Used Fixed Head for sale (13,291)

Year of construction: 2009, condition: used, Apple 15 head depositor Model: CCP12 Godpfjb Ucwksx Ac Aetw Stainless cantilever framed 15 head machine

Year of construction: 2008, condition: used, Apple Engineering Gtedpfx Acjb Ua E Sj Aew Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Gedpsw A Amrofx Ac Ajtw Weight: approx. 1200 kg Good condition

Condition: used, Wobble riveting head BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 rivet shaft diameter: max. 10 mm tool diameter: 12 mm rivet head stroke: 40 mm riveting spindle speed: approx. 1400 rpm motor power: 0,37 kW Mains connection: 380 Volt, 50 Hz - Riveting pressure adjustment infinitely variable via hydraulic pressure - Micrometer stop for stroke limitation Gtjdjglarljpfx Ac Aew - stroke movement via oil hydraulics (max. 45 bar) - machined flange surface Ø 115 mm with fixing nut on housing total length: approx. 800 mm weight: approx. 40 kg good condition The rivet head has a multi spindle head to set 2 or 3 rivets at the same time. This can be dismantled and used normally. For normal use the normal wobble head which holds the tool is missing.

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Gsdpfxsd Dk A Ao Ac Aetw Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2025, Equipment: air conditioning, = Further options and accessories = - Leaf spring suspension - Sleeper cab = Remarks = Gtjdpowwkm Nefx Ac Aew Fuel tank: 590 ltr. Air conditioning = Further information = Gearbox: MAN 16.25 OD, manual transmission Year of manufacture: 2025 Tyre size: 315/80R22.5 Suspension: leaf spring suspension Front axle: steered Number of cylinders: 6 Engine displacement: 12,419 cc = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, such as supplying spare parts and delivering (local) training.

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW Gtodpeya Hiqsfx Ac Aow 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: new, Face milling cutter (28465) Make Widia Face Mill M 640,Type 125 B 12 RS 60 HP 06D Diameter 125 mm 12 cutting edges new and unused in opened packaging Gtodpfx Acerwfpxs Ajw

Condition: new, Copy and face milling head (28466) Make Widia Gtodpfxsrwfpfj Ac Aew Type M 100 Copy Mill D 63 OZ5 diameter 63 mm in opened original packaging

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces the common laser printers - also colour prints on glass, wood, textiles, plastic, metal and many other materials New model: PS-UV4060 Max Pro Double / double head machine 2x CMYK + 4x white Speed monster!! Print head: 2x Epson TX800 (CMYK + CMYK + WWWW / 12 channels) 720x1080 / 720x1440 / 720x2160 dpi Including software for printer and image processing weight: 95kg Operating display Table movement through screw technology 360 degree use possible on request: for large round bottles Objects A2 size 45x65cm and 20cm print height Gsdefvx U Uspfx Ac Aetw printer dimensions: 920x940x570mm Water Circulation Cooling System Software setting and printer explanation gladly if required. Germany/Europe-wide.

Condition: excellent (used), Forza Model 71510 - Boring Gedpfx Aju Ndl Ioc Aotw MILLING HEAD FORZA SOLO MANDRINO 85 mm The single spindle milling head is an essential component in machining operations, specifically designed to be the operational core of a milling head. This device is characterized by its robustness and precision, since it is in charge of holding and rotating the cutting tools, such as milling cutters, drills or reamers, without including the chuck or the milling cutter holders. Its design allows for easy adjustment and tool change, which makes it an essential part in any milling process that requires high precision and efficiency. Manufactured with high quality materials, such as hardened steel, the spindle guarantees the stability of the tools during milling operations, minimizing vibrations and ensuring a high quality finish on the parts being machined. Weight: 26.4 Kg FORZA DRILLING CONES Ref. 714140 / 714150 Trailing cones for milling heads are essential components in machining operations that require superior accuracy and stability. These cones are devices that attach to the milling head and serve to secure the workpiece or cutting tool during the milling process. They are made of high-strength materials, such as hardened steel, and designed to withstand the high cutting forces generated during milling. CLAMP Diameter: 265 mm Inside diameter from edge to edge : 190 mm Distance between points: 108 mm Diameter of points: 13 mm Rim diameter: 35 mm MILLING HEAD FORCE CLAMPS - 14mm / 10 mm / 7 mm

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Gtodpfx Asydk Ryoc Asw Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 240 mm Price: 500 Euro

Condition: ready for operation (used), Head and Return Drums Gedpfji A Aq Sjx Ac Astw in divers diameters and Lengths

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Gjdsx Nfp Aopfx Ac Aetw Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Year of construction: 2026, condition: new, functionality: fully functional, VH 3 Technical Data - Lifting arms with 3 joints, length 2140 mm (optional: 2500 mm). Pneumatic height adjustment, 6 bar compressed air connection. Lifting speed: 2 cm/sec. Max. tool weight, vertical: 50 kg. Max. tool weight, horizontal: 100 kg. WJS Tool Lifter • Improve your working conditions and protect your back. • No more heavy lifting or unnatural working postures during tool changes! • The ergonomic tool lifting device from WJS makes tool changes on planing machines significantly easier. • It doesn't matter if you want to change tools on the horizontal or vertical spindle. • The lifting device protects not only the operator but also the tool and spindle. • Tool changes become faster, saving your company costs and increasing productivity. • Whereas previously two people had to lift heavy loads, now one person can easily move the large tool weight. Ex works price. Delivery time: 10–12 weeks. 1 unit available from stock, subject to prior sale. Gtodpfx Acoym Rygs Aew

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Gtjdpfxeyf Dp Ej Ac Ajw Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, 1 brand new universal milling head, HURON system Make: EMENA Model: V 0, ISO 40, standard version Technical specifications: - Taper: ISO 40 - Outreach: 270 mm - Rated drive power: 5 HP - Max. speed: 1800 rpm - Weight: approx. 32 kg Design: Standard version, with adapter plate / mounting flange, head side finished, machine side unfinished, for subsequent installation on conventional, NC, or CNC milling machines or any type of boring mill, HURON system Option: - Adapter plate, head side finished, machine side with machining allowance Gtsdpobpmv Sofx Ac Aew - Raised version Delivery time: approx. 3 months after receipt of order and payment Images are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2023, = Additional Options and Accessories = - Leaf suspension - Sleeper cab = Remarks = = Additional Options and Accessories = - Sleeper cab = Further Information = Model year: 2023 Damages: none = Company Information = Van Vliet Automotive Trading - Your Truck Partner A large selection of new trucks, trailers, 4x4 vehicles and machinery. Ready for immediate delivery! Our own (engineering) workshops, modification center, and paint shop ensure quick and project-specific handling of your order anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers, working globally on-site to provide technical support and training. Contact our experienced, multilingual customer service team now for professional, project-specific, and competitive advice. Gtjdpjvpqbxsfx Ac Ajw = Further Information = Transmission: MAN 16.22OD, manual transmission Year of construction: 2023 Model year: 2023 Tire size: 315/80R22.5 Suspension: leaf suspension Number of cylinders: 6 Engine displacement: 10,512 cc Damages: none = Company Information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, including spare parts supply and provision of (local) training. WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Condition: new, power: 184 kW (250.17 HP), fuel type: diesel, tire size: 275/80R22.5, axle configuration: 4x2, wheelbase: 3,560 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2022, Equipment: air conditioning, = Additional options and accessories = - Leaf suspension = Notes = Fuel tank: 2x 275 liters Air conditioning Luxury seats Day cab Gtsdpfxsvy E Tkj Ac Ajw = Further information = Transmission: Eaton FS6306B, manual gearbox Year of manufacture: 2022 Tire size: 275/80R22.5 Suspension: Leaf suspension Front axle: Steered Gross vehicle weight: 17,000 kg = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales service, including the supply of spare parts and the delivery of (local) training.

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 325/95R24, axle configuration: 6x6, wheelbase: 3,900 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2023, = Additional options and equipment = - Leaf suspension - Spare wheel - Sleeper cab = Remarks = = Additional options and equipment = - Sleeper cab = Further information = Model year: 2023 = Company information = Van Vliet Automotive Trading – Your Truck Partner A large selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate use! Our own (engineering) workshops, modification center, and paint shop guarantee fast, project-oriented processing of your order, anywhere in the world. ISO- and AEO-certified. Logistics handling and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers who operate globally on-site to provide technical support and training. Contact our experienced, multilingual sales team now for professional, project-specific, and competitive advice. Gsdpfx Aovpqdasc Aetw = Further information = Transmission: MAN 16.25OD, manual gearbox Year of manufacture: 2023 Model year: 2023 Tyre dimensions: 325/95R24 Suspension: Leaf suspension Number of cylinders: 6 Engine displacement: 10,518 cc = Company information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer of MAN Truck & Bus SE for several African countries. Supported by comprehensive after-sales services, such as parts supply and implementation of (local) training programs.

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Gjdpfx Ajyn N Apsc Aotw

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Godpfx Asykkx Djc Astw Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Year of manufacture: 2014 Faceplate diameter: 500 mm Gjdpfoyllx Iex Ac Ajtw

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Gjdpfx Aev T Ilvsc Aetw Storage location: Bad Wimpfen

Condition: like new (used), functionality: fully functional, For sale: very nice double head stitching machine. Brand: Agrafix, type DK 80. Suitable for brochures or blocks. This machine is working 100% and is complete. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Gjdpfx Acsw Ta Hps Astw