Used File Paternoster for sale (5,742)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Lhsdpfx Aexu U Trjh Uor Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: new, Year of construction: 2024, rotational speed (max.): 50 rpm, - Ring bending machine – Shaft diameter 50 mm Lhjdpfxelp Ryhs Ah Usr – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control – Emergency stop – Documentation – 400 V

Year of construction: 2006, condition: good (used), 3-axis / 5-sided machining center with ISOLA soundproof enclosure for aluminium, PVC, and steel profile bars. The machine is equipped with two machining zones and two tool magazines, which can be operated individually in pendulum mode or both together for full-length loading (multi-part operation). The clamps can be positioned independently to the left or right of the machining head. Lhedpfx Ajx Dimxjh Uor Travel distances: X-axis: 7000 mm Y-axis: 300 mm (+113 mm with the movable worktable) Z-axis: 350 mm P-axis: 3500 mm (for left clamp positioning) H-axis: 3500 mm (for right clamp positioning) 8 clamping elements (4 clamps per machining zone) 12 tool holders (6 holders per tool changer magazine/machining zone) Includes: Camplus software 2 angle heads

Condition: excellent (used), Year of construction: 1996, Surface and Profile Grinding Machine GEIBEL&HOTZ FS 850 SA Year of manufacture: 1996 Technical data: Maximum grinding area: 800 x 500 mm Magnetic chuck dimensions: 800 x 500 mm Min / max table to spindle center distance: 180 / 625 mm Maximum table load: 1100 kg Maximum table longitudinal travel: 920 mm Maximum cross travel: 500 mm Maximum vertical travel: 445 mm Lhsdpfjxvb Irox Ah Uor

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW dimensions of the machine ca.: 9 m Lhodow S Hy Hspfx Ah Uor ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head *

Condition: excellent (used), Year of construction: 2012, Article number MA1176 Manufacturer Metallkraft Type PRM30DF Lodsvutvvjpfx Ah Uohr Year of manufacture 2012 Machine number 4535121037 Length [mm] 650 Width [mm] 750 Height [mm] 1400 Weight [kg] 200 Connection power 380 V

Condition: used, Stereomicroscope, projection enlarger, microscope, projector MOTIC type SL-41 Series Year of manufacture: approx. 1995 Magnification lens W10X/20 Power supply 230 Volts, 50Hz - Table stand with power supply for reflected light - Height-adjustable objective head Lhedpfx Ahextq Aas Uor - Round column stand with large outreach, inclinable extension arm - Light source for incident light 12 Volts, 10 Watts Space requirement (L x W x H): 500 x 140 x 350 mm Weight approx. 10 kg Good condition

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop Ljdpfxjucqquj Ah Uehr - Documentation - 400 V

Condition: ready for operation (used), empty load weight: 340 kg, total length: 1,430 mm, total width: 560 mm, total height: 980 mm, Can work in horizontal and vertical positions 3 driven rolls digital readout hydraulic stroke of upper roll: 124 mm with tooling for tubedia 28 44 mm Read-out: digital readout Dia rolls: 165 mm Dia of die mandrel: 40 mm Rotationspeed: 10 rpm Lodpfxsxlli Es Ah Ujhr Motorpower: 1,85 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, shaft diameter: 100 mm, bending force (max.): 28 t, stroke length: 200 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Capacity: 90 mm Shaft diameter: 100 mm Usable shaft length: 280 mm Roller speed: 4.6 rpm Bending force: 280 kN Stroke: 200 mm MACHINE DETAILS Control: Conventional Motor power: 12.5 kW Ljdpfx Ahjxmgw Te Ushr Dimensions (L x W x H): 1,600 mm x 1,600 mm x 1,800 mm Weight: 2,800 kg EQUIPMENT CE marking Documentation

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: Lhjdpfx Ahjhx Ekpo Uer L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous Lhodpsxr N Rmofx Ah Uer C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Lsdpfx Ahjxyyyne Ushr Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, Year of construction: 2025, shaft diameter: 30 mm, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise Ljdpfxjxgb A Ds Ah Uehr - Usable horizontally and vertically - Foot operation - Emergency stop - Documentation - 400V

Condition: good (used), HERKULES BO 230 K2 / Ring and Profile Bending Machine incl. Roller Sets -Technical data see images -6 roller sets -Operating tool -Machine equipped with transport wheels Ljdpfexbh Trjx Ah Ushr Dimensions: LxWxH 1.6x1.6x1.7 meters Weight 1.8 tons Subject to errors and input mistakes.

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Lhedpfx Aeua Swweh Uer Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min

Condition: used, Year of construction: 1998, Technical Data: Grinding area (incl. grinding wheel width 50 mm): 700 x 320 mm Lodsxvy Hgepfx Ah Uohr Grinding height: 400 mm Longitudinal stroke: 740 mm Cross stroke: 270 mm Clamping surface of table: 1000 x 250 mm Distance table to spindle center: 650 mm Rotary table diameter: 200 mm Table load capacity, max.: 400 kg Spindle drive, stepless: 6 kW Grinding wheel dimensions, max.: ø300 x 60 x 127 mm Coolant system: 170 l Weight - complete equipment: 4600 kg Equipment: - Fully electronic multi-axis control system Brand NE (manufacturer Schleier) - Brushless AC servo and spindle drives - Manual feed of numerically controlled axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as a digital increment display integrated into the handwheel. - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Working area enclosure - Oil collecting trays - CE marking Accessories: - 6 x grinding wheel flanges incl. grinding wheels - 3 x grinding wheel flanges - 1 extractor device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction device - Raised vertical column for extraction unit

Condition: excellent (used), Year of construction: 2005, operating hours: 500 h, functionality: fully functional, feed length X-axis: 200 mm, feed length Y-axis: 150 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 2,000 rpm, Optical CNC Profile Grinding Machine WASINO GLS-5T Control: Fanuc 4-axis CNC controlled Lodpfx Aoxzqb Esh Ujhr Comprehensive accessories Inspection under power possible Technical data – see attached images

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Lsdpfx Ahexyyyhe Uehr Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, – Middle shaft: 35 mm diameter – Bottom two shafts: 30 mm diameter – Rotates clockwise and counterclockwise – Can be used horizontally and vertically – Foot control – Emergency stop Lsdpfx Aowdnbqjh Ushr – Documentation – 400V

Condition: good (used), functionality: fully functional, Year of construction: 2012, Digital display - Year of manufacture: 2000 Technical information Capacity see attachment Roller diameter Ø 245 mm Die spindle diameter Ø 70 mm Rotation speed 9 rpm Lhsdpoxn Tdpofx Ah Uer Motor power 4 + 0.75 kW Length 1380 mm Depth 1190 mm Height 1245 mm Weight 1600 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 4110BC19, control type: CNC control, MACHINE DETAILS Performance Data Connection: 380 V Lhodpfxoxxklxo Ah Usr Frequency: 50 Hz Rated power: 35 kVA Fusing: 63 A EQUIPMENT CNC control

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Lhjdpfx Ajxyyx Roh Ujr Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: new, shaft diameter: 30 mm, input voltage: 230 V, roll diameter: 30 mm, - Shaft diameter 30 mm - Rotates clockwise and counterclockwise - Emergency stop - With 1 set of standard castors - With 1 set of plastic rollers for pipe 16 and 50 mm - Documentation - 230V Ledsr Rug Hjpfx Ah Uohr

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel Ljdpfx Ahjg Sr I Ue Ushr - Emergency stop - Documentation - 400V