Used Fbc Chopper for sale (108)

Condition: good (used), Year of construction: 1986, working width: 500 mm, overall weight: 12,500 kg, machine/vehicle number: 017128, CASE IH 1660 axial flow Bjdpfovr Dxpjx Aiwjww Brand: Case IH Model: 1660 Year: 1987 Operating hours: 3,300 h Cross-section width: 5.00 m Various types of equipment: straw chopper, straw spreader

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Bwjdsirt H Ajpfx Aiwjw Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz Bwsdszxq U Hopfx Aiwow - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2520 CNC sheet metal bending machines are characterized by their high flexibility, efficiency, precision, and a high degree of automation. They are suitable for processing housings, doors, and other components. They are widely used in industries such as kitchen appliances, control cabinets, power electronics, elevators, etc. Technical data: - automatic tool change - bending length: 2500mm - maximum sheet width: 1500mm - max. diagonal length: 2800mm Bwodpfx Ajzyadyjiwsw - max. bending height: 200mm - max. material thickness: stainless steel 1.2mm / aluminum 3mm / structural steel 2mm - min. sheet thickness: 0.35mm - possible angles: 0°-180° - inner radius: 0.8-1.2 - Dimensions: 5.4m x 4m x 2.9m - Weight: 19500kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hanover and will be available from October. We have been distributing YAWEI machines throughout Europe for more than 20 years. Service and spare parts supply are provided by H+S, all from a single source.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Bsdpey Ub E Djfx Aiwoww Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Year of construction: 2016, operating hours: 50 h, condition: like new (used), functionality: fully functional, Impiantinox Easybräu SCB 500 brewing system consisting of mash/boiling kettle, lauter tun, hot water tank Agitator in the mash tun Chopper in the lauter tun Electrically or steam heated Electrical connection 40 kW Steam condenser in the boiling kettle Bodpfx Aioq H Azzjwjww Brewing volume from 3.5- 7 HL Complete internal piping with pumps, electric heating Heat exchanger for wort cooling Wort aerator

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,200 mm, total width: 5,650 mm, total height: 2,380 mm, overall weight: 2,610 kg, input voltage: 400 V, loading space height: 1,960 mm, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Bjdpfxjzw En Ej Aiwjww The ASCO® VS MEDI FBCB MOBILE is a robust and high-performance vibratory screening machine designed for efficient screening and separation of a wide range of materials. It is suitable for recycling, construction, landscaping, soil screening and material processing, providing reliable screening performance for demanding applications. With a screening performance of up to 60 m³/h, the machine enables efficient material processing and high productivity. The integrated front and back conveyor belts provide direct discharge of screened material, improving material flow, reducing handling time and supporting efficient downstream processing. Key Features: • High screening performance • Front & back conveyor belts • Large screening area • Powerful electric drive • Versatile screening applications • Efficient material handling Tech Highlights: Performance up to 60 m³/h · Bucket width max. 2.3 m · Screen area 2.7 m² · Drive 400 V / 2 × 0.55 kW · Weight 2,610 kg · W 3.75–5.65 m · L 2.20 m · H 2.38 m · Loading height 1.96 m · Conveyor width F: 0.40 m / B: 0.60 m · Conveyor length F: 3.00 m / B: 2.60 m · Conveyor drive 400 V – F: 1.1 kW / B: 2.2 kW · Fuse 16 A · Conveyor speed fixed (adjustable on request)

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 19632, Eldan Super Chopper SC1412T for tyres, cable, wood, plastic or waste Hägglunds NB 400 S N 02 12 heavy duty frame vibrating extractor hopper cabinet very clean machine Bwjdpfx Aisl Tn Uiewow

Condition: used, Year of construction: 2019, Fruit reception: Water bath, fruit conveyor with water shower, chopper Packing press type H65: Capacity: 1,200 kg/h Yield up to 75% 24 press inserts (65 x 65 cm) 22 press cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Bjdpfxjzty Ixs Aiweww Additional title: Fruit reception with water bath, fruit conveyor, chopper and packing press Capacity: 1200 kg/h Features: Water bath, fruit conveyor with water shower, chopper, packing press with 24 press inserts and 22 press cloths

Year of construction: 2006, condition: used, X-axis: 570mm, Y-axis: 370mm, Z-axis: 350mm, working area dimensions: 1050x720mm, U/V-axes: 120x120mm, taper angle: ±20°, max. workpiece dimensions: 770x520x340mm, max. workpiece weight: 1t, wire diameter: 0.15-0.3mm, wire tension: 3-23N, max. wire feed: 420mm/s, floor-to-table distance: 995mm, dielectric tank external dimensions: 725x2550mm, weight empty: 600kg, capacity: 800l, connected load: 15kVA, control: Sodick LQ33W, length: 2600mm, width: 2740mm, height: 2390mm, machine footprint: 3700x3900mm, machine weight: 4.6t, cutting time: 13,775h, machine-on time: 62,484h, with Super-Pika, wire chopper, SMS box with wall-mounted enclosure, an on-site inspection is possible. Bjdpfx Aioz Ekdfowsww

Condition: used, Comprehensively tested and refurbished used Morton-Lödige model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Material: Stainless steel (304) Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Bwjdpfjykn Sujx Aiwow Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Click on the link below to see a video of the machine running. Dimensions: 1,800mm straight side x 760mm diameter

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Bjdpfegabfbox Aiwoww Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Bodpex I Akuofx Aiwoww Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading Bsdpfx Aiox D Ryysweww • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: excellent (used), Model Gral 300 Total contents 300 litre Jacketed bowl with trolley Useful contents 1/2 tot 2/3 Power of mixer motor 16 -24 kW- double speed Rotation speed mixer arm I speed : 120 - II speed : 185 rpm Power of chopper motor 7- 9 kW – double speed dahlander Rotation speed chopper arm I speed : 1297 - II speed : 2524 rpm Hydraulic motor 1,5 kW Bowl Doubel wall jackted suited for heating and cooling Bwjdpjgn Ehajfx Aiwjw Dimensions Height 2.900 mm Depth 1.600 mm (without valve) Width 1200 mm ALL PRODUCT CONTACT PARTS AISI 316

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Bwsdpfxsykn She Aiwsw Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring Bjdpfoim I Ruex Aiwjww List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: excellent (used), Mixer - Grinder KOLBE -Type: MWE 32 Bwodsup Eptjpfx Aiwew -Diameter: 100mm -Chopper volume: 120l -Capacity for 3 mm: 1400 kg/h -Mixing speed: 24 rpm/min -Power main motor: 5,5 kW -Power mixing motor: 1,1 kW -Dimensions: 1250 x 800 x 1350 mm -Weight netto: 480 kg -Condition: Used

Condition: used, Year of construction: 2002, Manufacturer : Lodige Model : ECO 600 Year : 2002 Type: Ploughshare mixer Bjdpfx Aszv Uzfsiweww Type of mixing tool: plain blade Volume : 600 litres Material: stainless steel Number of ploughshares: 6 Power main motor : 18,5 kW Side knives: 1 chopper, 5.5 kW Technical documentation available Dimension : 270 x 135 x 109 cm A machine similar to the FKM model.

Condition: used, Year of construction: 2007, Fabricant : WAM Model : WBHY 550 PO Year : 2007 Type : Ploughshare mixer Total tank capacity: 550 L Useful tank capacity: 518 L Material : stainless steel Number of ploughshares: 4 + 2 blades Spray nozzle: liquid injection Bedpfxoziqfms Aiwjww Choppers : 2 (ATEX motors: 4 kW) Main motor power: 18.5 kW Machine dimensions: 130 x 230 x 145 cm Weight : 2000 kg Plan to install an electrical box: this request may be subject to a separate quotation

Condition: like new (used), Industrial Automatic Onion Peeler – Stainless Steel Industrial automatic onion peeler, designed for the continuous removal of the onion’s outer skin within professional vegetable processing lines. The equipment provides an automated solution for peeling and cleaning onions, reducing manual handling during product preparation and facilitating its transfer to the next stages of the process. Its robust stainless steel construction makes it particularly suitable for industrial food environments where hygiene, ease of cleaning, and corrosion resistance are essential. MAIN FEATURES Bedpfjzwv D Rsx Aiweww -Type: Industrial onion peeler -Application: onions -Function: removal of the outer skin -Automatic and continuous processing -Robust stainless steel construction -Designed for industrial food processing plants -Suitable for continuous production -Accessible construction for cleaning and maintenance -Adjustable support legs -Motorized processing system -Integrable into existing onion processing lines -Compatible with feeding and discharging conveyors APPLICATION The machine is designed for the automatic peeling of onions as part of an industrial vegetable preparation and processing line. Onions are continuously fed into the equipment, where the peeling system removes the dry outer skin. Subsequently, the product can be discharged to the next stage of production. It can be integrated with: Onion feeding systems Elevators and conveyors Inspection tables Washing equipment Choppers and slicers Dicing equipment Sorting and grading systems Packaging equipment APPLICATIONS Particularly suitable for vegetable processors, onion processing plants, manufacturers of frozen products, ready-made meals, and food industries seeking to automate onion preparation. It is suitable for facilities where a continuous supply of peeled onions is required before cutting, slicing, dicing, cooking, freezing, or further processing operations. Its stainless steel construction allows it to be integrated into both existing and new onion processing facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Bwsdpox R Dbmsfx Aiwew Video available in operation Digital documentation

Condition: excellent (used), functionality: fully functional, VEMAG HP30E | Vacuum filler with chopper and loading system Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP30E Power supply: 400 V / 50-60 Hz / 3 phases Hopper capacity: 350 liters Filling capacity: Up to 8700 kg/h Portioning range: From 1 to 99,999 g Bedpfxsziqr Tj Aiweww Portioning speed: Over 600 portions/min The VEMAG HP30E is one of the most powerful and reliable vacuum fillers in the industrial class, designed for continuous, high-performance operation in large meat processing plants, slaughterhouses, delicatessen facilities, and large-scale catering operations. Thanks to the use of a unique dual auger technology (VEMAG Duo-Drive), the raw material is handled extremely gently, which eliminates stress on the meat structure and guarantees a perfect, clear cross-sectional appearance of the finished product. A key advantage of this unit is its integration with a filling chopper. This system allows for simultaneous final comminution of the product to the desired granulation and removal of hard particles (tendons, cartilage) just before the portioning process. The machine performs excellently not only in the production of raw, scalded, or baked sausages, but also in the precise dispensing of meat mixtures, pet food, and other thick food products directly into packaging lines or clipping machines.

Condition: new, power 11 (15) kW (PS) throughput approx. ……………..… 1500 kg/h electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: length 810 mm width 725 mm height 1 570 mm weight 125 kg material 1.4301 / AISI 304 Bodpjb Nvtkefx Aiwsww discharge height 495 mm Scope of supply - installed..... screen 5 mm Scope of supply - included in delivery..... 3 / 8 / 12 mm incl. pouring ring

Condition: good (used), Cutter knife, cutter knife for chop choppers, chop cutter, dicing cutter, multi-purpose cutter, slicer and portion cutter Bedpjvwlvasfx Aiwjww -Manufacturer: Knecht, cutter knife -Type: R350 5 220V 0.R 230 92 -Quantity: 1 knife available -Dimensions: 390/230/H20 mm -Weight: 1.7 kg