Used Felder Bf6-41 for sale (122)

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 605.03.018.23, cutting length (max.): 3,200 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 133 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, type of input current: three-phase, input voltage: 400 V, warranty duration: 24 months, power: 7.3 kW (9.93 HP), Equipment: motor brake, rotational speed infinitely variable, I am selling our Kappa 400 sliding table saw from Felder in Austria. The machine was delivered to us last year in March 2023. Prodpeu S Ipaofx Ah Aoc For operational and above all space reasons, the machine was never set up. We ordered the machine from Felder in the middle of 2022 with a few extras. I have photographed the invoice with the product details. As the machine is still in its original packaging, it is therefore available for immediate delivery or collection. The invoice after delivery amounted to EUR 17,378.00 net. The machine comes with two new saw blades.

Condition: used, machine/vehicle number: 008185, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Predpjxauduefx Ah Asc Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr

Condition: like new (used), Year of construction: 2023, functionality: limited functionality, Circular saw Manufacturer: Felder Type: K 740 S Year of construction: 2023 Carriage length: 2.800 mm Cutting width: 1,250 mm Cutting height: 140 mm Power: 7.2 kW Speed: 4,000 rpm Scorer: Yes Motor brake: Yes Height and angle adjustment: Electric Podeun Rhrepfx Ah Ajrc

Condition: excellent (used), Year of construction: 2017, Format circular saw Kappa 550 e-motion (Formatkreissäge) - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scorer operational display - Crosscut fence 3200 mm, swivels 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Position-controlled rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard: hood for 90° cuts and for angled cuts, height-adjustable and pivotable out of the working area - e-motion control: 15" color touchscreen, operator panel at eye level, USB interface and prepared for network connection, adjustable and pivotable out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Podpfx Aew Tfahsh Aorc - Scorer operational display - Total operating hours: 443.47 h - Comes with many almost new saw blades and groove cutter blade

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Prsdpfjxd Aitjx Ah Aoc Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: used, Year of construction: 2022, machine/vehicle number: 230.08.007.2, Laufrichtung der Platte : von Bediener nach links Pjdpfow Naf Rsx Ah Aorc max. Anleimerstärke : 3 mm min. Werkstückdicke : 8 mm max. Werkstückdicke : 45 mm min. Werkstücklänge : 140 mm Vorschubgeschwindigkeit : 9 m/min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Durchmesser: 80 mm Höhe: 49 mm Verstellung des Einlauflineals : manuell Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar + zusätzl. Leimbecken Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Profilziehklinge : pneumatisch zustellbar Flachziehklinge : Ja Schwabbelaggregat : Ja Sprüheinrichtung : Trennmittel/Reinigungsmittel Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 14,5 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Prodpfx Ajrubg Hsh Asc

Condition: used, Year of construction: 2011, For sale: CNC machining centre profit H20 Format-4 Felder - year 2011. The machine is in continuous operation and can currently be inspected under power! 3-axis centre with preparation for a 4th axis. Working area 1250x3150mm, Z height=100mm, possibility to work on two separate working zones. In 2024, the electrospindle was refurbished. All repairs and maintenance carried out by a qualified service provider. Loading is provided. Transport is the responsibility of the buyer – flatbed truck with a bed length of 7-8m required. Requirements to connect the machine: - Electric cable 5x4mm2 with a plug compatible with workshop sockets - Electrical protection (at least) 32A industrial, matched to motor power. General rule: rated current indicated on the machine (nameplate) +40% - Pneumatic connection, internal diameter at least 12mm - Compressor with capacity of at least 100l/min - Extraction/aspiration system VAT invoice provided. Pedsxg Ehdepfx Ah Aorc Price shown is net. For any questions please contact us by phone or email.

Condition: ready for operation (used), Year of construction: 2020, This FELDER G480 edgebander was manufactured in 2020. It features a feed speed of 9 m/min, tool diameter of 80 mm, and can handle panel thicknesses from 8 to 45 mm. The machine includes a premilling unit with a speed of 12,000 rpm and power of 2 × 1.1 kW, ensuring precise edge preparation. Additional features include a guillotine, pressure rollers, scoring cutters, a flat scraper, and a polishing unit. Contact us for more information about this machine. Application Types Edge Banding Predpfxoxd H T Ae Ah Ajc

Condition: excellent (used), Panel saw Felder Format 4 Kappa 550 Sliding table 280 cm, Main motor 7.35 kW, Cutting width right side 1250 mm, Scoring unit motorized, adjustable on three axes, Motorized rise/fall and tilt adjustment, Max blade diameter 500 mm, Can cut panels up to 280 cm. Podpfxsxgtf Ds Ah Asrc

Condition: like new (used), Year of construction: 2024, Demonstration machine For sale is our Felder RL-300 clean air extraction unit from our showroom, with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has been inspected and serviced by our technical staff. Prjdpfx Ahoxdlwms Ajc Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air unit is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Podpowi Uftsfx Ah Asrc Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Year of construction: 1992, condition: good (used), Vertical bandsaw Manufacturer: verm. fields Year of manufacture: 1992 Type / Model: FBV 400 (?) Machine number: 62 Table: 780 x 600 mm Table inclination: Projection: 430 mm Roller diameter: 420 mm passage height: 260 mm Saw band: mm Prodpfeh S Dmfjx Ah Asc Band speed: 0 to 180 m/min Connection: Accessories/equipment: Band welder Condition: good Weight: 0,7 t Footprint: 830 x 930 mm Dimensions: 1.100 x 1.100 x 2.100 mm Unfortunately, the exact specifications are not recognizable and there is no documentation included.

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Prjdpfow I H Rkex Ah Asc Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: like new (used), functionality: fully functional, type of input current: three-phase, Dust Extractor RL 350 3 x 400V 50Hz 15HP 11kW | Power and speed adjustment through pressure measurement | Powder extinguisher instead of water extinguisher • Max. air flow rate: 8000 m³/h Pedpfxexm Swfj Ah Ajrc • Nominal air flow rate: 20 m/sec, 6920 m³/h • Vacuum: 2630 Pa • Filter (surface) area: 71 m² • Extraction port diameter: 350 mm • Remaining dust concentration, returned airflow quality:

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Variable speed control, 7.3 kW motor, Pedpjxdmu Tefx Ah Ajrc Machine in very good condition.

Condition: as good as new (ex-display), Exhibition machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 4,000 m³/h. The extraction unit is in mint condition and has been inspected and serviced by our qualified personnel. Technical data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction can be installed on right or left side Pedpfxexdkzqo Ah Aerc - Manual chip shaker - Steel impeller - Max. air flow: 4,000 m³/h - Minimal space required: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2018, Edge bander Manufacturer: Felder Type: G360 Year of manufacture: 2018 Operating hours: approx. 1,288 h Edge thickness: 0.4 - 3 mm Pedpfswrqk Djx Ah Asrc Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total power: 5.5 kW Total length: approx. 3,200 mm Jointing unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 320.03.003.13, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 11 kVA, torque: 4 Nm, controller manufacturer: WoodFlash CAD, H10 CNC Control, controller model: H10 CNC Control, Windows 10, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 3,800 kg, spindle motor power: 10,000 W, number of spindles: 1, number of slots in tool magazine: 8, tool length: 300 mm, tool diameter: 180 mm, tool weight: 1,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510 Prjdpfx Asw Tkm Tjh Aec

Condition: good (used), Year of construction: 2005, functionality: fully functional, number of planer blades: 4, power: 7.5 kW (10.20 HP), blade shaft diameter: 120 mm, table width: 510 mm, Equipment: motor brake, The planer is in very good condition, has always been reliable and has run well. Thanks to the parallel fence, it is very space-saving! The planer knife guard is included! Predpfx Aoxdhifjh Ajc

Condition: used, functionality: fully functional, type of input current: three-phase, Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has very low working hours. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters Predpfsxm Suwex Ah Aec - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW The clean air unit is located in Estonia and can be inspected at any time during our business hours. Related terms: extraction, extraction unit, clean air unit, clean air, RL

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 15 m/min, feed length X-axis: 25 mm, feed length Y-axis: 25 mm, feed length Z-axis: 15 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 12 kVA, controller manufacturer: FELDER / FORMAT-4, controller model: Woodflash Control, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, total length: 4,000 mm, total width: 2,300 mm, overall weight: 2,460 kg, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 100 h, spindle motor power: 10,000 W, spindle mount: MK 6, number of spindles: 1, number of slots in tool magazine: 8, tool diameter: 100 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We are selling a complete production package consisting of a high-precision CNC machining center Format-4 profit H08 13.25 P and the powerful clean air extraction unit Felder RL 250. Ideal for processing solid wood, panel materials, and plastics. Prodpfxsw I Sfao Ah Asc

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Podpfxexdkw Es Ah Aerc Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm Prodsxly I Aspfx Ah Aec - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,213 h, functionality: fully functional, machine/vehicle number: 302.09.016.16, travel distance X-axis: 4,010 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of slots in tool magazine: 18, saw blade diameter: 350 mm, TECHNICAL DETAILS Number of axes: 5 Table dimensions (L × W): 5,000 × 1,550 mm X-axis working area: 4,010 mm Y-axis working area: 1,970 mm Z-axis working area: 455 mm Travel speeds X-axis travel speed: 70 m/min Y-axis travel speed: 70 m/min Z-axis travel speed: 23 m/min Tool and saw unit Tool changer: 18 positions Saw blade diameter: 350 mm Extraction and vacuum Vacuum pump capacity: 90 m³/h Extraction connection diameter: 300 mm Extraction capacity: 5,100 m³/h MACHINE DETAILS Operating hours: 5,213 h Voltage: 400 V Current consumption: 46 A Air pressure: 8 bar Machine weight: 4,100 kg EQUIPMENT - Wood Flash software - 3D simulator included - Documentation available Prodpfjwkq Tpjx Ah Aoc - CE marking present - Note: Vacuum pump bearings must be replaced