Used Felder G 560 for sale (127)

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Gbjdpfxjzzcc Ie Al Sju Excellent condition

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Gbodpjzq Dcuefx Al Ssu Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Gbodezx Szujpfx Al Seu Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper Gbsdpfxow I H Rke Al Seu With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Gbedpfxeyfvhao Al Ssu Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Gedpfxsyf I T Ue Al Ssbu Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL) Gsdsng H Uvopfx Al Ssbu

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Prices subject to change, errors, printing and typesetting errors reserved Gjdjvw Ectopfx Al Sjbu

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Current consumption: 18.6 A CE marking: Yes Equipment: Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Gbodjz Arwqspfx Al Seu Scraper blades Polishing unit Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank Gedpfx Alow H Rzxj Sjbu – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Prices subject to change, errors, printing and typesetting errors reserved Gjdpfxsvw Ebpo Al Sebu

Condition: used, functionality: fully functional, – Austrian manufacture – DTR (technical documentation) included – not repainted – compact design – occupies very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – workpiece thickness: 10–50 mm – feed speed: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – workpiece support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic glue temperature control: 20–250°C – compressed air pressure: 6 bar Gjdpew H Rrwefx Al Sebu EQUIPMENT: – feed plate – tape feeder – guillotine for pre-cutting – glue applicator – 3 pressure rollers – guillotine for front/rear tape cutting – 2 milling units: top/bottom – dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Godpfjzvh Dyox Al Ssbu Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo). Gbedpfjz H Sbbjx Al Sou

Condition: good (used), Year of construction: 2016, functionality: fully functional, input voltage: 240 V, year of last overhaul: 2026, Equipment: CE marking, Machine in excellent condition Gsdpfxjzzmfyo Al Sebu

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 Gjdpfx Aloz Nwa Nj Sebu - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Gjdjwzzfkepfx Al Sobu Subject to price changes, errors, and misprints.

Condition: used, Year of construction: 2014, The machine will be in operation at the customer’s site until approximately mid-November and can be demonstrated under power until that time. Gbodpfx Alsz Hazvs Seu Pricing: plus statutory VAT, EXW, unloaded (only the machine itself). Used edge banding machine Format 4 Perfect 710E Year of manufacture: 2014 Including: - e-Motion control system - Trimming unit with touch-controlled edge trimming cutters, 1.1 kW, max. chip removal 3 mm - Release agent spraying system - Pneumatically controlled, Teflon-coated gluing unit for 1.5 kg EVA, also suitable for PIR adhesives - Infrared heating lamp for preheating - Miter saw unit e-motion with 2 motors, 0.75 kW, pneumatically controlled - Combination milling unit, flush and radius milling unit with positioning control, including pneumatic retraction function - Multiple roller system for processing workpieces with dowel hole drilling - Radius scraping blade for processing 2 and 3 mm plastic edges, pneumatically adjustable - Flat scraping blade, pneumatically controlled - Corner processing unit with motorized adjustment for post-forming and soft-forming profiles, application-controlled shaping milling unit for processing front edges, edge thicknesses from 0.4-3 mm, workpiece height 10-60 mm, min. workpiece length 270 mm (Note: processing of wood edges is only partially possible) - Polishing unit - Lubricant spraying system for the combination milling unit - Spraying system for cleaning agents

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused. Gsdpfxjzy Hdao Al Sebu

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,962 mm, total height: 1,992 mm, total length: 1,450 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,150 kg, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 1,120 mm, table length: 1,962 mm, table width: 1,100 mm, power of feed motor: 750 W, air demand: 3,620 m³/h, input voltage: 400 V, operating pressure: 8 bar, > Digital grit adjustment and sanding pad control directly on the control panel > Sanding width 1100 mm Gsdpjzm Nifjfx Al Sjbu > Contact roller and sanding pad unit > Scotch-Brite brushes at the machine outlet > Two-sided roller table extension, 200 mm > Clearance height can be adjusted to an accuracy of 0.1 mm on the control panel > Stepless feed rate, 0.1-10 m/min

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 79-12/075-98, functionality: fully functional, input voltage: 380 V, input current: 86 A, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: electric, table length: 2,000 mm, total length: 2,220 mm, total width: 710 mm, total height: 1,220 mm, overall weight: 450 kg, Equipment: documentation/manual, Everything on the machine is in perfect working order. The sliding table has a length of 1920 mm. It was manufactured without brakes. It is in the condition shown in the pictures and is available for testing on a pallet. Gbodpjz N S Izefx Al Seu

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Gbodpfx Alszy Uzyj Ssu Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: excellent (used), Year of construction: 2019, Edge banding machine Manufacturer: Felder Type: Tempora 45.03 L Year of manufacture: 2019 Workpiece thickness: 8-45 mm Edge thickness: max. 3 mm Min. workpiece length: 140 mm Feed rate: 9 m/min Total power consumption: 14.5 kW Number of workpieces: approx. 75,400 pieces Gbjdpfx Aszlr Nfel Ssu Total edge length: approx. 59,300 m Jointing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius drawing blade: Yes Straight drawing blade: Yes Buffing unit: Yes Spray device: Yes

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. Gjdpszrwmiofx Al Sebu This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 Gbedpfxozwul Hj Al Ssu - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels