Used Chopper chopper for sale (125)

Call

Condition: ready for operation (used), Year of construction: 2000, Seydelmann K75U Ultra Cutter. Stainless steel bowl BJ:2000 2 forward mixing passes and backward mixing pass B7yh2p3h Sale only to tradesmen without warranty without guarantee

more

Listing

D - Hessen

992 km

Gross GAZ 62 / 18,5 kW

Call

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Equipment and technical data: Feed opening: 600 x 800 mm hopper capacity: 0,6 m³ rotor diameter: 252 mm rotor working width: 600 mm rotor speed: 60 100 rpm Cutting system: 14 knives 40 x 40 mm Sieve perforation: 15/20 mm Gllzts Control: electronic via SPS control cabinet: completely wired, incl. 5 m cable motor power: 18,5 kW connected load: 400 V +/- 5% / 50 Hz Suction nozzle-?: 160 mm overall dimensions approx.: L = 1.800 mm, W = 1.230 mm, H = 1.640 mm weight: approx. 1.300 kg incl.: Automatic star-delta automatic stop at idle vibration damping machine feet CE conform Location: Hochheim Availability: Immediately

more

Listing

Meckesheim

1,069 km

PALLMANN PHT 50x1050

Call

Condition: used, For sheeting, tiles, etc. With horizontal infeed Working width 1050 mm, max. infeed height 50 mm Open rotor 600 mm diameter with 4 knives 2 stator knives Jtknayn93 Main motor 75 kW

more

Listing

Sierakowska Huta

1,368 km

Klöckner 120x400 B2WT

€20,205

50 liter lightning chopper

Call

Condition: excellent (used), CATALOG NO. 7102 TECHNICAL DATA Bcpvev9ckg9 - inlet width 400mm - inlet height 180mm - roller width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from below - lower shaft motor 0.75 kW - toothed shaft pulling from above - upper shaft motor 0.75 kW - belt feeder - length of the conveyor belt 3260mm - width of the conveyor belt 400mm - main engine 38kW - autoreverse - diameter of the exhaust connection 250mm - overall dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition Net price: PLN 88900 Net price: EUR 20205 depending on the price of EUR 4.4 (Prices may change with higher volatility)

more

Auction

Nordrhein-Westfalen, Germany

830 km

Flail chopper

Husmann HFG VI

Call

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, TECHNICAL DETAILS Type of drive: Diesel operating hours: 2.600 infeed belt length: 4.700 mm Infeed belt width: 1.700 mm flails: 46 pieces Bgos77xlged flail width: 80 mm EQUIPMENT SCANIA turbo diesel engine with power P = 478 kW Direct drive via 8 V-belts Infeed roller and infeed belt each with a separate drive and gearbox

more

Listing

Hobro

845 km

TALSA K50

€6,500

Roller shredder, shredder, chopper, shredder

Call

total length: 130 cm, total width: 103 cm, total height: 126 cm, Condition: good (used), Year of construction: 2004, Quick chopper 50 litersTALSA. Type K50. Year of manufacture 2004 With mixer gear. Jyhvar8lat 380v, 50hz. 11,00kW, 19,30A. Total dimensions - 130x103x126cm. FAR.23130

more

Listing

Barcelona

1,611 km

Scrap Chopper

GUILLEM 2TR-250

Call

Condition: used, Year of construction: 1979, CONTROLS .. conventional Kz78qtxf0x TECHNICAL SPECIFICATION .. Working length: 250 mm .. plate thickness (max.): 1 mm

more

Listing

Großpösna

1,151 km

Doppstadt INVENTHOR Type 6 DW2268k

€340,000

Call

Condition: reconditioned (used), Year of construction: 2020, Operating hours: 4,950 h, machine/vehicle number: 13, Roller shredder Doppstadt INVENTHOR Type 6 DW 2268K German machine, from own company stock ! 1st hand Year of construction: 04/2020 Operating hours: 4950 hrs. Technically in super condition Bgyrmlyotxo All roller teeth are NEW

more

Listing

Meckesheim

1,069 km

PALLMANN PHT 50x1050

Call

Condition: used, For sheeting, tiles, etc. Cb9p8rc With horizontal infeed Working width 1050 mm, max. infeed height 50 mm Open rotor 600 mm diameter with 4 knives 2 stator knives Main motor 75 kW

more

Listing

Sierakowska Huta

1,368 km

Ferrari

€21,568

Call

Condition: excellent (used), CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - roller width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed pulling shafts from above and below 2×2.2 kW - electric autoreverse - reverse gear - belt feeder Zn8e79r - feeder length 5100mm - width of the conveyor belt 400mm - main engine 30kW - size of the chipper length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight about 3000 kg – with a conveyor belt – electric autoreverse - reverse gear – used chipper, very good condition Net price: PLN 94900 Net price: EUR 21089 depending on the price of EUR 4.5 (Prices may change with higher volatility)

more

Listing

Treffler Striegel Präzisionshackstriegel TS 1220 5tlg

Theresienfeld

1,588 km

Silage chopper

Treffler Striegel Präzisionshackstriegel TS 1220 5tlg

€27,500

Call

Condition: used, Year of construction: 2019, Precision hoeing harrow TS 1220 5 pcs Track to 2.0m Combination spring Tungsten carbide tines Central tine pressure adjustment Glxvs8 Electric depth control

more

Listing

Wiefelstede

(dealership location)

786 km

LGU AL 1017E

€175

Cross Rhino Beet Washer & Chopper

Call

Condition: used, Garden shredders, shredders, shredders -Suitable: for gardens, house, property and landscape maintenance -Chopping, mixing, processing in combined use -Drive: electric motor Brpx83ps -Inlet: Ø 120 mm -Power: 0.9 kW -Speed: 2900 rpm -Weight: 30 kg

more

Listing

Κατερίνη

2,540 km

CROSS Rhino

€70,000

EXW ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2012, Operating hours: 80 h, Functionality: fully functional, CROSS Rhino Machine Beet Washer, De-Stoner & Chopper mainly for beet use. Can also be used for potato cleaning & chopping, or other agroindustrial product. Bii2jqw92gr

more

Listing

Helmond

744 km

Super Chopper SC1412

Eldan SC1412

Call

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 19632, Eldan Super Chopper SC1412T for tyres, cable, wood, plastic or waste Hägglunds NB 400 S N 02 12 heavy duty frame vibrating extractor hopper cabinet very clean machine Bhkwqalnxh

more

Listing

Meckesheim

1,069 km

PALLMANN PHT 50x1050

Call

Condition: used, For sheeting, tiles, etc. With horizontal infeed Lr2cb3crcb Working width 1050 mm, max. infeed height 50 mm Open rotor 600 mm diameter with 4 knives 2 stator knives Main motor 75 kW

more

Listing

Sierakowska Huta

1,368 km

GAZ 102

€27,932

Front stop chopper shears

Call

Condition: excellent (used), Year of construction: 2001, CATALOG NO. 7089 TECHNICAL DATA - inlet of the loading hopper 1020x1230mm - working width of the rotor 1020mm - rotor diameter 348mm - main engine 22kW, 400V, 50Hz - pump motor 0.75 kW - number of knives 50 pcs - knife size 35x35x20mm - 12mm sieve Bbcronyejjn - pressure drawer - electric autoreverse - dimensions length/width/height 2000x1130x1530mm - weight 970 kg ADVANTAGES – autoreverse – like WEIMA WL 10 – German production – pressure drawer - very good condition – used chipper, DTR+CE documentation Net price: PLN 122900 Net price: EUR 27932 depending on the price of EUR 4.4 (Prices may change with higher volatility)

more

Listing

Iserlohn

(dealership location)

860 km

RAS 86.32

Call

Condition: reconditioned (used), Year of construction: 1995, Multicut System 9000 2r8vzmwht year of manufacture: 95/96 max.sheet thickness 6,3 mm cutting length 3190 mm weight 8 to Accessories: complete with front stop and outfeed belt Condition: overhauled (new discharge table, new screen, new safety relays, etc.)

more

Listing

Salzburg

1,412 km

Disc chopper

LINDNER

Call

Condition: good (used), Disc chipper Lindner Infeed width: 35 cm infeed height: 35 cm with drive motor 125 kW with conveyor belt length: 5 meters width: 40 cm good condition - fully functional - immediately available Fzw8yna0 Location: Austria, near Salzburg

more

Listing

Kronoholmsvägen 4, 271 51 Ystad, Sweden

1,087 km

Bowl chopper

Mainca CM-41

Call

Condition: like new (used), Year of construction: 2002, Mainca CM-41 quick chop year mod 2002. 2x speeds on knife shaft & bowl 1500 / 3000 rpm + 10 / 20 rpm. Capacity 24 kg product digital temperature gauge. G0vshov Dimensions 130 x 95 cm H 105 cm.

more

Listing

TBE Habermehl ZH400 Rotorschere Spänebrecher Vorschredder

Gondelsheim

1,081 km

Shredder twin-shaft shredder chopper

TBE Habermehl ZH400 Rotorschere Spänebrecher Vorschredder

€9,850

Call

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: MBUT1-9, Cable shredder Pre-shredder Chip crusher Shredder Two-shaft shredder Rotor shear Rotor knife Chip shredder 5 pieces available! Manufacturer TBE Habermehl TYPE ZH400, BJ 2003 Power 400V 3KW with pumping station, without control The shredder can also be operated separately from the chip conveyor Dimensions complete LxWxH 200x85x120cm (motor), 110x55x31cm LxWxH (shredder), Opening about 45x40cm 8v7jlto Ideal for pre-shredding cables with plugs, plastic, metal, wood etc. Warning - not a toy. The shredder eats almost everything. Very robust engine and transmission Used condition, function flawlessly until dismantling Collection only by appointment in 75053 Gondelsheim Shipping by forwarding agency possible, please inquire with zip code

more

Listing

Meckesheim

1,069 km

PALLMANN PHT 50x1050

Call

Condition: used, For sheeting, tiles, etc. With horizontal infeed Working width 1050 mm, max. infeed height 50 mm Open rotor 600 mm diameter with 4 knives Bh9kvlz0npt 2 stator knives Main motor 75 kW

more

Listing

Pockau-Lengefeld

1,227 km

Chopper knife

€5

Bread Chopper Tekmak Silver

Call

Condition: as good as new (ex-display), Sell 42 pieces of chopper knives in mint condition. Width across flats 24 mm for chipper RSN Price per piece Nqaaru2r

more

Listing

Шабац

2,017 km

Tekmak Silver

€1,700

Bread Chopper Tekmax Platinum

Call

Condition: new, Year of construction: 2023, High quality hand-shredding bread shredder with AVB (Anti Vibration) technology Stainless steel blades Electrostatic color of the exterior Works silently and without vibration W9pc28u7c Capacity: 500 loaves per hour Loaf sizes: 300-3000g There are two color options, black and white Allows easy portability thanks to wheels Automatic stopping of the cutting process Blade numbers: 26, 28 or 32 Single phase motor

more

Listing

Шабац

2,017 km

Tekmak Platinum

€1,650

Call

Condition: new, High quality hand-shredding bread shredder with AVB (Anti Vibration) technology Stainless steel blades Electrostatic color of the exterior Works silently and without vibration Capacity: 500 loaves per hour Loaf sizes: 300-3000g There are two color options, black and white Allows easy portability thanks to wheels H07bun3w Automatic stopping of the cutting process Blade numbers: 26, 28 or 32 Single phase motor

more

Listing

Leeds

214 km

high speed shredder

Doppstadt AK530

€110,000

Call

Condition: good (used), the machine is in overall good condition and ready to work. recent complete engine overhaul . fitted with over and magnet Bhszyj0tzg3

more

Listing

386 Buxton Rd, Stockport SK2 7BY, UK

237 km

wood chipper

Gandini Meccanica CT40/75

€78,100

Call

Condition: used, Year of construction: 2019, Gandini Meccanica CT40/75 Wood Chipper. Immediate availability, new machine with demo hours only. Bteb8bfezc Coming with 2 screens and remote control PTO driven Immaculate condition, can be seen working For more information or to arrange a viewing, please get in touch.

more

Listing

Luttenberg

722 km

John Deere 7280 + 630b graspickup

€72,500

Call

Condition: used, Year of construction: 2013, Field of application: Agriculture Bh9fwdtqqkf Please contact MICHIEL TIJS for more information JOHN DEERE 7280 chopper - cage hours; 2149 - engine hours; 2964 -wd; 2 - front tires; Michelin 800/65x32 - rear tires Michelin 480/80x26 - Air conditioning; Yes - knives; 48 - gear box; mechanical 3 gear 30 km - additional; automatic lubrication - additional; reversing camera - additional; camera in the blowpipe - additional; metal detector - additional; corncracker - additional; hectare counter - additional; central lubrication - transport length; 6.62 - transport width; 2.95 - transport height; 3.70 - weight; 11280 kg - horsepower; 450 JOHN DEERE 630B grass pickup - working width 3 m - little used = Dealer information = Wij kunnen eventueel transport, verscheping en douanedocumenten voor u regelen.

more

Listing

Wiefelstede

785 km

Braking device

HuK frenotron-se

€80

Sudhausbau 5 HL Brewhouse (2016)

Call

Condition: used, DC brake, braking device, electric motor brake, brake module, brake unit, brake chopper -Manufacturer: HuK Hilger u. Kern, Statomat brake device frenotron-se unused in original packaging -Motor power: max. 3.5 kW -Techn. Data: see photo -Quantity: 2x power supply available -Price per piece -Dimensions: 100/70/H110 mm -Weight: 0.4 kg 0l0obld

more

Listing

Greentech Greentec 942/16 Hackerkombination rückwä

Drachten

672 km

Wood shredder

Greentech Greentec 942/16 Hackerkombination rückwä

Call

Condition: new, machine/vehicle number: Greentec 942/16 Hackerkombination rückwärts kippend, Greentec 942/16 chipper combination tilting backwards Standard model equipped with Standard GCS (Greentec Control System) Combination ejection shaft, hydraulically up/down, hydraulically adjustable ejection flap Sturdy, hydraulically folding feed table for multiple positions Maximum ejection thanks to Venturi ejection tower Hydraulic brake Maximum ejection thanks to Venturi ejection tower. Upper feed roller is driven by an integrated heavy-duty motor (Poclain wheel motor). Counter blade is mounted with screws and can be easily replaced. Standard GCS (Greentec Control System) Optional extras Remote control for chopper Hydraulically tiltable Venturi tower Electric 12 V starting aid including cable set Crane control Chassis air brake system (dual-circuit) instead of hydraulic brakes Various lighting kits and outriggers Versions With 2 or 4 feed rollers Standard or Bigfoot Features Chopper Venturi airflow cooled hydraulic system. Newly developed rotor housing with ejector has a replaceable wear plate (Hardox). Maximum ejection thanks to Venturi tower. Simple machine principle, chop at the front, eject at the rear. An additional system with screw conveyor and ejector wheel is not necessary. Prevents additional wear, saves energy and therefore fuel, resulting in a higher yield. The Greentec drum chippers stand for uniform wood chips with a limited proportion of fines. Chipper drum 3 cutting knives distributed around the drum. Counter blade is mounted with screws and can be easily replaced. Cutting blades distributed around the drum, with fan blades on both sides of the drum. Due to the special design of the counter blade, fine branches are cut at a better angle, which ensures a better cutting quality. Feed Extra low feed facilitates feeding of large material (lower than lower feed roller). Each upper feed roller is driven by an integrated heavy-duty motor (Poclain wheel motor) (maintenance-free), therefore no side slots from which wood chips could escape. Lower feed roller has a single-sided drive (heavy-duty hydraulic motor with oil-lubricated bearings [maintenance-free]). Quality All machines are made of high quality steel S52.3. The claws on the rollers are made of HARDOX steel, guaranteeing a long service life. The ejector has a replaceable wear plate (Hardox) After sandblasting, the machines are powder-coated in 2 layers. Bearings, hydraulic control valves, motors & pumps are of heavy-duty quality on all machines. Technical data Feed size 2 feed rollers: 520 x 710 mm Hztqbjwrf 4 feed rollers: 520 x 1060 mm Feed channel size 450 x 710 mm Max. Diameter input hard wood Ø 300 mm Max. Diameter input soft wood Ø 420 mm Drum size 960 x 730 mm Diameter of top feed rollers (double) Ø 430 x 710 mm Diameter of bottom feed rollers Ø 300 x 710 mm Diameter of feed roller left and right (STI) 4 feed rollers: Ø 300 x 610 mm Number of knives 3 Number of counter knives 1

more

Listing

Menslage

(dealership location)

797 km

Sudhausbau Sudhaus

Call

Condition: used, Year of construction: 2016, Overview This complete brewhouse was manufactured in 2016 by the German manufacturer Sudhausbau. The plant can be visited and tested at any time, as everything is still connected and in operation. Components Grist mill 1 piece grist mill 2 foot stands with rubber bumpers 1 additional larger hopper Throughput up to 200 Kg/h Brewhouse in stainless steel Cast wort/ brew 2 units steam heated Control system with automatic mashing Switch and control cabinet Completely wired and ready for connection Control cabinet assembly with: 1 x control via touch screen Siemens 9" 1 x contactor circuit 0,37 KW agitator 1 x contactor circuit 0,37 KW chipper 1 x contactor circuit 230V/16A steam valve 2 x 24VDC outlet temperature sensor 2 x temperature measurement Analog input 4-20 Hardware and software The control unit with automatic mashing is designed for the connection of the agitator, chopper and 2 temperature sensors Wort boiling also runs automatically via the control system The pump and the agitator are frequency controlled Steam generator 1 piece electr. steam generator Operating pressure: max. 5 BAR heating capacity: 45 kW / h Voltage: 400 V / 3 / 50hz / PE Steam output: approx. 60 kg / h Water treatment for steam generator 1 piece water treatment and softening Fermentation cellar 2 pieces open fermentation vats 10 hl (year of construction 2015) Round design, with cooling stand on standard feet The vats are equipped with lid and spray ball for cleaning Net capacity: 10,0 hl Capacity gross: 13,0 hl Cooling 1 cooling zones on the jacket each 1.6 m2 Equipment Temperature sensor for cooling control Tap for sampling Inlet/outlet DN25 with disc valve Storage cellar 3 pcs. storage tank 10 hl (horizontal, without cooling and insulation) Content net: 10,0 hl Capacity gross: 11,0 hl 2 pcs. storage tank 5 hl (lying, without cooling and insulation) Content net: 5,0 hl Capacity gross: 6,0 hl Water treatment 1 hot water tank Volume 700 l, unpressurized Insulation 70 mm by mineral wool and covered with stainless steel 1 screw-in heater to keep the water at temperature 1 cold water tank Volume 700 l, unpressurized Insulation 70 mm by mineral wool and clad with stainless steel The cold water tank is cooled by the offered refrigeration unit Refrigeration control 1 piece cooling unit 3 pieces single tank control / temperature controller Ready-made control unit for Tank and direct connection with the cooling circuit With solenoid valve, strainer and thermal sensor ready for immediate use Connection 1⁄2" Centrifugal pump 1 mobile single-stage centrifugal pump on mobile frame WITHOUT hood 2 pieces of beer hose in DN 25 Semi-automatic KEG cleaning system 1 piece semi-automatic KEG-cleaning unit Type: BabyKEG Capacity: 20 KEG/h SPS and control panel Co2 valve for preloading KEG residual pressure test Insulated detergent tank with electric heater Bdyoqoxj0pi

more

Listing

Boekel

(dealership location)

734 km

John Deere 7750I

€58,500

Call

Condition: good (used), Year of construction: 2012, Operating hours: 2,943 h, John Deere 7750I Year of construction 2012 ProDrive Engine hours 4428 Drum hours 2943 Driving speed (km/h) 40 4-wheel drive Engine power 458 kW (623 PS) Front tires: 800/65R32 Rear tires: 480/80R26 Automatic lubrication Air conditioning Air compressor On-board computer Metal detector Extra weights T8k7zkvg

more

Listing

Meerhout

738 km

Mixer granulator

GEA Collette GRAL 300

€28,000

Call

Condition: excellent (used), Model Gral 300 Total contents 300 litre Jacketed bowl with trolley Useful contents 1/2 tot 2/3 Power of mixer motor 16 -24 kW- double speed Rotation speed mixer arm I speed : 120 - II speed : 185 rpm Power of chopper motor 7- 9 kW – double speed dahlander Rotation speed chopper arm I speed : 1297 - II speed : 2524 rpm Hydraulic motor 1,5 kW Bowl Doubel wall jackted suited for heating and cooling Dimensions Height 2.900 mm Depth 1.600 mm (without valve) Fwztltiga Width 1200 mm ALL PRODUCT CONTACT PARTS AISI 316

more

Listing

Luttenberg

722 km

John Deere 7450+ KEMPER 360 plus

€115,000

Greentec Cheetah 30 crane input

Call

Condition: used, Year of construction: 2011, Field of application: Agriculture Please contact MICHIEL TIJS for more information JOHN DEERE 7450 + KEMPER 360 plus corn head - cage hours; 2032 - engine hours; 3035 - front tires; Michelin 800/65x32 - rear tires; Michelin 580/70x26 - cutterhead; 48 - knives; new - Air conditioning; Yes - gear box; mechanical 3 gear - speed; 30 km -wd; 4 - horsepower; 560 - additional; metal detector - additional; corncracker - additional; Greenstar ready - additional; hectare counter - additional; central lubrication - additional; automatic grinding device - transport length; 6.62 - transport width; 3.45 - transport height: 3.70 - weight; 12.2 tons - recent major maintenance worth € 13,000 + Kemper M 360 Plus maize header - bj; 2016 - 700 hectares mowed - wide; 8 row - additional; pendulum attachment - additional; road protection, - extra: 2-speed gearbox = Dealer information = Wij kunnen eventueel transport, verscheping en douanedocumenten voor u regelen. F3khkohsc

more

Listing

Deutschland

1,034 km

Brochure production

MKW RAPID 30-UT10-GS-AW-HV -A4 quer

Call

Condition: used, Year of construction: 2008, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: MKW RAPID 30-UT10-GS-AW-HV -A4 quer Collator 1st machine: Calendar Collating Machine - Type: Belt conveyor table - Format: max. 35,0 x 70,0 (A4 quer); min. 10x14cm - Material thickness: 14 - 1.000 g/qm - Stations: 10 stations - 1 hand feeding station left - Stack height: max. 70 cm - Station handling: Dynamic station selection for optimized job preloading - Automatic switching on/off of selected stations - Inserting-function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Tandem function: Tandem-Funktion 2:1 - Control: Electronic machine control by IPC - 12,1 Zoll colour display (TFT) for reliable and clear operation - Controls: Self-measuring double-sheet control per station - Missing- and double-sheet control parametrizable by terminal - Automatic repetition in case of missing sheet Dlx2ur - Counter: Preset counter for intermediate stop, number of sets and stop time - Edition counter with automatic empty travels of the transport table - Total counter, service counter, special counters - Blast air: Height-adjustable side blowers with adjustable blowing air - Air blast mechanism with dosing automatic front blowers - Delivery: Integrated delivery jogger system with jogger S3 - Delivery control system for criss-cross delivery with adjustable set interval - Shaker bridge for transfer to stitch-fold unit - Speed: Up to 2,700 cycles / h, (depending on format and paper) - Speed display infinitely variable 2nd machine: Stitching-folding-cutting unit - MKW SFT 350 - (A4 landscape) - Format: Open format 10 x 14 cm to 35 x 64 cm for brochures - Open format or head stitching to 35 x 50 cm - Equipment: Text display for operation and monitoring - Motorized quick format adjustment for paper guidance - Motorized fast-format-adjustment for machine frame - Stitching extendable to 6 stitcher heads for spine stitching - 2 Hohner stitching heads - Single chopper fold with adjustable folding rollers - Adjustable folding rollers with pressing mechanism - Adjustable pressing mechanism by rollers - Front trimming unit with 6,0 cm minimum size by upper and lower knifes - Jam control unit safeguarding the trimming unit - High endurance of knifes by DURITAN®-knifes - Delivery: Brochure delivery with electronic adjustable stack separation - Speed: Up to 4,000 cycles / h, (depending on format and paper) - Condition: As is - Power supply: This machine is connected to 380 -400 V, 50 Hz. - Important: Connection requirements of any power utility note! - CE mark: The machine bears the CE mark - Status: In production - Test: By prior appointment agreement possible - Location: Germany - Availability: Directly We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

more

Listing

Greentec Greentec Cheetah 30 Kraneingabe

Drachten

672 km

Greentec Greentec Cheetah 30 Kraneingabe

Call

overall weight: 2,230 kg, total width: 220 cm, total length: 200 cm, total height: 335 cm, Condition: new, machine/vehicle number: Greentec Cheetah 30 Kraneingabe, Functionality: fully functional, Hydraulic system is cooled via ejection air flow Better/easier intake thanks to inclined intake angle Conically milled chopping disk (between the cutting knives) reduces friction & increases the feed speed. All machines are made from high quality S52.3 steel. Easy maintenance Standard model equipped with Bikf39kgvqb Remote control with cable in the cab Discharge chute with large radius suitable for 5 meter long pipe (UG0078388), hydraulically rotatable from tractor Manual discharge flap GT930-SH PTO shaft Three-point linkage as standard LED vehicle lighting Versions Front and rear version With 2 or 3 knives Special equipment Radio control 5m long discharge chute above the cab Electric operation of the discharge flap PTO shaft with freewheel Three-point hitch suitable for mounting Mowi, TG or Nokka timber crane instead of standard three-point hitch Crane operation Hydraulic opening of feed rollers Headlight Trailer coupling Single-acting hydraulic connection Optional color Features Chopper Hydraulic system is cooled via ejection air flow 2 very aggressive vertical feed rollers (1 drive motor per roller) Infeed equipped with counter blades on 3 sides. (exact settings even after many machine hours) Better/easier intake thanks to inclined intake angle Chipper disk Conically milled chopping disk (between the cutting knives) reduces friction & increases the feed speed. Quality All machines are constructed from high-quality S52.3 steel. HARDOX wear plates in the tower & chipper unit. After sandblasting, the machines are powder-coated in 2 layers. Bearings, hydraulic control valves, motors & pumps on all machines in heavy-duty quality. Maintenance Cutting blades easily accessible without removing the fan blades. Chipper disk can be easily locked with a pin. Additional protective cover over the drive of the feed rollers, all lubrication points easily accessible Adjustable counter blade, can be used on 2 sides Technical data Feed size (mm): 300 x 580 Feed channel size (mm): 300 x 320 Chopping disk (mm): Ø 960 x 58 Number of counter blades: 3 Max. Chipping length (mm): 22 Drive system 3 knives: PTO shaft 1000 rpm 2 knives: PTO shaft 1000 rpm Infinitely adjustable feed speed 3 knives: up to 1 m/s 2 knives: up to 60 m3/hour Capacity up to 3 knives: up to 80 m3/hour 2 knives: up to 60 m3/hour Required capacity 3 knives: from 100-250 HP 2 knives: from 100-200 HP Hydraulically folding feed hopper, with protected hydraulic cylinders. With unique slotted floor: sand, soil and gravel fall through and the knives are less stressed, resulting in longer service life. Front and rear versions

more

Listing

Bremen

847 km

Universal mixer V 10

Diosna V 10

Call

Condition: used, Year of construction: 1985, The DIOSNA universal mixer with the type designation V 10 is a mixer with a fixed vessel with a vertical axis and a mixing tool running relatively slowly in it. The V10 mixer has an exceptionally wide range of applications. It is used for intensive mixing, dispersing, wetting and moist granulating of powdery to coarse-grained as well as flowable materials. Volume: 10 liters Drive: Power 0,55/0,75 KW Rotor speed: 1500/3000 rpm. Chopper: Power 1,5 KW Speed: 3000 rpm Bgb29h2iacn Extensive technical documentation available.

more

Listing

Boekel

(dealership location)

734 km

New Holland FR700

€128,000

MG Cable Granulator Type MG-380VZT

Call

Condition: good (used), Year of construction: 2013, Operating hours: 3,612 h, Front tyre size: 800/75R32 Rear tyre size: 600/65R28 Top speed: 40 km/h New Holland FR 700 2013 3610 drum hours FR700 Engine Caterpillar C18 700 HP 2 x 16 blades drum HD wear plates 4WD HWC 40KM Differential lock Power Cruise™ II System HydroLoc™ dual drive Mechanical lateral flotation IntelliView™ IV monitor automatic lubrication Tires 800/75R32 & 600/65R28 Heavy Duty Cracker Roll Diameter 250 /99-126T/CR/HYDR 30% S8amj We take care of export papers, and ship machines to your nearest port on request.

more

Listing

Helmond

744 km

MG Recycling 380VZT

Call

Condition: good (used), Year of construction: 2020, Complete cable granulation system consisting out of: - 75 kW Single shaft pre-chopper; - Overbelt-magnet; Cxalufoaex - Loading belt with material hopper and magnetic pulley; - MG-380VZT Compact cable granulation plant;

more

Listing

John Deere 7450 + KEMPER 360 plus maisbek

Luttenberg

722 km

John Deere 7450 + KEMPER 360 plus maisbek

€95,000

Chipping truck with crane

Call

Condition: used, Year of construction: 2011, Field of application: Agriculture Empty weight: 12.200 kg Top speed: 30 km/h Tyre brand: Michellin Front tyre size: Michellin 580/70x26 Rear tyre size: Michelllin 800/65x32 Cudrzpbh Please contact MICHIEL TIJS for more information JOHN DEERE 7450 - cage hours; 2032 - engine hours; 3035 - front tires; Michelin 800/65x32 - rear tires; Michelin 580/70x26 - cutterhead; 48 - knives; new - Air conditioning; Yes - gear box; mechanical 3 gear - speed; 30 km -wd; 4 - horsepower; 560 - additional; metal detector - additional; corncracker - additional; Greenstar ready - additional; hectare counter - additional; central lubrication - additional; automatic grinding device - transport length; 6.62 - transport width; 3.45 - transport height: 3.70 - weight; 12.2 tons - recent major maintenance worth € 13,000 + KEMPER 360 plus - 8 row corn head - Height: 1.60 m - Total width: 6.05 m - Height: 1.40 (2.30) m - Working width: 6.00 m - Transport width: 3.00 m - Weight: 2,535 kg = Dealer information = Wij kunnen eventueel transport, verscheping en douanedocumenten voor u regelen.

more

Listing

Sankt Urban

1,196 km

Drum chipper

Rudnick & Enners TH 150/650/3

Call

Condition: excellent (used), On offer: A drum chopper Brand: Rudnick & Enners Type: TH 150/650/3 Year of construction: 1991 Engine power: 22 kW Operating current: 380/660 Volt Speed: 1470 rpm Vibrating feeder: Motor power: 4 kW Feed opening: 650 x 150 mm The drum chipper is sold together with the vibrating chute. Juoxkb93c The complete system has been dismantled and is available immediately.

more

Listing

386 Buxton Rd, Stockport SK2 7BY, UK

237 km

Jenz Chipping Truck

€370,000

John Deere 300F transport wiel

Call

Condition: excellent (used), Year of construction: 2017, For sale Jenz Chipping truck 583 with mounted Palfinger crane. 2017 machine with only 3500 chipping and crane hours. MAN Truck with 61937km powering the Crain and blower units. The chipping unit is power buy its own 540hp engine. Coming with it own log and splitter, with 8 x 8 wheel drive this is a highly versatile high volume machine, For more information or two arrange a viewing please get in touch Kj0zeoix

more

Listing

Babenhausen

1,030 km

Dough sheeter

Seewer Rondo SFE 6605

Call

Condition: reconditioned (used), Unwinder Model: Rondo SFE 6605 computer control / touch panel for all doughs for rolling out and touring stainless steel version rolling thickness from 45 to 0,2 mm electric chopper up to 635 mm product width with new scrapers and new belts DGUV V3 tested machine mobile with brake connection 400V,1,1 kW, 16A-CEE plug second hand machine cleaned and tested Bgk0fbcio2i More TOP bakery machines and equipment immediately in stock

more

Listing

Boekel

(dealership location)

734 km

€1,500

Long grass conveyor belt, 12300 mm

Call

Condition: used, Attachment suited for: Agricultural machines John Deere 300F Transport wheel Year of construction 2011 Weight (kg) 300 Rgyrv max. load(kg) 2000

more

Listing

Horst

861 km

Call

Condition: ready for operation (used), Long grass metering conveyor in industrial design, with stone separator, ideal as feeder belt for silage chopper or for conveying hay. Very stable and efficient, thanks to annual maintenance. L/W/H = 12300 mm x 2500 mm x 4550 mm 1.5 kW from Bauknecht 3.0 KW from SEW Eurodrive Yzxiruwj 2.5 KW from Bockwoldt/Oldisloe

more

Listing

Luttenberg

722 km

John Deere 7280 + KEMPER 360 plus

€82,500

Call

Condition: used, Year of construction: 2013, Operating hours: 2,149 h, Field of application: Agriculture Power: 331 kW (450 HP) Empty weight: 11.280 kg Front tyre size: michellin 800/65x32 Rear tyre size: michellin 480/80x26 Please contact MICHIEL TIJS for more information JOHN DEERE 7280 chopper - cage hours; 2149 - engine hours; 2964 -wd; 2 - front tires; Michelin 800/65x32 - rear tires Michelin 480/80x26 - Air conditioning; Yes - knives; 48 - gear box; mechanical 3 gear 30 km - additional; automatic lubrication - additional; reversing camera - additional; camera in the blowpipe - additional; metal detector - additional; corncracker - additional; hectare counter - additional; central lubrication - transport length; 6.62 - transport width; 2.95 - transport height; 3.70 - weight; 11280 kg - horsepower; 450 + Bgx2vzget8m KEMPER 360 plus - 8 row corn head - Height: 1.60 m - Total width: 6.05 m - Height: 1.40 (2.30) m - Working width: 6.00 m - Transport width: 3.00 m - Weight: 2,535 kg = Dealer information = Wij kunnen eventueel transport, verscheping en douanedocumenten voor u regelen.

more

Listing

386 Buxton Rd, Stockport SK2 7BY, UK

237 km

Wood Chipper

Jenz 820 with mounted crane

€226,500

Call

Condition: like new (used), Year of construction: 2014, For Sale 2014 Jenz 820 with Epsilon 130 crane and log grab fitted and XL Cab. Cat C18 engine Machine is great working order, Can be seen working in Ireland. Cer2cmrson

more

Listing

Boekel

(dealership location)

734 km

New Holland FR550

Call

Condition: excellent (used), Year of construction: 2022, Operating hours: 157 h, AdBlue system: Yes Make axles: Trelleborg Front tyre size: 710/70R42 Rear tyre size: 540/65R30 Power: 400 kW (544 HP) Top speed: 40 km/h Number of rows: 8 New Holland FR550 60th Anniversary Demo Year of construction 2022 Max power KW/HP 400/544 Dual drive 2×10 drum Grain processor gk 250/126T/hyd /30 %ff 4WD diff lock, 40KM/H Tires 540/65R30 & 710/70R42 Luxury cabin with Climate control ATC Assembly tools LED lighting, camera, Radio, luxury air suspension seat Automatic lubrication Bumper FF with weights New Holland 8 row maize header 60SFIE with autopilot Machine is like new Csglw0prrm

more

Listing

Luttenberg

722 km

Zurn Proficut 620

ZURN Proficut 620

€42,500

Call

Condition: used, Field of application: Agriculture Please contact MICHIEL TIJS for more information ZURN Proficut 620 mowing deck - suitable for New Holland chopper - working width; 6.20 m - cutting height; 5-15 cm - mowing discs; 2x8 - knives; 32 - working speed; 6 hectares/per hour - required horsepower; 100 / 74 kW - weight; 3050 kg - transport trolley; Yes - speed; 40 km by road transportation - crops; grains, grass, clover, alfalfa, sunflower etc. - robust construction header for powerful forage harvester. = Dealer information = Be2ymcriedc Wij kunnen eventueel transport, verscheping en douanedocumenten voor u regelen.

more

Listing

Boekel

(dealership location)

734 km

John Deere 7780i ProDrive

€99,800

Call

Condition: good (used), Year of construction: 2014, Operating hours: 3,711 h, Front tyre size: 800/65R32 Rear tyre size: 600/65R28 Power: 458 kW (623 HP) Number of cylinders: 6 Engine capacity: 13.500 cc Top speed: 40 km/h Number of rows: 10 Drum hours / Seperator hours: 2500 John Deere 7780i Forage Harvester Year of construction 2014 Engine hours 3711 Chopping hours 2500 Maximum power (kW/hp) 458/623 Cem7lupq Maximum speed 40 km/h Number of knives 56 Front tires 800/65R32 Rear tires 600/65R28 ProDrive transmission Four wheel drive Metal detector Air conditioning Central lubrication system 10 row Kemper Corn Head 375 plus

more

Listing

Luttenberg

722 km

Kemper plus 360 - 8 rij

€25,000