Used Encoder for sale (731)

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Knsdpexxidaofx Anxeb Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: ready for operation (used), Siemens 1FT6086-8SH71-1EH0 synchronous servo motor SN: YFC836931401001 with encoder and brake, used, minor signs of wear, 100% functional, scope of delivery as per photos Kedpfxew R Iyro Anxonb

Condition: ready for operation (used), Siemens 1FT6084-8WF71-3DH1 synchronous servomotor SN: YFX114744801003 – Encoder IC22DQ B20 / Brake 24VDC 22.3W 3014404 – water-cooled, professionally fully overhauled and tested with 12 months warranty, 100% operational, scope of delivery as per photos. Agreed sales discounts do not apply to this item. Please inquire for price separately! Knsdpfex Duraex Anxob

Condition: ready for operation (used), Year of construction: 2009, total height: 2,370 mm, overall weight: 2,500 kg, product length (max.): 2,850 mm, This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 50W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information. Kjdpfx Aoya Ah Asnxsnb • Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m • Weight with X-Y table: approx. 2,500 kg • Machine power consumption (with laser and cooling unit): 16 kVA • Fuse: 40 A at 400 V • Operating voltage: 3/N/PE/400 V/230 V 50 Hz • Maximum permissible deviation: ±10% • Control voltage: 24 V DC • Permissible ambient temperature: +15°C to +35°C • Permissible relative humidity: max. 75% at 20°C • Travel range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transverse), Z = 500 mm (vertical) • Table size: 400 x 300 mm • Feed drive: Digitally controlled AC motor and ball screw in each linear axis • Maximum feed rate: X/Y: 15 m/min; Z: 12 m/min • Guides: Ball screw guides in all linear axes • Measuring systems: X, Y, Z indirect linear encoder • Machine accuracy: P = 0.010 mm (VDI/DGQ 3441) • Laser type: Picosecond laser • Average laser power: 50 W • Wavelength: 1064 nm • Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm • Lubrication: Manual central lubrication • Electrical control cabinet: with cooling unit (integrated into the machine) • Cabin: Fully enclosed cabin including roof; laser safety screen (optionally multiple); optimal operator access

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm Kjdpfogccucsx Anxonb -Weight: 4.3 kg

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±8 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O Ksdpfx Aneuxfupjxenb -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Condition: used, Year of construction: 2019, Used Linear Labeler PackLab Knjdpfx Anovgutgexjb Used Linear Labeler, built in 2019. Very little used therefore kept in excellent condition. Non-stop function with two groups of wrapping labels. Flexible self-adhesive linear labeler for wrapping label application, front and back. Suitable for applying partial or wrap-around body labels on cylindrical containers and partial front and back labels on shaped containers Speed of production: Achieves a production of 220 jars per minute, therefore 13200 jars per hour. Labeler Non-Stop PackLab 2019 base with external labeling stations to give the operator more accessibility both during the work phases and during the format change. N. 2 labeling stations for each label to be applied with automatic interchange in the presence of an end of the reel, breaking of backing paper, and lack of a label on the reel. PLC and other: PLC type is Schneider with a 5-inch touch screen. The wrapping belts of the Used Linear Labeler are motorized with speed regulation and with an encoder connected to the machine’s speed. While the upper ribbons are motorized and with stabilizers to keep the container straight. There are inlet and outlet overflow sensors for flow regulation. Adhesive group of the Used Linear Labeler recipe adjustment keyboards with storage of up to 500 formats. This machine is complete with all safety protections according to CE regulations. All the machine user manuals are also available. The original copy of the use and maintenance of the machine is also released.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ksdpfxovvi N Io Anxonb

Condition: good (used), Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 .: 295 434 GK Kedpfx Aevrdpzenxonb -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

Condition: not inspected (used), Mitutoyo Quick Scope QS250Z1J Measuring range (X×Y×Z): 200×250×100mm Resolution / length standard: 0.5μm / linear encoder Image transmission unit: 1/3" color CCD camera Measuring accuracy: XY: (2.5 + 6L/1000) μm Z: (5 + 6L/1000) μm Moving speed (max): 80mm/s Acceleration/deceleration (max): 250mm/s² Glass size: 269 × 311 mm Maximum load capacity: 10kg Illumination: Contour illumination: 12V/30W halogen Reflective illumination: 12V/50W halogen Fiber optic ring illumination: 12V/100W halogen Kjdpfx Anezb U Anoxonb Main dimensions (W×D×H): 465 × 815 × 663mm Weight: 76 kg (169 lbs) Maximum power consumption: 970W Optical system 0.5X–3.5X (20X–137X monitor magnification), 8 steps, 7X zoom. Required operating software Mitutoyo Quick Scope QS250Z1J is the default operating and measuring software for QSPAK

Condition: new, Mitsubishi HC202BS SN 4786002 + Encoder OSA104S SN J4AVU3R1T1J, unused with signs of storage, 100% functional, scope of delivery as per photos Kodjqztumspfx Anxonb

Condition: like new (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 310 mm, measuring range Z-axis: 820 mm, total width: 1,850 mm, total length: 1,030 mm, total height: 2,150 mm, overall weight: 500 kg, Equipment: documentation/manual, type plate available, ZOLLER Venturion 450 tool presetting machine. The ZOLLER »Venturion 450« tool presetting machine sets new standards in modern machining. Thanks to its maximum level of automation, you can measure and preset your tools completely independently of the operator – for reproducible top quality and highly efficient processes in your workshop. • Manufacturer: ZOLLER • Model: VENTURION 450 • Year of manufacture: 2018 • Condition: very good, fully functional • Location: Graz • Images/Videos: Images and videos will be provided upon request. _____ Your advantages at a glance: • Operator-independent precision: Fully automatic measurement sequences guarantee exact results – regardless of who operates the machine. • High-end automation: CNC axes, automatic focus and a precise rotary encoder take the work out of your hands. • Tool clamping in perfection: The high-precision »ace« spindle clamps any tool securely at the touch of a button using force actuation and in a universal manner. • Intuitive operation: The combination of image processing »pilot 4.0«, a high-resolution industrial camera and the large 24" monitor makes tool measurement extremely easy and detailed. • Maximum flexibility: Whether directly next to the CNC machine, centrally in the workshop or in state-of-the-art production cells – the system adapts to your environment. • Ergonomic & well-designed: A robust foil keyboard controls spindle clamping, brake and indexing. The included thermal label printer ensures immediate and error-free labeling of your tool parameters. _____ Technical data: Measuring range Z: 450 mm / 620 mm / 820 mm Measuring range X: 210 mm / 310 mm Max. tool Ø: 420 mm / 620 mm Bore gauge Ø: 100 mm Length: 1,030 mm Knedpfx Anovphv Toxob Width: 1,850 mm Height: 2,150 mm Weight: approx. 500 kg Software and camera: ZOLLER image processing »pilot 4.0« and industrial HD camera Scope of delivery: • ZOLLER VENTURION 450 + PC, software and printer • Adapter for SK 40 / VDI 40 / VDI 50 • Complete manufacturer documentation Contact and inspection: The machine is in excellent condition. An inspection while powered on is possible after prior arrangement.

Condition: new, Mitsubishi AC servo motor HC202BS IEC34-1 Without encoder, unused with traces of storage, 100% functional, scope of delivery as per photos Kodpfx Ajqx A H Uonxjnb

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Knsdpfel Rix Njx Anxjb Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: ready for operation (used), Siemens 1PH6135-1NF46-0AA0 motor, serial number: EH110032582001, with ERN 1387 encoder (2048 SIG/R) and 2CW8 366 fan, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Knsdpfjzb T Sbjx Anxsb

Condition: ready for operation (used), Siemens 1PH6135-4NF46 motor, serial number: EH380165108001, with encoder ERN 1387 2048 SIG/R, used, in good condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Kedpfozb T Snox Anxonb

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, rotational speed (min.): 2,947 rpm, input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Product Description: ABB M3HP 180MLB (2019) ⚙️ Device Type: Three-phase, low-voltage squirrel cage induction motor, ABB M3HP series – designed for industrial applications requiring high reliability, energy efficiency, and long service life. 🔍 Construction and Features: - Model: M3HP 180MLB - Housing: High-strength cast iron, mechanically durable and corrosion resistant - Cooling: IC411 (external self-powered axial fan, integrated under protective cover) - Protection rating: IP55 – protection against dust and water jets from any direction - Mounting configuration: B3 – foot-mounted (other variants, e.g., B5, available within the same motor family) - Bearings: High-quality ball bearings, suitable for continuous operation - Lubrication: Relubrication possible (grease nipples on housing available in many versions) ⚡ Electrical Specifications: Parameter Typical Value (for 4-pole version) Rated power 22 kW Supply voltage 400 / 690 V (Y/Δ) Frequency 50 Hz (optionally 60 Hz in alternative configuration) Number of poles 4 (approx. 1500 rpm at 50 Hz) Rated current approx. 40–42 A at 400 V (exact value per nameplate) Efficiency class IE2 or IE3 (depending on factory version) Insulation class F (winding temperatures up to 155°C permitted), utilizing class B 📏 Mechanical Dimensions: Parameter Value (typical IEC data) Shaft height 180 mm Shaft diameter 48 mm Shaft length 110 mm Mounting holes spacing (feet) 279 x 279 mm Overall length approx. 580 mm (incl. fan and cover) Weight approx. 180–210 kg (depending on execution) ⚠️ Dimensions may vary slightly depending on the version – for details refer to ABB documentation (IEC 60072-1 compliant). 🏭 Application: The ABB M3HP 180MLB motor is widely used in industry, particularly in: - Pump stations and hydraulic systems (centrifugal, deep-well, and circulation pumps) - Fans, blowers, HVAC systems - Belt conveyors, production lines - Mixers, mills, for both intermittent and continuous duty - Specialized machinery in food, wood, and chemical industries ✅ Key Advantages of the M3HP 180MLB: - High reliability – proven ABB design, robust cast iron housing, resistant to harsh environments - Energy efficiency – compliant with IE2 or IE3 standards (lower power consumption) - Easy integration – IEC standard compliance, universal dimensions, wide range of accessories - Customizable – options with PTC sensors, encoders, brake, various mounting configurations - Long service life – relubrication capability, premium grade bearings - Quiet operation – low noise level, meets environmental standards 📦 Condition and Storage: - Year of manufacture: 2019 Ksdpfx Anew Ifb Ujxjnb - Factory-new, unused motor, stored under controlled conditions (dry, vibration-free, in accordance with ABB guidelines) Price is per unit – 2 units available. Immediate delivery.

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment Knedpjw Dvv Ajfx Anxsb - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: excellent (used), Year of construction: 1999, LVD PPEB110/30 CAD-CNC 110T Serial number: 26225 Year of manufacture: 1999 Knsdozzafgspfx Anxeb Bending length: 3050 mm Servohydraulic bending system Precise slider positioning using a linear encoder Suitable for precise sheet metal bending.

Condition: ready for operation (used), Year of construction: 2019, Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg. Knjdpsr Dd H Sefx Anxob

Condition: used, ROD 426 500 02S12-76 Identification No. 318 591-01 Serial No. 8 194 998 A with cable and plug As new Kodpfx Anozrxqvjxonb

Condition: used, HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Kjdpfx Aoukxv Nenxenb Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 2,500 kg, grinding spindle motor power: 11 W, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Kodpfx Ansxmhyijxenb Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: used, Technical specifications - Robust steel frame construction - Dust-protected linear guides - Digital servo drives on the X, Y, and Z axes - X-axis with rack and pinion drive - Y and Z axes with ball screws - Rapid traverse rate: X/Y axes: up to 50 m/min - Z-axis: up to 15 m/min - Maintenance-free servo motors with high-resolution encoders - Integrated extraction system for machining units - Additional extraction connections Knedpozutp Sjfx Anxjb - Manual loading and unloading of workpieces - Pneumatic positioning stop - Work area - Workpiece length: 200-3,050 mm (with roller conveyor) - Workpiece width: 50-1,250 mm - Workpiece thickness: 8-80 mm - Electrical data - Power supply: 400 V / 50 Hz - Optional equipment - Air-conditioned control cabinet for operation at temperatures above 35°C - ECO-Plus energy-saving mode with automatic standby, drive shutdown, and control shutdown

Condition: ready for operation (used), Mitsubishi HA33NC-S servo motor, serial number: 15017 + OSA253S2 encoder, serial number: J4AVU492R6S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ksdpfsi D I Rgjx Anxenb