Used Eurosystems M 220 for sale (33,758)

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Rjdpfx Ajxyt T Ueh Ujl Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: used, Year of construction: 2009, Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps)  Rodpoxrfcxsfx Ah Uel

Year of construction: 2021, condition: new, Gastro M Electric grill plates Demonstration unit without original packaging. NEW with warranty. The Gastro M series is robust, powerful, energy-saving, easy to clean and have a modern look. All units are made of stainless steel and can be connected with connecting bars. Gastro M is the indispensable link in the professional kitchen Electric grill plates with smooth grilled surface. Fast heat-up time, built-in grease drip tray, thermostatically controlled zone with built-in on/off switch and pilot light. Easy to clean. Stainless steel housing High quality cast steel plate Integrated fat collection drawer Adjustable thermostat Even heating Redpjhgwd Tofx Ah Ujl Suitable for base cabinet AGL913 & base frame AGL911 Specification: Gastro M Model 60/30FTE 300mm wide Power: 3kW/400V Dimension: 600(D) x 300(W) x 280(H)mm Weight: 27kg Accessories on request If you wish a detailed consultation, please contact us All dimensions = approximate Photo similar

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Redpfx Asir E E Ejh Usl Incl. Sampling unit specicon

Condition: excellent (used), functionality: fully functional, Hot runner device for 20 channels With cable Fully inspected, fully functional Rodpfxjx Hi R Ss Ah Uol

Condition: used, Four in a Row – The Success Factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Chipboard approx. 4,000 m² Panel size: 3,200 mm x 1,000 mm x 38 mm P6 coating Net sqm price: €8.00 This is a used item. PLANNING & CONSULTATION Our sales team will gladly provide you with a non-binding offer tailored to your requirements. Redjvdqhbepfx Ah Usl TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price stated is a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT itemized. ABOUT US The company DLK in Nordhorn sells new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and craft businesses. We continuously offer attractive used items from various manufacturers/brands at competitive terms. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader Rjdpfsqvmkdox Ah Usl - automatic unloader for textiles - fully working - not much use

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Rsdpfx Ahsx Hqmns Uel Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: used, Conveyor transporter for feeding products to a height of 400 cm. Rsdpevzz T Asfx Ah Ujl Currently, the conveyor was used to feed preforms to a PET bottle blow molding machine, but it can also be used for transporting other products to significant heights. Manufacturer: M. TANNER AG Model: VZT-2000 Conveyor height: 4300 mm Belt width: 500 mm Weight: 850 kg All components included with the machine are shown in the photos. Machine condition: used, requires technical inspection.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Rsdjvlgzajpfx Ah Uol Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Rjdpfjw Ufhbjx Ah Uol Mint condition Counterknives fully rewelded and hardfaced Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Contact us for price and further details.

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Rodpsdzc Rxjfx Ah Uel Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Rjdpfxjw Syyys Ah Usl

Condition: used, functionality: fully functional, empty load weight: 6,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2008, loading space length: 6,400 mm, loading space width: 2,500 mm, loading space height: 3,170 mm, total length: 9,000 mm, total width: 3,250 mm, total height: 4,000 mm, suspension: air, tire condition: 60 %, color: yellow, trailer brake: trailer braked, Year of construction: 2008, Equipment: ABS, Truck trailer with Edscha sliding roof First registration: 05.12.2008 L/W/H: 9000/2550-3250/4000 mm Internal length: 6400 mm Unladen weight: 6,920 kg Gross vehicle weight: 24,000 kg Inspection valid until: 11/2025 Equipment: - Loading ramps, 14 t load capacity + supports - Hydraulically extendable rear portal Rsdjx Ati Uopfx Ah Uel - Lifting roof - Oversized width up to 3.25 m under tarpaulin - Interior height 3.17 m

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns Rsdpfx Aexdvhpeh Ujl - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Redpfx Asxta U Eeh Uel Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: good (used), Heidelberg STA- M 30F Pharmacy Standing delivery Rjdpew D E Nlefx Ah Uel Manufactured by Heidelberg, Germany. Can be connected to any Heidelberg, Herzog Heymann, MBO, Horizon, etc. folding machine. The device also works independently of the folding machine. Smooth adjustment of the delivery speed. Height adjustment. Packet counter with delivery shift.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. Rjdedzc Rfspfx Ah Usl A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Optional side and end stops for floor cassette assembly

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Rsdpfx Ajxn Ax Aeh Usl

Condition: used, Year of construction: 2011, Technical details: measuring range X-axis: Länge: 0 - 160 mm measuring range Y-axis: Höhe: 0 - 425 mm Tool table: Auflage: Ø 95 mm tool taper: SK 50 tool taper: drehbar 360° weight: 12 kg dimension L-W-H: 420 x 165 x 775 mm Rjdpfx Ahju N Arte Uel This is a bench top unit. Application: Alignment of rotary milling tools. Measuring method: manual alignment with/via digital display Measuring bar manually movable Measuring beam transverse (X) 160mm and vertical (Y) 425mm movable with measuring sensor Measuring display: both axes digital, voltage 1.5 V (AA battery) *

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Rjdpfxofv Hiqs Ah Usl Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs Redjfqmtkjpfx Ah Usl

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Rjdpfx Ahsb Tmrve Ujl Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Rodpfxspahmhj Ah Uol Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Redpfen Up R Iox Ah Uel 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm