Used Elumatec Mgs 72 for sale (103)

Condition: used, Year of construction: 2007, Technical data: Podpfxsrwlwvo Afhsgg Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Psdpfxouiy Ngj Afhsgg Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 26045, saw blade diameter: 420 mm, It performs cuts with double angle. It is supplied complete with input roller conveyor and output roller conveyor equipped with measurement reader. Pgedpfx Asv Hfc Eefhog

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Psdpsycul Sofx Afhsgg Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Milling cutter diameter: max. 100 mm Slitting cutter diameter: max. 100 mm Saw blade diameter: max. 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, slotting, and sawing with stationary profile bar 6-sided machining: optional from the front, possible from below Profile bar protection: machining with stationary profile bar Robust and low-wear direct drives on all axes Axes: 5-axis control for spatial machining Display: 15-inch color screen Interfaces: USB ports, network connection 2-layer machining for pendulum operation Included tools (HSK holders) Two circular saws for aluminum

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale used Elumatec machining centre CNC aluminium profile machining centre Pgjdswwau Nspfx Afheg 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router

Year of construction: 2004, condition: excellent (used), functionality: fully functional, 2004 Elumatec AKS 134 Notching Saw – High-Precision Notching for Curtain Walls, Skylights & Conservatories Manufacturer: Elumatec Model: AKS 134 Year: 2004 Condition: Very Good Now available: Elumatec AKS 134 Notching Saw, manufactured in 2004 and in very good condition. This robust, German-engineered machine is purpose-built for precise notching in aluminium profiles, specifically designed for fabricators working on curtain walls, conservatories, skylights, and other complex architectural aluminium systems. The AKS 134 features a dual-saw unit design — vertical and horizontal — offering exceptional flexibility, accurate angles, and safe operation. Combined with digital angle displays, hydro-pneumatic feed, and automated cutting cycles, this is a premium choice for serious aluminium fabricators. 🛠️ Key Technical Specifications: 🔻 Lower Vertical Saw Unit: Saw Blade Diameter: 550 mm Tilting Range: +45° forward to -60° rear Max Cutting Height: 210 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Manual Tilt Adjustment with Digital Display 400V, 3~, 50Hz 🔺 Upper Horizontal Saw Unit: Saw Blade Diameter: 500 mm Tilting Range: +55° down to -60° up Max Notching Depth: 190 mm Motor Power: 3 kW (with motor brake) Speed: 2,800 rpm Travel Distance: up to 830 mm Manual Tilt Adjustment with Digital Display Pgodpfx Afjxyupkjhjg 400V, 3~, 50Hz ⚙️ Machine Features: Dual saw blades for versatile and complex notching Workpiece stays fixed – only the saw units move, enhancing precision Simultaneous vertical saw unit height adjustment via handwheel (with analogue readout) Digital angle displays for both saws and pivoting back fence Manually adjustable support table Horizontal and vertical pneumatic clamping Automatic cutting cycle at 90° with two-hand safety control for angled cuts Hydro-pneumatic saw feed for smooth, consistent cutting Compressed Air Supply: 7 Bar (35–45L per cycle) 📏 Machine Dimensions & Weight: Footprint: 3000 × 1420 × 1600 mm Weight: 1,250 kg 🏗️ Ideal For: Aluminium façade and curtain wall manufacturers Skylight and conservatory fabricators Precision aluminium notching applications Workshop environments needing multi-angle notching in high volumes 🧰 Reliable, accurate, and engineered for demanding tasks, the Elumatec AKS 134 is a proven performer in the architectural aluminium industry. Elumatec AKS 134 for sale Aluminium notching saw Ireland Curtain wall notching machine Elumatec saw for curtain wall systems Notching saw for aluminium profiles Elumatec AKS 134 specifications 550mm notching saw Double blade notching saw Used Elumatec machinery Aluminium construction saw

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pgjdpjx E Ahzofx Afheg Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: ready for operation (used), Year of construction: 2013, This Elumatec DG 244 was manufactured in 2013. It features a 4.5m double mitre saw, pneumatic clamping device, dust extraction, and a profile lifting bar set. Suitable for both stationary and mobile units, it also includes a cycling device and front light curtain. Contact us for more information. • Working length: 4.5 m Additional equipment • Short Stop • Pneumatic Clamping Device • Dust Extraction • Profile Lifting Bar Set for stationary and mobile units Podpfx Afeycuquohogg • Cycling Device • Front Light Curtain

Year of construction: 2002, condition: used, Max. profile width at 180°: 220 mm Max. Profilhöhe: 210 mm Pgodpfjyab D Nsx Afhsg Adjustment range of angle: 30°-180° Welding mirror: 340 x 300 mm

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Pgjdsyabzuopfx Afhsg Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: used, Year of construction: 1999, x-axis 6450 mm y-axis 400 mm z-axis 380 mm working lenght 6500 mm Number of tools 8 St. tool taper BT30 tool changing time 1,2 sec diameter of tools max. 80 mm turning speeds 6000 U/min Feed speed X = 34 m/min. Psdpfx Aot H Sn Rofhegg Feed speed Y+Z = 18 m/min. total power requirement 8,5 kW dimensions 9800 x 3000 x 2400/3300 mm weight 5400 kg *Bar machining center, 3-axis machining of aluminum, plastic, steel and stainless steel profiles*

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: Machinenummer 1510052425, elumatec SBZ 151 5-axis machining center with a length of 7.3 meters. - 5-axis CNC profile machining center - Designed for flexible and efficient processing of aluminium profiles and thin-walled steel profiles - Rapid positioning of the machining unit - 6-sided machining capability, including bottom-side machining with angle head - Traveling tool magazines ensure short tool change times Pgodpfxex Tg S He Afheg - Magazine with 13 standard tools and seven special tools - Autonomous clamp adjustment with absolute measurement system - Two separate machining zones for pendulum (alternate) operation - 5-axis CNC control for optimal machining capabilities and complex cutting operations - Network connection and USB interface - Supplied with Windows operating system and 15” flat screen monitor Machine options: - 2 zero reference points - 10 material clamps - 21 kW spindle - 2 angle heads for machining the underside of the profile - 12 various tool holders - Remote control for all axes - Label printer

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine -Manufacturer: Elu, copy milling machine type AS 70 -Travel path: manual X//Y 230/80 mm Pgodpfxsp Swvks Afhog -Stop depths: see photos -Workpiece clamping: pneumatic -Coolant device -Dimensions: 600/520/H1280 mm -Weight: 111 kg with pallet

Condition: used, Year of construction: 1997, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine, single spindle copy milling machine Psdpfx Afstvhr Sjhogg -Manufacturer: elumatec, 1-SPINDLE COPY MILLING MACHINE Type AS 70/44 -Spindle speed: 12000 rpm -Stop depths: see photos -Workpiece clamping: pneumatic -Dimensions: Milling machine 580/500/H1510 mm roller blocks 1050/210/H900 mm -Weight: 149 kg with pallet

Condition: used, Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm Pgedpeinwuqjfx Afhsg -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm Pgodpfxettnt Io Afhsg -Weight: 9.5 kg

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm, electro-motorized movement of the right unit, digital measurement display, saw units swiveling and tiltable. Storage location: customer Pgjdpfsw Sadrjx Afheg

Year of construction: 2008, condition: good (used), 4-axis workingcenter Pgodpex Syx Defx Afhjg

Condition: ready for operation (used), functionality: fully functional, For sale: Complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers Available for sale is a fully coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for timber-aluminium windows - Renovation aluminium frames - Fixed insect screen frames The equipment is suitable both for existing companies looking to increase their manufacturing depth as well as for start-ups or newcomers wanting to take over a ready-to-use production line immediately. Special features: - Preferred sale as a complete package - Partial sale of individual machines possible - Field-proven, functionally matched machines - Independent in-house production possible - Significant cost savings compared to purchasing new equipment Instruction, training & knowledge transfer: Upon request, I offer buyers personal instruction and job training. The goal is to pass on the specialist knowledge built up over decades. The training can include: - Introduction to the complete production process - Optimal machine settings - Cost-effective production - Avoidance of common mistakes - Assistance with commissioning Benefits for the buyer: - Immediate start of production - Reduced dependence on suppliers - Expansion of offering portfolio - High value creation - Know-how transfer included Reason for sale: The sale is due to age and a change of profession. Further information: - List of machines and details available on request - Scope of training negotiable - Collection by arrangement If interested, please get in touch. Open to all options and arrangements. Double mitre saw Elumatec DG 79: Comes with blades for aluminium cutting. Year of construction 1996. Cutting length 4.5m. Digital length display. Overhauled in 2024 for 6,500. New feed units, belts and bearings. Fully operational. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Cut-off and mitre saw Graule ZS 170N: With 420 mm saw blades for aluminium cutting. Fully equipped. Year of construction 2004. Saw height 170 mm. Left roller track 6 m with manual stop. Right roller track 5.2 m with digitally adjustable stop from the saw stand, adjustable and swivelling! Pneumatic material clamping and mist spray unit. The machine can be tilted on both sides via handwheel. Compound cuts no problem! Digital electronic angle display for both axes. Laser guide on saw blade. Cross fence for acute angle cuts. With machine stand. Please note: The blue tool drawer cabinet and wall-mounted extraction system are not included in the offer. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Notching mill Graule AKF1: With 8 mm high-performance cutter for aluminium. I have used this machine to notch aluminium profiles. It also works equally well on wood or plastic profiles. With machine stand made of aluminium profile system. Manual workpiece clamping. Set up and ready for demonstration. Machine available due to business closure at the end of March. Pgedpsx Nbnhjfx Afheg

Condition: good (used), Year of construction: 2004, Large milling area despite compact construction Copy milling machines with lateral stops or a template in 1:1 ratio Two-stage pneumatic copying finger for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Pgedpfx Aox Rixkofhsg Table height adjustment for extremely high profiles up to 400 mm Simple tool change with "Spindle lock" Pneumatic material clamping device Spray device with dosing

Year of construction: 2004, condition: good (used), Machine frame DG 104 M made of steel sheet (cutting length 6,000 mm) Profiled lifting bars Movable or automatically retractable workpiece supports Material clamping units Cross stop and head stop Exhaust connections, extraction system Timer system Roller conveyors Saw blades High-performance cutting fluid Pjdpfxjx Rinro Afhogg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range Pgodpfxoyfhvps Afhjg The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Year of construction: 1996, condition: used, Max. saw blade diameter: 280 mm Pneumatic material feed via two-hand operation Podpox Ivqzefx Afhsgg minimum quantity spraying Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request

Condition: used, Year of construction: 2003, Simultaneous processing of external contours as well as the weld seams on the top and bottom Two milling slots for freely configurable milling sets With sprung nut blade optimal groove pattern for convex and concave profile surfaces Adjustable feed-in also pulls heavy and tall profile elements (e.g. front doors) precisely and safely No twisting of the profiles due to horizontal and vertical clamping Podpfx Asx If Szefhjgg Milling cutter diameter up to 260 mm for profiles with extreme build depth possible Series purge device, thus no inaccuracies due to securing chips Versatile through individually switchable slot cutters and milling cutters as well as individual and quickly exchangeable cutter combinations Outer dimension min. frame size 290 x 290 mm Inner dimension min. frame size 160 x 160 mm Profile height max. 200 mm Profile height min. 25 mm End mill diameter max. 260 mm Milling spindle speed 3,200 1/min

Condition: used, Year of construction: 2002, The handle olive drilling unit with three-spindle drilling head and automatic feed allows operations in 2 levels without material tension. The unit is height-adjustable. Speed: 12,000 revolutions per minute Pneumatic material clamping Minimum quantity spray device Milling area horizontal to stop: 300 x 120 mm Pgedpfex If Ayex Afhjg Clamp range of profiles with drilling unit stroke 150 x 110 mm up to 400 mm adjustable Hub: 105 mm Weight: approx. 200 kg