Used Flexo Laser for sale (3,043)

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer Pgedpfx Abjyhclwsuou CNC Top Ten b.v. Coevorden Holland

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): Pgodpfxez Tut Us Abuju - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators Pgedpsyctfdjfx Abusu - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 12,000 W, working length: 2,030 mm, working width: 4,020 mm, power: 12,000 kW (16,315.44 HP), type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, X-Axis Travel(mm）: 2050 Y-Axis Travel(mm）: 4050 Z-Axis Travel(mm) ：270 Pgjdpfxowxaq To Abuju X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 170m/min Maximum Acceleration: 2.5G

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE). Pgedpfxsz R Eiuj Abueu

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 350 h, overall weight: 2,359 kg, input voltage: 400 V, For sale is a high-quality, professional Just Laser core laser with 400W CO2 laser power. This machine is ideally suited for precise laser cutting and engraving in a wide variety of materials. The system is in very good condition and has seen little use due to its low operating hours (approx. 400 hours). It is ready for immediate use. The system features 2 cutting heads for the most precise results: 1. Standard laser head for cutting wood, MDF, HDF, plywood, solid wood, acrylic, leather, cardboard, many plastics, etc., and engraving wood, glass, leather, textiles, rubber, melamine, cardboard, acrylic, ceramics, and many plastics. 2. Metal cutting head with automatic height adjustment for steel, aluminum, copper, and brass. 3. K-Vision camera option Table size: 2540x1320 The system also includes: * 5 kW frequency-controlled extraction system * Activated carbon and cartridge filters * 5 kW Mark screw compressor Inspection is possible by appointment. Cutting thickness: up to 24 mm for wood, 3/4 mm for steel sheet. According to the manufacturer, it is the fastest large-area engraving machine on the market, with a speed of 3.8 m/s. Pjdpfx Absznbzvousgu

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Pgsdpfozg D I Asx Abuou NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. TECHNICAL SPECIFICATIONS Pgjdpfxexfi Irj Abusu Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Pgedpfx Abszyzwnsuju Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. - Machine with automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement protocol) - very space-saving - extremely energy-efficient cutting system - requires only approximately 8.5 x 3.5 meters of floor space - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule a viewing now! Cutting of steel sheet up to 35mm Cutting of stainless steel sheet up to 20mm Cutting of aluminum sheet up to 20mm - Travel range 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures of the cutting head - on three sides, large laser protection windows for observing the cutting process - automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser chiller - Machine control in German - extensive service and warranty services - powerful laser chiller - Filter extraction optional The following options are also available: - automatic nozzle changer (optional) - automatic nozzle centering (optional) - Raw material sheet detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5m Height: 2.3m Width: 3.5m Total weight: approx. 8000kg Do you need a different laser power, different table shape, or different table size? No problem. I will gladly prepare a suitable offer. For example, a 2 kW machine from 29,990 euros or a 6kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just call us! Of course, I will carry out cutting tests according to your requirements. There are many possibilities here. Pgedpfexg Dn Ajx Abusu

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps Pgsdpez Hwzmjfx Abueu - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.02 mm Maximum speed: 80 m/min Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs Pgodpfoxfrgksx Abuou Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Podsz R Dz Aspfx Abujgu Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,288 h, laser power: 300 W, travel distance X-axis: 700 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details. Pgodpfx Abjzdi I Njueu • Working area size: 500 x 700 mm • Material support table: 550 x 750 mm • Max. weight of material to process: 40 kg/m2 • DSP running time: 6744 h • Power ON time: 4579 h • Execution time: 1288 h

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system Pgodsy Ed S Iepfx Abuou 2 CCD cameras Teka extraction unit ECO-Cube

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light Pedpfx Abeyimz Aeusgu - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Podpfx Aoz Nhr Ajbujgu

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Podpfeyim S Isx Abujgu Condition: - New machine - CE compliant - Made in Germany

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Podpfx Aboy Efbkeuogu

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 Pgsdpfxjyimpas Abueu - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine - CE · Made in Germany

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Pjdpjw A Ik Nefx Abuegu Fully automatic butter injection system Cutting area 6000 × 1500 mm X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Fully automatic cutting, material saving, fast speed

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed and fly cutting movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: ( up till 20 mm thickness steel ) • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Pgedsx Rn Tmspfx Abusu Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit 400-460V AC 3P/PE Pgsdpfjrq D D Eex Abuju 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. TECHNICAL SPECIFICATIONS: Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Maximum speed: 80 m/min Acceleration speed: 0.8G Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Pgedpfoxfiwyex Abuju

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Pjdpoytd Scsfx Abujgu Official Dealer CNC Top Ten b.v. Coevorden Holland