ksdpfoyv Npmex Agnjlt capacity 60 degrees: flat 110 x 260 mm 190 mm 190 x 190 mm 210 x 190 mm dimensions of the machine ca. 1700x2000x1600 mm weight of the machine ca. 960 kg

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery Kledswdgfzjpfx Agnst - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, cutting diameter 260 mm band length 450 x 40 x 2 mm capacity 60 degrees: square 240 mm 260 x 180 total power requirement 2,0/2,6 kW Kledsyt R Ikjpfx Agnet weight of the machine ca. 1,4 t dimensions 2,1 x 1,7 x 1,0 m

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Klodpfxswtd A Nj Agnet Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2013, axle configuration: 4x4, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 15.950 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.560 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1610 m Transport dimensions (LxWxH): 12,01x2,38x2,71 Production country: FR Additional information Please contact Christian Theißen for more information Kledpjv Tiqmjfx Agnjt Manufacturer: Haulotte Model: HA260PX Year of build: 2013 Condition: Used Data: Max. working height: 25,60 m Platform height: 23,60 m Max. reach: 16,10 m Platform lifting capacity: 230kg Platform dimensions LxW: 1,80 x 0,74 m Swivel range: 360° Max. climbing capacity: 40% Total dimensions LxWxH: 12,01 x 2,38 x 2,71 m Movable up to working height: 25,60 m Wheel pressure max.: 64,5 kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 15.950 kg Special features: Rotating work basket, basket arm/vertical rotation angle 140°, all-wheel drive, differential lock, permanently installed soot filter. Location: 41468 Neuss immediately available

Condition: used, functionality: fully functional, Engine lathe, manufacturer WEILER Technical data: Distance between centers approx. 500 mm Center height above bed: 125 mm Infinitely variable spindle speeds: Range 1: from 160 – 900 rpm Kodpfxoyzrnpe Agnslt Range 2: from 320 – 1800 rpm

Condition: new, Year of construction: 2026, Belt width: 200 mm Belt length: 2600 mm Ksdpfx Aeyvz Riognelt Oscillation: yes Sanding rollers for contours: 1 Tilting sanding unit: yes Table size: 930 mm x 300 mm Extraction connection: 140 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 280 kg

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Kledpou Hv Szsfx Agnst

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Klodpfoyzggaex Agnst Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Two pneumatic reject arms Fully stainless steel Kjdpeucgalefx Agnolt Belt dimensions 1750mm x 195mm In good working condition

Condition: used, mileage: 371,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine producing 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible gross vehicle weight of 26,000 kg. The yellow (metallic) vehicle is equipped with a green emissions sticker (class 4) and comes with practical features such as a steering axle, reversing camera, and integrated air conditioning. It offers seating for two persons and has two doors. The truck has previously had one owner and is in used condition. Klodpfxswzzkyj Agnet In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Sale exclusively to traders (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.