Used Enveloping for sale (150)

Condition: excellent (used), Year of construction: 2014, About the Machine The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be Casdoixz Iqjpfx Aflsa oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerless print and apply labeling system with stand. • Sorting, consisting of: • Multiple parcel sized outputs into 1 meter (39 in.) containers • Bin Confirmation sensors • Tray label printers • Overhead system displays for the operators The system is design to handle throughputs up to 5,000 pph. Parcel Specifications The system can handle various types of parcel products including but not limited to envelopes, corrugated boxes, polybags, cellophane covered boxes, soft packs, and vacuum-sealed products. The table below specifies the range of product for the Parcel Manager system. Feeding limitation includes high aspect ratio, the proportional relationship between its width and its height, pieces and pieces with significantly irregular surfaces. The product can be fed and processed in either portrait or landscape orientation. Below the specifications for packages that the Parcel Manager can handle. Parcel Specifications Length (distance along transport path) min. 150 mm (5.9 in.) max. 600 mm (23.6 in.) Width (distance perpendicular to transport path) min. 100 mm (3.9 in.) max. 300 mm (11.8 in.) Height/thickness (distance above transport bed) min. 5 mm (0.196 in.) max. 160 mm (6.3 in.) Weight min. 0.014 kg (0.03086 lb) max. 13.6 kg (30 lb)

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Cajdoxk Tuaspfx Aflja

Year of construction: 2011, condition: excellent (used), machine/vehicle number: 3130055185, with Freeflow Printserver and Clear Toner Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum Print Image Assurance: 12.48" x 19.05" (317 mm x 484 mm) Machine can staple, punch, fold & front cut Caedjh Nvm Dopfx Aflea Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Various spare materials: Contains 1 bottle Blaue, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Tonner Bottle 2x Tonner Waste Container 10x Cartridge M 006R01472 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assembly 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Csdpfx Aewnriajfljaa Siemens touchscreen

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the bag into a paper envelope. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Output device for grouped bags (5 pieces). - Specifications: max. speed of the machine in neutral: 110 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; paper envelope dimensions LxW: 70x65 mm; material paper envelope: paper 70g/m²; label (LxW): 28x24 mm; thread length: 210 mm; power supply: 380V; power consumption: 1.5kW; machine dimensions LxWxH: 1700x900x2000 mm; weight: 640kg. Caedpev Nliqofx Aflsa Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2025, functionality: unexamined, Envelope inserting machine / inserting system 0 KAS Mailmaster 465HS-4 – Year of manufacture 11/2016 / Location: 24589 Dätgen (Schleswig-Holstein) LSV1208 We are offering for sale an inserting system, as per the following: 0 KAS Mailmaster 465HS-4 from 11/2016. The inserting system has been dismantled and placed into storage. It was purchased on 17.12.2020 for a then price of €107,880.00. The machine is located in 24589 Dätgen (near Hamburg). Shipping within Germany is possible. Additional photos are available upon request. You are welcome to submit a price proposal. Reasonable counter-offers will be considered. When inquiring, please provide your complete contact details! Delivery can potentially be arranged for an additional fee. You are also welcome to inspect the unit onsite. Simply call to arrange an appointment. This item comes from insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. The sale takes place without any warranty. Liability, reduction, rescission are expressly excluded. We recommend an inspection prior to purchase, as the item is sold as seen. Cajdpfow Urvrjx Aflja All information is given without guarantee. Subject to errors and changes. The item is sold as inspected onsite, in used condition, under retention of title, and with the exclusion of any warranty for visible and hidden defects, in particular defects of a technical, qualitative, or functional nature as well as usability. Due to time constraints, we will only respond to serious inquiries and price offers! This is an advertisement for informational purposes only. Viewing is only possible by appointment! Best regards

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Caodsibx S Nspfx Afloa Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: ready for operation (used), Year of construction: 1989, Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible. Csdpfx Aexbrxljfljaa

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts Caedjh Eibaepfx Aflsa For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: ready for operation (used), Can format can be round as well as oval or rectangular. Casdpfjvy Tt Sox Aflja Suitable for food cans. Several sizes available.

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the bag into a paper envelope. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Output device for grouped bags (5 pieces). - Specifications: max. speed of the machine in neutral: 110 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; paper envelope dimensions LxW: 70x65 mm; material paper envelope: paper 70g/m²; label (LxW): 28x24 mm; thread length: 210 mm; power supply: 380V; power consumption: 1.5kW; machine dimensions LxWxH: 1700x900x2000 mm; weight: 640kg. Csdpfxev Nm R Ns Afloaa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Working envelope (X/Y/Z): 450 × 450 × 450 mm Maximum workpiece height: 700 mm Pallet size: 320 × 320 mm Maximum pallet/table load: 300 kg Spindle Number of spindles: 2 Tool spindle: 10,000 rpm, 95 Nm Speed extension: 18,000 rpm Tool interface: HSK 63 Feed Acceleration: 10 m/s² Rapid traverse: 60 m/min Chip-to-chip time: 2.6 s Tool Magazine Tool positions: 2 × 60 Tool magazine with 60 positions: included MACHINE DETAILS Weight Machine weight: approx. 14 t Control Control system: Siemens Sinumerik 840D EQUIPMENT Double-spindle, 4-axis horizontal machining center 4 machine pallets Renishaw probe Infrared receiver for probe, Renishaw model Vaf72a0p Operator panel at workpiece setup station Operator panel at tool setup station Workpiece setup stations manually rotatable Hydraulic workpiece clamping, 60 bar Pneumatic support control at workpiece setup stations Automatic swing door Extended coolant supply 70 bar / 1,500 l VF 250 coolant chiller Work area flushing Emulsion mist extraction Roto-Clear Automatic setup sequence Automatic teardown sequence Run-time and quantity recording Status lamp, 3 colors Modem for remote diagnostics Control cabinet lighting Cjdpfx Ajwx Er Nefljaa

Year of construction: 2008, condition: excellent (used), Bizerba CWL Eco flex continuous scale with Sick VMS520 volume measuring system Bizerba CWL Eco flex continuous scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sortation systems and feeding lines. Bizerba WM-CWL flex Conveyor scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0,4 kg 230 V Sick VMS520 Volume Measuring System Special features - Non-contact, active measuring method Cedpfxsmgax Us Afloaa - Measurement of length, width and height of cuboid objects - Measure length, width and height of objects with almost any shape - Works with a wide range of surface structures and on various flat conveyor systems - Flexible system configurations - Calculation of the small enveloping cuboid (box volume) - Calculation of real volume Device components Sick VMD520-2000 Volume measuring device Sick CLV 490 Stationary barcode scanner Year of manufacture: 2008 Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1996, Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible. Codpfexbrxfsx Aflsaa

Condition: excellent (used), machine/vehicle number: 12991843, Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Caodpjic N Epsfx Aflsa Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation

Condition: used, Year of construction: 2003, Model: TYPHOON 15.33.13 Manufacturer: Brown & Sharpe – DEA SpA (Hexagon Group) Serial number: TY15000033 Year of manufacture: 2003 Location: Str. del Portone 113, 10095 Grugliasco (TO), Italy Structure type: Bridge-style coordinate measuring machine (CMM) Measuring volume (X / Y / Z): - X: 1500 mm - Y: 3300 mm - Z: 1300 mm Guiding system: - Air bearings on granite and lightweight alloy structure - Dynamic temperature compensation Scale resolution: 0.1 µm (optical) Typical volumetric accuracy (MPEe): ~2.5 + L/300 µm (depending on configuration) Probe head: - Renishaw PH10 / SP25 / TP200 compatible - Automatic indexable orientation Controller: - DC800 or equivalent Hexagon system - Software: PC-DMIS, QUINDOS compatible APPLICATION OF THE DEA TYPHOON 15.33.13 High-end coordinate measuring machine (CMM) used for precision inspection of complex medium-to-large components. Ideal for automotive, aerospace, and general mechanical sectors. FEATURES / DIFFERENTIATORS – TYPHOON 15.33.13 Csdew Dt T Espfx Afljaa - Extended measuring envelope: 1500 × 3300 × 1300 mm - High accuracy with thermal compensation - Motorized indexable head for multi-angle probing - Compatible with scanning probes and multipoint systems - Rigid granite base and lightweight bridge construction

Condition: excellent (used), Conveyor belt for envelope inserting system BB Total length: 2.5 m Width: 400 mm Caodow Nxxvspfx Aflea Belt width: 340 mm

Year of construction: 1995, condition: used, machine/vehicle number: ref. BM4933, Ref. BM4933 top machine! This machine puts inserts into envelopes Inserter stations (2) safety features double-/missing sheet detection air suckers feed from bottom of pile envelope counter Insert dims 156x244 to 84x114mm Codpfx Afsbzlzxjleaa envelope dims max 156x244mm min 89x171mm working speed up to 10.000 envelopes/hr variable speed adjustement

Condition: ready for operation (used), Year of construction: 2020, Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible. Cajdpfxsw Tc Sbj Aflea

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Cajdpoh Icf Ujfx Aflea Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: ready for operation (used), Year of construction: 1967, A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible. Casdpfxovva Hqo Aflea

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz Cedjw Rvu Djpfx Aflsaa

Condition: ready for operation (used), A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible. Csdpfjtq Hbfex Aflsaa

Condition: ready for operation (used), A cart beam die-cutter Schön is available for die-cutting envelopes, leather, textiles, foams, rolls and sheets. Pressing force: 300kN, max. sheet format X/Y: 1400mm/1000mm, pressure plate rotation speed: 200°/s, repeat accuracy: +/-1°, return stroke speed: 200mm/s, machine dimensions X/Y/Z: approx. 4200mm/2500mm/2500mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Codow Azuujpfx Afljaa

Condition: ready for operation (used), Year of construction: 2000, Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible. Csdpjv Rp R Uefx Aflsaa