Used Electric Metal Shears for sale (61,267)

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms Lhodpfx Aajuagxpezel - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears Ljdjv I Sxvepfx Aazshl - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Lodpfx Asy Nycqoazehl Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Adjustable cutting angle

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Lhedezg Dp Topfx Aazsl Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min Ledpfxsxab Ruo Aazshl cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Lodpfxjcv R Dko Aazjhl Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. We look forward to hearing from you! -> We issue invoices

Condition: used, Year of construction: 1994, total length: 4,100 mm, total width: 1,900 mm, total height: 1,750 mm, Colour: Blue Weight: 6.500 kg - Year: 1994 Lhsdpfxjy Nk R Se Aazel - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 10.769/94 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 16.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3150 - Throat depth [mm]: 160 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 4100mm x 1900mm x 1750mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2021, operating hours: 4,300 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, output current: 800 A, control voltage: 400 V, type of output current: three-phase, Main incomer switchboard 12-Way 800A TP Panel Board Used but still in new condition We brought from Schneider but it was not suitable for our usage. Lhedpfxsrmngao Aazel

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a Lsdpjvg R Rzjfx Aazehl material strength of 450 N / mm². Electric 380 volt

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Lhedpfexg Ekfsx Aazol

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Ledpfx Aaextpwvszohl Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Adjustable cutting angle

Condition: good (used), functionality: fully functional, Year of construction: 2006, working length: 3,080 mm, Adira GHS 0630 sheet metal shears Fully functional. Platform sheet metal support Elgo positioning controller Ljdjwf U Tcepfx Aazshl

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Type VS 430 3 Capacity: 4300 x 3 mm Lhodpfeyzgdrox Aazel Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Equipped with lift/discharge device at the rear

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter Lhjdpfx Aasxabllszjl - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Condition: used, functionality: unexamined, machine/vehicle number: 10091, Sheet metal shear Eclair ASS 3.5 Delivery terms: Free on truck Location: 74906 Bad Rappenau Collection: Collection of the machine is scheduled for October 7, 2026, and the date is binding. The exact collection time will be arranged with us in advance. Payment terms: Payment in advance – by bank transfer Technical data: Max. cutting length: 2,550 mm Max. sheet thickness: 3.5 mm Strip width min.: 25 mm Strip width max.: 700 mm Upper blade: 2,550 x 52 mm Lower blade: 2,550 x 70 mm Clamping bars: 15 pieces (hydraulic) Scope of supply: Existing manuals as shown in the pictures Existing accessories as shown in the pictures Dimensions & Weights: Installation dimensions L x W x H approx.: 2900 x 2420 x 1600 mm Weight approx.: 2000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. Lodpfjzx S Diox Aazjhl ❗The sale of the goods is exclusively to business customers❗

Condition: used, functionality: fully functional, Year of construction: 2005, control type: manual, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, overall weight: 13,200 kg, Equipment: emergency stop, finger protection, type plate available, - Model: CM 4005 - Year of manufacture: 2005 - Condition: used - Technical data: Weight 13,200 kg, Cutting length 4,050 mm, Lhsdpfxezik E Tj Aazol Blade length 4,200 mm, Working area 4,200 mm, Material thickness: Steel 5.0 mm, Aluminum 6.0 mm, Stainless steel 3.0 mm - Advantages: - High precision and reliability - User-friendly operation - Low maintenance and durable We offer a Colgar CM 4005 mechanical plate shear from 2005 for sale. The machine is designed for precise cuts with a cutting length of 4,050 mm and a blade length of 4,200 mm, and it allows for a working area of up to 4,200 mm. With a weight of approximately 13,200 kg, the shear is characterized by its robust industrial design. The Colgar CM 4005 is suitable for cutting various materials, including steel up to 5.0 mm thick, aluminum up to 6.0 mm thick, and stainless steel up to 3.0 mm thick. Several yellow clamping fingers along the cutting edge secure the material during operation. The front of the machine features a metal table with attached metal bars. The user-friendly control panel is equipped with a digital display and several colored buttons, including an emergency stop switch. Currently, "MANUAL 9.18" is displayed, which indicates the manual operating mode. The shear is painted blue and clearly displays the COLGAR logo. Signs of use, such as paint chips and superficial dirt, are present and correspond to the usual condition. These do not appear to affect the structural components but should be considered when assessing the machine. Overall, the Colgar CM 4005 mechanical plate shear offers high precision and reliability in a robust design that is suitable for a variety of metalworking applications. It is a low-maintenance machine for industrial use that combines a solid construction with practical features to increase operational efficiency. The following description is for guidance only and may not reflect all specifications or conditions. Please contact us if you require accurate or confirmed details. “The machine is sold in accordance with Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport and customs formalities.”

Condition: good (used), You are bidding on: a branded machine set – a folding machine from a renowned and well-known manufacturer – Schechtl HA and a guillotine shear RAS by Reinhard Maschinenbau Sindelfingen. Machine details: Folding machine: - Die rail bends cleanly – test possible on site - Angle display - Bending length slightly over 2.5m - Sheet metal capacity: 1.5 mm for steel – also suitable for aluminium, zinc, etc. - Standard die rail - Foot-operated closure - Current new price approx. €20,000 net Guillotine shear RAS: - Electrically operated guillotine shear up to 2mm steel – also suitable for aluminium, etc. - Cutting length: 2.5m - Extension table for special applications included in the price – can be mounted on the left side - Optional spare blades available - Adjustable depth gauge from the front - Many additional onsite tools and auxiliaries available as options - Machines can also be purchased individually Important: Optionally, you will also find a wide range of machines and equipment for sheet metal and steel processing on offer in our shop, including various rails, depth gauges – everything relating to bending and shearing, such as press brakes, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, round rollers for gutter fabrication, back gauges, etc.), as well as hand tools and spare parts from many top manufacturers in stock. Please feel free to contact me for any questions. You will receive an invoice in accordance with § 25a UstG, VAT is included in the invoice amount (margin taxation system). Free loading available – approx. weight: bending machine about 1900 kg, shear about 1600 kg. Inspection and testing are possible and encouraged by prior phone appointment. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Lhedpfxsyqytqs Aazol Article number: Folding machine RAS 251009

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Ledpfx Aaow U Sryezshl Location: 97261 Güntersleben Item number: 250801

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Ledpfx Aaovkbrqszjhl Current: 35 A Note: The control panel display is not functioning.

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Lhsdjz A Amgopfx Aazjl Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 1990, Promecam GH840Z Shear, 4100 mm blade, cutting capacity 8 mm / 12 mm. In working condition and well-maintained, with sheet metal support. Lodpfjyy Dg Usx Aazehl

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm Lhsdpfx Aexab Tvjazol 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,300 mm, total width: 1,800 mm, total height: 2,700 mm, overall weight: 11,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 200 mm, spindle motor power: 15,000 W, product height (max.): 480 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC PRESS BRAKE MTP 200×3200 | 200 T | MTP-3212 | 4 AXES Y1, Y2, X + V The brand-new MTP 200×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 8 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications Lhedpfx Aaozg Hzxszsl • Maximum sheet thickness: up to 8 mm • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 15 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3300 × 1800 × 2700 mm • Machine weight: 11,400 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: good (used), Thalmann Pico Lhodpjzyzz Tefx Aazol 1mm steel - 1.75mm aluminum The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. The machine is privately owned and is being offered here as a friendly service (facilitated sale). Private sale – near Heilbronn.

Condition: good (used), sheet thickness steel (max.): 16 mm, overall weight: 16,500 kg, cutting length (max.): 3,000 mm, Used high quality Pearson hydraulic 3metre x 16mm guillotine for sale Lhodpfxjva Hq Rj Aazjl 3metre x 16mm Blade adjustment Front operated powered back gauge