Used Film Processor for sale (1,695)

Year of construction: 2003, condition: refurbished (used), 16-page cross cutter / sheeter as used machine or according to customer's request electromechanically overhauled / revamped with warranty. cut-off length: 598,5mm, 620mm, 625mm or 630mm (to be specified) max. web width: 1000mm max. mech. speed: 40.000 cyl. rpm - 65.000 cyl. rpm year of construction: 2003 (basic frame, single parts new or overhauled) We can also offer you many other new and used variable in- and offline air- and belt cross cutters / sheeters for paper and film, with speeds up to 600m/min a.o. also with special options like multiple stacking stations, antistatic equipment, non-contact product transport a.o.! If you have any questions, please do not hesitate to contact us! Your specialists for cross cutting technology ! Iodpogqpvnsfx Abpoif

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Feed opening 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volumetric capacity: 1200 m³/h Isdpfx Aozulknobpeif Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions of press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made functional The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Year of construction: 2015, condition: used, Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2015 Technical data - Press table: 3000 x 1400 mm MULTIMAT - Membrane press table Mobile table with a pivoting heating hood and membrane frame High-performance vacuum pump TF 40, final pressure adjustable up to a maximum of 900 mb (9 t/m²) Pneumatically pivoting film fixing frame Usable membrane frame incl. highly elastic silicone membrane (700% elongation) Aluminum heating hood, fully insulated, continuously adjustable from 0 to 140 °C Digital differential pressure control Entire system (incl. vacuum pump) maintenance-free Electrical connection (incl. heating hood): 10 kW, 400 V, 50/60 Hz Iiedpfszu Ammox Abpjf Dimensions: External dimensions: 3200 mm x 1600 mm Usable area (without membrane frame): 2800 mm x 1200 mm Usable area (with membrane frame): 2750 mm x 1150 mm Table / working height: 900 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 Iisdpjzuz Euofx Abpsf - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Maximum operating temperature 180 degrees Celsius Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates Iedezuzw Djpfx Abpsif consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Thermo-lamination system Iiodpfszuzt Sjx Abpof Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, Laminate Coating System Manufacturer: Type: Master PUR-1400 Year of manufacture: 2016 Technical data Professional PUR hot-melt laminating system for acrylic, PET, PVC, HPL, and CPL sheets General description The MASTER PUR-1400 is a professional, high-performance laminating system designed for single-sided lamination of sheets with PUR hot-melt adhesive. The system is suitable for continuous industrial production and offers excellent surface quality with low adhesive consumption. It is designed for the production of high-quality furniture panels, interior design components, wall panels, and decorative panels. Suitable substrates The machine is suitable for laminating: MDF Chipboard Plywood PVC sheets Gypsum boards Other wood-based panels Compatible surface materials The system is designed for processing the following materials: Acrylic sheets (high gloss & super matte) PET film PVC film HPL laminate CPL laminate Decorative paper Technical data Working width: 1,400 mm Maximum sheet size: 2,800 x 1,300 mm Sheet thickness: 2-40 mm Production speed: 5-17 m/min Throughput: 3-5 sheets/min Maximum productivity: up to approx. 1,200 sheets per 8-hour shift Installed motor power: 21.49 kW Heating power: 51.7 kW Iedezuzkqjpfx Abpjif Overall dimensions of the machine: approx. 16 x 2.5 x 2 m Required installation area: at least 6 x 22 m System configuration The production line includes: Automatic feeding system with roller conveyor Brush cleaning system for sheets Infrared preheating oven (IR) 3-roller PUR adhesive application system Feeding station for decorative material Laminating press with pressure rollers Take-away conveyor 208-liter melting tank for PUR hot-melt adhesive Advantages Excellent laminating quality Uniform PUR adhesive application Suitable for high-gloss and super-matte acrylic surfaces Low adhesive consumption Stable and reliable operation in industrial series production High production efficiency Easy operation and maintenance Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Door panel postforming line Note: The line began series production in 2022; at this point, all machines were technically synchronized and, if necessary, overhauled. Door panel postforming line consisting of: Portal loading system Manufacturer: Kraft Year of manufacture: 2019 Technical data - with vacuum lifter - 2 infeed roller conveyors - one transport roller conveyor for further transport Wide belt sanding machine Manufacturer: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 consisting of: Wide belt sanding machine, sanding from below Technical data - contact roller - electronic shoe sanding unit - cleaning brush - intermediate transport belt, length approx. 3000 mm Wide belt sanding machine, sanding from above Technical data - identical equipment Complete formatting, laminating and postforming line consisting of: Roller conveyor system Manufacturer: Kraft Year of manufacture: 2019 Technical data - 3 individual elements - centering station Double end profiler Manufacturer: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical data - equipped with infeed conveyor and aligning station - saw unit below - trimming unit - edge trimming unit - prism milling cutter - joint milling cutter - cross edge milling unit - 3 profile milling units - brushes Laminating line consisting of: Infeed conveyor Manufacturer: Kraft Year of manufacture: 2019 Glue application machine Manufacturer: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical data - mechanically overhauled in 2018 - control system completely overhauled in 2022 - with infeed table, manufacturer Kraft - steel platform with stairs and various pumps - glue melting unit GWK Eco 03A Infeed table for laminating line Manufacturer: Kraft Year of manufacture: 2019 Laminating line Manufacturer: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical data - new Siemens Simatic KMG Touch control system - Bürkle GLK press calender - incl. film holder and saw for overhang - working width 1300 mm - 2 temperature control units GWK - column swivel crane for loading paper rolls - extraction conveyor Postforming line Manufacturer: Homag Technical data - infeed table - with 2 saw units, horizontal and vertical - intermediate buffer with 4 levels - infeed to the postforming machine - 2 identically constructed processing sides with glue application - PU pre-melting unit Nordson / VersaBlue, year 2020 and 2004 - pressure zone with revolving magazine for various profiles - various milling units and flap brushes - 2 cooling units BEKO Bekoblizz LC, year 2020 Belt conveyor with inspection system - swivel arm with vacuum suction cup - inspection station for optical inspection of the workpiece Portal destacking system Manufacturer: Kraft Isdpfxszuziyo Abpoif Technical data - with vacuum portal and 3 destacking stations Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Iodpfxszuy Nlo Abpeif Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm Iijdszuyp Espfx Abpof - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2021, The Smipack XP 650 ALX is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? Iiedpfx Abezp A Uajpsf AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: excellent (used), Year of construction: 2017, REF: MM6171 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. Iisdsw Euzmspfx Abpsf ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available Iiedpfxsztppxj Abpsf -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control unit, converter, controller, servo line former, drive control unit, AC mainspindle drive, spindle controller -Manufacturer: Indramat. AC mainspindle drive from a Mikron VC500D CNC machining center -Type: KDA 3.2-100-3-AP0-W1 -Art.: 776781-001 Ijdpfsztppfjx Abpsif -Dimensions: 485/390/H150 mm -Weight: 17.8 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller Iijdpfxoztplyo Abpsf -Manufacturer: Indramat, AC servo controller from CNC machining center Mikron VC500D -Type: TDM 1.2-30-300-W0 -Number: 3x servo controllers available -Price: per piece -Dimensions: 325/390/H105 mm -Weight: 8.2 kg

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Iisdpfx Aszrmqkobpof Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Number of milling spindles: 2 pcs. Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, HSM baling press, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Iodpfszt N Afjx Abpjif All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2021, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST/A, year of manufacture 2021 Iijdpfszt Nzzox Abpsf Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: good (used), Year of construction: 2014, Sliding belt conveyor, top conveyor belt, VHV Anlagenbau, year of construction 2014, useful width 1200 mm, good condition Technical data: Manufacturer: VHV-Anlagenbau Type: Top conveyor Year of construction: 2014 Drive power: 2.2 kW Conveyor speed: 0.42 m/s Conveying capacity: approx. 3 t/h (cardboard 0-200 mm) Axle distance: 34,050 mm / 8,670 mm Belt width: 1,200 mm Incline: 0.0° / 48° / 17° Transfer height: approx. 4130 mm Iijdpfx Ajzt Iknebpef Materials: Cardboard, paper, film The conveyor belt is in good condition. Due to its modular design, it can be easily adapted. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without any warranty.

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 2 Ijdpfx Aswnhxdsbpsif - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Iedozt Twyspfx Abpeif Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Slicer, Wedging, Coring & Stick Cutting Machine PND SS8 The PND SS8 is a professional fruit and vegetable cutting machine designed for the efficient processing of fresh produce. This versatile fruit processing machine is suitable for cutting, segmenting, and coring a wide range of products, including apples, pears, mangoes, kiwis, citrus fruits, pineapples, tomatoes, potatoes, cucumbers, and peppers. Thanks to its interchangeable knives, the machine produces precise slices, wedges, sticks, and segments with consistent quality. The PND SS8 offers a capacity of up to approximately 50 fruits per minute, making it ideal for fresh-cut companies, fresh produce processors, and the food industry. The robust stainless steel construction meets the highest hygiene standards and is easy to clean. Product-contact parts can be quickly removed, significantly reducing cleaning and maintenance time. The compact machine can be easily integrated into an existing production line. Its precise cutting technology minimizes product waste while maintaining optimal quality of the finished product. The PND SS8 is suitable for both small and large production volumes and provides a reliable solution for efficient fruit and vegetable processing. If you are looking for an industrial fruit cutting machine, apple cutting machine, mango coring machine, vegetable cutting machine, fresh produce processing machine, or fresh-cut machine, the PND SS8 is a durable investment combining speed, precision, and high processing capacity. Production capacity: 3,000 pieces/h Functions: Cutting, coring (pitting) Cutting shapes: Slices, wedges, sticks Installed cutting knife: Mango coring knife Voltage: 400 V (3 + N, 50 Hz) Power: 1 kW Weight: 580 kg Year of manufacture: 2014 Iiodpfszur Srsx Abpsf Dimensions (W x D x H): 4300 x 2030 x 2550 mm

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, display film damaged (see photo 2), otherwise normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfxei D Uh Io Abpsif

Condition: new, AEG Modicon S 975 communication processor for 984, unused, 100% functional. Iodpfei D Tu Hsx Abpoif

Condition: good (used), Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, In stock Channel baler HSM VK 4812P, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Ijdpfx Abeztphhopeif Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.