Used Enveloping for sale (150)

Condition: ready for operation (used), Year of construction: 2006, Two inserting machines are available. 1) Grützmacher Rubin C5, max. mechanical output: 7500pieces/h, envelope format range: C6-C5, min. insert size: 99mm/148mm, max. insert size: 148mm/210mm, max. filling thickness: 5mm. 2) Bell and Howell CEXP-6RC, year of manufacture: 2006, max. mechanical output: approx. 10000cycles/h, envelope format range: C6-C5, max. insert dimensions X/Y: 110mm/220mm. Machine dimensions X/Y/Z: approx. 2200mm/950mm/1250mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Caodpfxsxt Rmxs Aflea

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 100037280, Printing system: Fixed head, Memjet, full color Color printing: up to 16.8 million colors Print output: 7500 envelopes/h Print area: 215 x 431 mm Minimum material size: 107 x 76 mm Maximum material size: 431 x 241 mm Material thickness: 0.5 mm Built-in fonts: All available TrueType fonts Additional fonts downloadable: yes Barcode printing: yes Cedpfx Aswktrzofljaa Graphics printing: yes Ink tanks (or compatible): Special inks with a capacity of 250 ml each Interfaces: USB and Ethernet Monthly output: 500,000 prints without a stand

Condition: ready for operation (used), Year of construction: 2015, A Neopost inserting machine is available. Inserting capacity: 4500 letters/h, inserting capacity with 2 sheets (collected): 3400 letters/h, envelope feeder capacity: 400, inserting liquid tank: 1, document feeder capacity: 500 sheets. Envelope thickness: 4mm, min. document dimensions X/Y: 76mm/140mm, max. document dimensions X/Y: 228mm/406mm, min. envelope dimensions X/Y: 89mm/152mm, max. envelope dimensions X/Y: 165mm/264mm. Fold types: Spiral fold/Z-fold/single fold/double fold/parallel fold/non-fold. Machine dimensions X/Y/Z: approx. 3600mm/550mm/600mm, weight: approx. 400kg. Including the underframe (piece of furniture - green). Documentation available. On-site inspection is possible. Expected to be available from mid-May 2025. Casdpfx Aev N I Aysflea

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 762 mm, resolution (max.): 600 dpi, machine/vehicle number: 63507120672, production capacity: 40,000 unit/h, Submission of a bid obliges the buyer to collect the item within the stipulated period, no later than 31/12/2025! TECHNICAL DETAILS Printing technology: Inkjet Number of print units: up to 4 Number of ink cartridges: 12 Print resolution: 600 dpi Print speed: 40,000 addresses/hour Print area: 762 × 152 mm Paper formats Min. paper size: 85 × 40 mm Max. paper size: 762 × 520 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 1,476 × 58 × (810 – 915) mm Weight: 131 kg EQUIPMENT Feeder for filled envelopes or finished brochures Double tabber for sealing self-mailers or applying labels Codpfx Afjxyf E Aoleaa Vacuum transport belt Direct printing system with 6 print heads (IR possible) Belt delivery at a 90° angle

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Casdpfxsw Ttxfe Aflja Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Cjdjxyfmgepfx Aflsaa Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Codpsxy Iz Tefx Aflsaa Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco

Year of construction: 2019, condition: used, Power: 1 kW (1 HP) Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. Cajdpfx Aox Atlveflsa A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Documentation available

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, HAAS CNC control / 4th axis drive and wiring / 15" color LCD screen High-speed 24-position side-mount tool changer reducing cycle times and increasing work envelope Rigid tapping / The machine comes with a 5C 4th axis. Cjdpfx Aex A Tttjfleaa USB port / 4th axis interface / Haas HA5C indexer / Rigid tapping Spindle orientation / High-flow coolant pump / Green operation indicator light Full enclosure / HaasConnect - remote monitoring / Ethernet interface Air blast on viewing window / High-flow coolant pump kit (150 L) / Chip auger

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 6,227 h, power: 57.4 kW (78.04 HP), load capacity: 272 kg, mast type: telescopic, lifting height: 43,150 mm, lifting power: 272 kg/m, platform length: 2,440 mm, platform width: 910 mm, overall weight: 21,092 kg, transport length: 12,830 mm, transport width: 3,940 mm, transport height: 3,070 mm, construction height: 3,070 mm, fuel type: diesel, fuel consumption per hour: 10 l/h, fuel tank capacity: 151 l, tire size: 445/50D710, tire condition: 70 %, wheelbase: 4,110 mm, color: blue, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2008 Hours: 6 227 h Working height: 43.15 m Maximum horizontal outreach: 21.26 m Platform capacity: 272 kg Platform dimensions (L × W): 2.44 × 0.91 m Turntable rotation: 360° continuous Platform rotation: Yes, 160° Boom type: Articulated knuckle boom Jib: Yes — 6.10 m (20 ft), 110° vertical rotation Drive system: Diesel Four-wheel drive: Yes (4WD) Tyres: Rough-terrain, foam-filled Stabilisers: No (Mini X-Chassis system) Engine manufacturer: Deutz BF4M 2012C, 77 hp / 57.4 kW Emission class: Stage IIIA Machine weight: ≈ 21,092 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE-certified with full documentation included Fully tested, serviced and ready for immediate use Extensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. Casdpfx Ajx Ah Huefloa === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price €47 750 (EXW / excl. VAT). This Genie ZX-135/70 (Z-135) offers one of the largest working envelopes in the industry: 43.15 m working height, 21.26 m outreach and full-time 4WD. Equipped with a 6.1 m jib, 160° platform rotation and 360° continuous turntable rotation, it delivers exceptional versatility for construction, industrial maintenance, port operations and large-scale projects. All machines from Collé Rental & Sales are CE-certified, fully inspected and ready for immediate use. Service history, inspection reports and spare parts available upon request. === LOADING & TRANSPORT === Crane loading available upon request for smooth export handling. Flexible worldwide shipping arranged by the Collé logistics team.

Condition: used, Schneider SF 60 Envelope Feeder: Single-sheet envelope feeder, year of manufacture: unknown, in good condition, immediately available. Please request a quotation. Cjdpfx Afex Af T Ejlsaa If you are interested, we are also happy to inform you about other machines in our inventory. You are welcome to arrange an appointment to inspect the machine at our premises.

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: M-10iA R-30iA Mate, load capacity: 10 kg, arm reach: 1,420 mm, controller manufacturer: Fanuc, controller model: R-30iA, teach pendant manufacturer: Fanuc, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a comprehensive 77-Point Protocol inspection conducted by our in-house robotics engineers. Brand: FANUC Model: M-10iA Controller: R-30iA Mate Payload: 10 kg Reach: 1420 mm Robot Weight: 130 kg Despite its compact size, this robust robot weighs only 130 kg and delivers a 10 kg payload with the highest wrist moments and inertia in its class. Cable and airline routing is greatly simplified with a 50 mm hollow wrist and upper arm, resulting in reduced system costs and enhanced reliability. The M-10iA can be installed on the floor, wall (at any angle), or ceiling. The J3 axis can flip over, enabling the robot to work behind itself and significantly increasing the work envelope. Delivery Time: By mutual agreement IRS Robotics® Refurbished: 77-Point Protocol – thoroughly tested on our in-house test benches, replacement with new oil/grease and batteries, fully cleaned, and repainted in your preferred RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About Us: Our daily core business is the supply of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Cedpowku Htjfx Afleaa Established in 2002. Worldwide shipping.

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an Cedpfx Asd Etadsfleaa exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot Cjdpfx Ajd Etagjflsaa letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Condition: ready for operation (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Codpfodwh U Ajx Aflsaa

Year of construction: 2007, condition: reconditioned (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM (W+D) inserter envelope inserting machine. Cjdpfx Asf A Nr Defljaa

Condition: not inspected (used), Do you want to sell your envelope inserter mailing inserting machine? Caontact UMS for a quick deal and fair price! Csdpfx Afsff Hdzeloaa

Year of construction: 2007, condition: refurbished (used), We have a Mueller Apparatebau single sheet feeder transactional channel available. Meant for feeding - reading a reading code - collating - folding A4 documents and place it into a Buhrs ITM inserter but you can also use it stand-alone or connect it to a other brand machine. Cjdped Ddkbsfx Afleaa

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Caodsd Tfiuspfx Aflsa Please contact us to get a hold of this machine for a super discount price!

Condition: refurbished (used), Year of construction: 2007, We have a Buhrs W+D BB300 10K envelope inserting system available. DL up to C4 envelopes. This machine is built in 2007. Caodpfx Aek D Hczoflea Year of built 2007 6 station base Configuration: Mueller Apparatebau single sheet feeder / transactional channel Buhrs BB300 - 10K 6 station base 5 rotary feeders 1 HF3 vacuum friction feeder Divert bin Conveyor belt This system is completely prepared for a Mueller transactional system for feeding/reading/collating/folding A4 documents. We do have multiple Mueller transactional system available as well. We can offer this optional. More and other feeders possible. Reading camera's for matching optional! Turnover module, alignment table and mailtable also availabl optional. Machine is ready after our complete maintenance programm. the machine is 100% complete and works like new. Please come over for a test if you like.

Condition: used, Year of construction: 2011, functionality: fully functional, We have here a Plockmatic DMI4000 envelope inserter module available. Year 2011 and counter is just 311.014 We do not have possible extra modules, like collating tower etc, which can be installed at this inserter module. Caodpfewzam Tsx Aflja

Condition: refurbished (used), Would you like or need to enhance your current Buhrs ITM envelope inserting system? That is possible, we have all the possible original modules to do so! We have all the original modules available which can be installed at the beginning, on top of the maschine base, or at the end of your Buhrs ITM (W+D) envelope inserter can be installed. Cedpfx Ast Akt Dsflsaa Possible modules: - Mueller Apparatebau single sheet feeder transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Mueller Apparatebau paper cutting sytems for continues paper to single sheets A4 documents transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Buhrs ITM turning belt modules - Buhrs ITM Alignment modules - Buhrs ITM Mailtable module - Buhrs ITM feeders like - rotary - friction and shuttle feeders To enhance and or upgrade your current Buhrs ITM BB300, BB600 or BB700 machine? Yes it is possible!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder Codpfswml S Eex Afloaa - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2009, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Turning belt with alignment table - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL Casdpov Ebx Hefx Aflja - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! Cjdpfxoq Ec Rgs Afljaa AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.