Used Elumatec Mgs 73 for sale (146)

Year of construction: 2008, condition: good (used), machine/vehicle number: 0733337043, Offer 26310 Technical data: - Saw blade diameter 380 mm - Miter adjustment 45° - 90° - 45° - Automatic saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 3 kW Iijdpfxjz Iyz Eo Am Djh - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1500 x D 900 mm - Weight approx. 300 kg - Outfeed roller conveyor with stop, adjustable via handwheel + digital display 3000 mm - Infeed roller conveyor 6000 mm

Condition: used, Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,550 mm, saw blade speed: 2,800 rpm, overall weight: 280 kg, For sale is an elumatec SA 73/35 sawing machine, manufactured in June 2006. Iiodpfxez D Ahmj Am Deh The machine is suitable for the automatic cutting of aluminum.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Iijdpfx Aezupzqom Dsh Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Ijdpfx Amoynacyo Doih Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Weight: approx. 1,000 kg

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Roller beds and length stops on request Iisdpfezf Agzex Am Dsh Weight: approx. 1,000 kg

Year of construction: 1996, condition: excellent (used), functionality: fully functional, ELUMATEC MGS 72/30 – Miter saw Technical data: Saw blade diameter: 380 mm Motor power: 3.0 kW Speed: 2,800 rpm Power supply: 230/400 V, 3 ~, 50 Hz Swivel range: 0–45° to the left and right Iedpfx Amjz Dpv Dj Dsih Angle adjustment: stepless Locking positions at 15°, 30° and 45° Saw blade feed: manual Dimensions (L × W × H): approx. 780 × 900 × 815 mm Weight: approx. 120 kg Robust and precise miter saw for cutting aluminum and plastic profiles. Stable machine table with a precisely mounted rotating table. Ideal for use in window, door, and aluminum profile construction.

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Iiodpfx Amoy Uyfpo Deh

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Isdpfjz Nivvjx Am Doih Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Documentation available Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Iijdpeuiy Ngjfx Am Djh Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen Iiedpoz Eqpnjfx Am Deh - Barcodescanner - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below Iisdpfxez S Nays Am Deh Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 4,500 mm, overall weight: 1,500 kg, Fully refurbished Elumatec DG 142 twin-head saw with E550. New blades have been installed, and all bearings and wear parts have been replaced. All pneumatic hoses and pneumatic system components have been replaced. The machine comes with a fixed dust extraction unit, 1.5-meter rollers on the moving head, and a sliding profile holder. Additional options for the machine include: a short-measure stop, a printer, adjustable mitre angles from 45 to 90 degrees, and E111 on both heads. Iiodpfxsz Smc Te Am Doh

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, CNC-profielbewerkingsmachine met 4 assen: - Bouwjaar 2013 - Draaiuren: 6.044 uur - Bewerkingslengte: 7,6 m - Gereedschapsset Iiodpfx Asz Eqxcem Dsh De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine komt beschikbaar begin decemeber 2026.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. Iiodpfxoziy Ido Am Djh All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Iiedpfx Amoz Rpgwe Djh Dust extraction system: Year of manufacture: 2008 For sale only to dealers and commercial businesses. Due to the age and operating hours, no guarantee or warranty is provided.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2440099152, Elumatec DG 244 Twee-kopszaagmachine - Bouwjaar 2012 - In goed werkende staat De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Iijdpfx Aez Eqygom Dsh Machine is beschikbaar begin december 2026.

Condition: used, Year of construction: 2015, operating hours: 19,517 h, functionality: fully functional, machine/vehicle number: 1220099199, Elumatec SBZ 122/64 CNC machining centre for aluminium and PVC profiles. Made in Germany, 12/2015. Fully functional, currently in production. Inspection under power on site or via live video. Spindle: 22,000 rpm Power: 21 kW, 400 V, 50/60 Hz Air: 7 bar Machine hours: approx. 19,500 h Iedpfxsz Ruzgj Am Doih Spindle hours: approx. 4,390 h Pneumatic clamps, safety light barriers

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1425131305, Dvigalvės pjovimo staklės. Isdpszdpz Nefx Am Doih Viskas veikia.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Iodpfezy Staex Am Doih Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg The machine is in perfect working order We can ship the machine to your address (On demand)

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 1510051228, Fully functional CNC machine from 2010. Viewing is possible to see the machine in operation. The buyer is fully responsible for dismantling and transporting the machine to their location. More information: 5-axis profile machining center Iodpfx Aoz Aki Esm Djih Designed for flexible and efficient aluminum machining Autonomous clamping positioning Maximum working length: 7000 mm; 12 pneumatic clamps, also operable via a 2-station setup (2 x 3500 mm) Tool magazine with capacity for 20 tools, a 500 mm saw blade, and an angle head.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 1510051180, Fully functional CNC machine from 2008. Viewing is possible to see the machine in operation. The buyer is entirely responsible for dismantling and transporting the machine to their location. More information: 5-axis profiling machining center Iiedpfx Amjz Akh Uj Djh Designed for flexible and efficient aluminum machining Autonomous clamping positioning Maximum working length: 2 stations of 7000 mm; 10 pneumatic clamps per workstation Tool magazine with a capacity for 20 tools, a 500 mm saw blade, and an angle head.

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides - 2 additional, automatically positionable material clamps - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled - 2-layer machining - Minimum quantity lubrication - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Iisdszz Tbhopfx Am Deh Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1045331039, Elumatec DG 104 Twee-kopszaagmachine - bouwjaar 2006 - in goed werkende staat Iodoz Eqxvopfx Am Djih De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine beschikbaar begin december 2026.

Year of construction: 2007, condition: used, functionality: fully functional, Complete set of machines for the production of PVC joinery – sold ONLY AS A WHOLE. The set includes the following machines: - CLEANING MACHINE Elumatec EV 834/01 (8340120611 - 11/2007) - MILLING MACHINE Elumatec GF 171/00 (1710821408 - 08/2008) - MACHINE FOR CUTTING GLASS HOLDERS PERTICI BS771 (05V150 - 2005) - WELDING MACHINE Elumatec ZS 720/00 (7200020800 - 12/2004) All machines are in good condition and fully functional. An industrial vacuum cleaner for PVC chips is also included as a bonus with these machines. Iisdpfjzxdf Ejx Am Dsh

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing Ijdpfx Amszxc Rmj Djih The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation