Used Faceplate for sale (608)

Condition: used, weight / kg taper MK / Gkedpfsvcd N Asx Akhsd Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Gsdpfsvxa Tpex Akhjkd Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm weight of the machine ca. 18000 kg total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Gedox Tu Suopfx Akhokd Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Godpfx Akoy Htilehokd Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate Gjdpfx Akod Irbcjhokd -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Gkodpozvl R Rofx Akhsd Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,500 mm, total height: 5,600 mm, total width: 4,400 mm, total length: 3,900 mm, rotary table diameter: 1,250 mm, type of input current: AC, rotational speed (max.): 315 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 1 rpm, spindle speed (max.): 315 rpm, table diameter: 1,250 mm, year of last overhaul: 2016, Equipment: documentation/manual, Berthiez TFM 125 Vertical boring and turningmill with toolholder changiging device The machine its from 1978 but has been retroifit in 2016 with new Siemens Sinumerk 840D solutionsline This is an high presition vertcal turningmachine with grinding device. Lots of tools its following the machine. The machine its in very good condition! Diameter of table 1250mm Max turningdiameter 1500mm Max turninghigh 1000mm Gjdozvydlspfx Akhjkd Table high 670mm Max turning table speed 315rpm Spindle 39KW Scale on both axis

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Type: VCE 2000 FMC Control: SIEMENS 840C Year: 1998 Gkjdowb Ayiopfx Akhsd

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate Gkedpfxswcdw Eo Akhsd -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 450 mm -Reference: Short cone 6 (Ø 102-105 mm) -Bolt circle: Ø 133 mm Gksdpfx Aoxc D Nrekhed -Through hole: Ø 80 mm -Groove width: 18 mm -Dimensions: Ø 450 x 200 mm -Weight: 65 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. Gsdpfx Aoyfurqskhekd - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm Gkjdpfx Akoxuflfshod -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: used, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1200 mm turning speed range - milling 1 - 240 U/min Control Siemens SIN 820T ram head - cross travel 1000 mm Godpfsyuqdzex Akhekd total power requirement 55 kW A.T.C. 12 positions Tooling

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Feed size: Ø 450 mm Gkodpfx Asb A Rddjkhjd -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft Gjdpeb A Rd Eefx Akhskd -Weight: 22 kg

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm Gjdpfxob A Rfce Akhskd -Bolt circle: Ø 135 mm -Weight: 18 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm Gsdpfeb A Szgox Akhjkd -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck Gkedpfx Aksb Hbyhjhod -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck Gkodpfxeb A Ih Ae Akhed -Mouth size: Ø 320 mm - Mounting thread: Ø 60 mm inside -Weight: 30 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate Gkjdpfxet Sz Evj Akhed -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support Gedpfxoku Aaas Akhskd 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm Gkodpfxjfg Th Ao Akhed -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm Gjdpfx Akod R Ew Tjhskd -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 750 mm -Short cone: 8 (Ø 140 mm) -Bolt circle: Ø 171 mm -Weight: 248 kg Godpfsdi Sl Njx Akhokd

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 400 mm -Conical mount with groove: Ø 105 mm Gksdpsduiw Tofx Akhed -Passage: Ø 80 mm -Weight: 35 kg