Used Food Processing for sale (21,897)

Condition: used, Year of construction: 2003, machine/vehicle number: 729.723.01, MACHINE DETAILS Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Rated operating current: 165 A Incoming feed line protection: 200 A Microcut Motor power: 90 kW Rated current: 158 A Mixing screw Motor power: 2.2 kW Rated current: 5.20 A MC screw Motor power: 4.0 kW Rated current: 8.80 A Gedpfxo Ahgiks Aanebw Conveyor screw Motor power: 3.0 kW Rated current: 6.80 A Agitator, buffer tank Motor power: 1.5 kW Rated current: 3.60 A Note: Further technical data can be found in the attached document.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14-35-15-10-02, The device is made of AISI 304 stainless steel. It has been lightly used and stored in a warm, dry area. The device is currently not in use, but it can be started after prior arrangement. Technical documentation, including a CE declaration, is available. - Total drum length: approximately 3100 mm. - Total drum height: approximately 2050 mm. Gbedpj Af Ihcsfx Aanow - Inclination angle: 0 to -6º - Maximum drum diameter: 800 mm. - Motor rotational speed: 1.375 rpm - Gearbox ratio: 25.00 - Service factor: 2.2 - Rated motor power: 0.750 kW - Motor supply voltage: 230/400 V Additional information can be found in the attached photos.

Year of construction: 2003, condition: used, maximum load weight: 20 kg, tank capacity: 37 l, machine/vehicle number: 20300211, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drum Design: perforated drum with double jacket Capacity: 37 l Drum diameter: 400 mm Drum depth: 300 mm Inlet diameter: 400 mm Loading weight: max. 20 kg Drum speed: max. 1,800 rpm MACHINE DETAILS Motor power: 7.5 kW Voltage: 400 V (Ex) Dimensions and Weight Footprint: 2.5 x 1.1 m Overall height: 1.3 m Weight: 2,000 kg EQUIPMENT Perforated drum Gedps Akbflefx Aansbw Double jacket ATEX design Mounted on a frame

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 Gjdpfxo Adrqqj Aanjbw • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 • Year of manufacture: 2001 • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working condition, but it is currently out of service and stored in a dry and warm area. It can be started upon prior arrangement. All technical documentation and the CE declaration are included. A detailed description with specifications can be found in the attached .pdf documents. The maximum working height (height of the cooled material) is 6 cm. Gbsdpfxj Af Ng No Aanjw

Year of construction: 1969, condition: used, machine/vehicle number: 1054, General SKU: 213M066 Manufacturer: Brogli + Cie Basel Type: Multi Homo MH-20 C No.: 1054 Year of manufacture: 1969 Location: Barneveld Pressure Vacuum possible: ✔ Main features Material: Stainless steel Capacity: 20 Specified features - process vessel Closed stirred tank: "Vacuum processing vessel" (1x) Capacity: 20 liters (useful) Vessel dimensions: dia. 340x250mm, vessel mounted on wheels With lid: ✔ Outlet: dia. 20mm With double jacket: (with electric heating, 4000 Watt) With anchor stirrer: "scraper stirrer" With homogenizer: ✔ Material: Stainless steel 1.4404 (316L) With double jacket: ✔ Gbodpfs Akbw Djx Aanjw General With switch: ✔ Footprint: 1.4x0.7 m Overall height: 1.4 m Weight: 380 kg Additional information Additional specifications: Vessel mounted on wheels What you can expect from Foeth: all our machines are in working condition and offered at a reduced price compared to new machines. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Gjdez Ad Dcjpfx Aansbw Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: excellent (used), Year of construction: 2008, operating hours: 86,100 h, functionality: fully functional, machine/vehicle number: 992793, type of input current: three-phase, overall weight: 22,000 kg, total length: 9,500 mm, total height: 2,300 mm, total width: 9,100 mm, working length: 1,916 mm, Automated swiveling bending machine with robotic destacking! The bending rail was renewed in 2024! The robotic suction frame was renewed in 2025! TECHNICAL DETAILS Bending length: 1,916 mm Pallet positions: 3 Robotic suction frame: OPA16S MACHINE DETAILS Dimensions (L x W x H): 9,500 x 9,100 x 2,300 mm Total weight: 22,000 kg Space requirement (L x W x H): 9,500 x 9,100 x 3,000 mm Input power type: Three-phase AC Operating hours: 86,100 h EQUIPMENT Gbsdo Agnubopfx Aansw Robot for automatic destacking of manufactured sheet metal parts Suction frame OPA16S Three pallet positions for storage and sorting Integrated conveyor system for automated material transport Automatic sheet metal processing and workpiece placement

Condition: used, Year of construction: 2019, Manufacturer: DJM Model: COEX 4 Year: 2019 Condition: Used Serial number: N500003 Stock number: 3365 Number of heads: 4 Godpfx Ae Ah Ttyoanobw Capacity: max. 100 cycles/min. Product diameter: max. 60 mm Product temperature: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg For filled products.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals. Gbjdpfx Asxb Alveanjw

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. Gjdoxuhw Depfx Aanjbw ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 24-810, total length: 1,100 mm, total width: 730 mm, total height: 1,620 mm, overall weight: 550 kg, Ref: MM6323 2024 ROKK RFE 300 continuous ice cream freezer in very good condition, rated at 100 to 300 litres an hour. It was installed for test production and has never been used in full production. It comes with two air compressors, pipes for connection to a pasteuriser, and spare parts. The machine is at our unit in Tarnock, Somerset, and can be viewed. Video of it running is on this page. Freezer Manufacturer: ROKK Processing Ltd Model: RFE 300 Serial number: 24-810 Year: 2024 Output: 100 to 300 litres per hour Overrun: 25% to 150% depending on mix (ROKK specification); panel set at 50% Controls: electromechanical, with litres-per-hour and amps displays, manual hot gas and a CIP cleaning mode Dispensing: fixed and flexible hose options Refrigerant: R404A, 9 kg charge Condenser: water-cooled; a cooling water supply is needed Electrical: 400V, 3 phase, 50Hz, 6.5 kW Compressed air: 10 NL/min Dimensions: 1100 mm long × 730 mm wide × 1620 mm high Weight: 550 kg The spray arm on top detaches for transport. Included Hyundai HY27550 air compressor, 50 litre, 230V Gsdpfx Aaoydlg Aonjbw Second compact air compressor Pipes for connection to a pasteuriser Spare parts: hoses, stainless pipework, clamps and fittings, and a box of seals and small parts Documents EU Declaration of Conformity (ROKK, serial 24-810)

Condition: excellent (used), Toyo Jidoki TT9-CW Rare 2 lane pouch filling and sealing machine, for tear top stand up pouches. In excellent condition direct from ultra high care factory. Perfect for packing sauces, dairy products, babyfoods, ready meals etc. Gbjdpfx Aoyzi Igsanjw

Year of construction: 2020, condition: used, Burdosa (often associated with Burtech or Herwig Burget) manufactures industrial continuous mixing and liquid dispersion equipment—such as the Burdosa GR80 dynamic loop mixer-emulsifier. Key Features of Burdosa Mixers (e.g., Model GR80) - Design: Totally enclosed, symmetric-cylindrical inline continuous dynamic loop mixer. - Function: Provides continuous back-mixing, dispersion, and emulsification by guiding components through a central mixing zone. - Shearing Tools: Can be fitted with interchangeable shearing heads depending on whether the process requires gentle mixing, standard blending, whipping, or fine emulsification. - Capacity & Power: Typically rated around 60 to 92 gallons per minute (depending on configuration and product viscosity) and powered by a ~5.3 to 5.5 HP (4.0 kW) motor. - Sanitation: Designed to be CIP (Clean-in-Place) compatible for food-grade processing. Application in Margarine Production In margarine and fat-blend processing lines, dynamic loop or inline high-shear mixers are used to: - Blend the water-and-oil (fat) phases together into a preliminary emulsion before it moves to scraped-surface heat exchangers/crystallizers. - Jongia Mixing Technology +1 - Incorporate minor liquid or solid additives (such as emulsifiers, salt, or vitamins) uniformly into the continuous or dispersed phase. - Jongia Mixing Technology Godpfxo Ahr Its Aanobw - Maintain controlled residence and back-mixing to prevent phase separation before chilling and texturizing Products: Margarine, Mayonaise, etc. Condition: Excellent Available: Immediately

Year of construction: 2014, operating hours: 40,000 h, condition: used, functionality: fully functional, belt width: 560 mm, number of shelf rows: 8, machine/vehicle number: B6, High-Capacity Industrial Ambient Spiral Cooling Conveyor Tower Gedpfxez E A Rke Aanebw Heavy-duty 8*2 -tier ambient spiral cooling tower engineered for food production and industrial bakery applications. Built entirely with a high-grade stainless steel frame and structure, ideal for washdown environments and strict hygiene standards. Key Technical Specifications: Tier Count: 16 continuous spiral tiers / turns. Belt Width: 560 mm food-grade blue open-mesh modular belt for maximum air circulation and product stability. Drive System: Heavy-duty Brevini / Rossi industrial planetary gear drive motor assembly. Control System: Freestanding stainless steel electrical control cabinet featuring a Siemens SIMATIC HMI touch display panel, integrated VFD variable speed frequency drives, and emergency safety stops. Applications: Suitable for ambient cooling of baked goods, confectionery, wafers, packaged products, and snack items prior to packaging. Condition: Used, Dismantled ،fully functional, clean, and in very good working condition.

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Gsdozl Tb Nopfx Aanebw Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase. Gbodovw I Nispfx Aanew

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high.  Gjdox Tg Axspfx Aanebw

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Gedpfszwgiqsx Aanjbw

Condition: like new (used), Year of construction: 2022, Orbmix FL440 Full Block Flaker. Rotating shaft with cutting knives to create the flakes. Gbodo Aithpjpfx Aanew

Condition: like new (used), Year of construction: 1997, functionality: fully functional, KUIPERS FOOD PROCESSING ID.NO. 2824 Kuiper's reliable conveyor belt made entirely of stainless steel can also be adjusted to adjust the inclination of the belt. H in 115 cm H out 185 cm. Band width 49 cm Gbjdpfeu Iw Umjx Aanjw Dimensions 186 x 80 cm Height 200 cm.

Condition: excellent (used), Year of construction: 2014, Bone Separator Make: Baader Model: 601 Gbodpfj Ah Sl Eex Aanew Rated at upto 800kg raw material per hr Built 2014 Little use 5mm drum Ex fish factory

Condition: used, Year of construction: 2011, GEA CFS Slicer For cooked and uncooked meats, fish or cheese Year 2011 With stack and shingle facility in groups With weight adjustment It requires a new HMI screen Apart from this, it is in very good condition The outfeed conveyor system is Year 2017 Godj Aibm Nspfx Aanobw The machine is offered as it is requiring a new HMI screen Price is ex works, Radstock, UK Price €20,000.00 Price £17,500.00 Transport to Europe can be quoted we ship worldwide.

Year of construction: 2006, condition: refurbished (used), machine/vehicle number: classic 600, FOR SALE – FRIGOSCANDIA CLASSIC 600 SPIRAL FREEZER Manufacturer: Frigoscandia Gjdsz Nzm Hspfx Aanjbw Model: Classic 600 Equipment type: Industrial Spiral Freezer Belt width: 600 mm nominal Application: Industrial food processing and continuous product freezing Equipment Description Available for sale is a Frigoscandia Classic 600 industrial spiral freezer, designed for high-volume continuous freezing of food products in commercial and industrial food-processing facilities. The machine features a multi-tier spiral conveyor system that allows products to pass through a temperature-controlled freezing enclosure, providing efficient product handling and making effective use of available factory floor space. The Frigoscandia Classic range is suitable for a variety of food-processing applications, including meat, poultry, fish, bakery products and prepared foods, subject to the machine's original configuration. The equipment may include the spiral conveyor belt, drive assembly, motors, gearboxes, evaporator, circulation fans, insulated enclosure, electrical controls and product transfer interfaces. The precise specification and completeness are to be confirmed. Sale Information - Manufacturer: Frigoscandia - Model: Classic 600 - Condition: To be confirmed - Operational status: To be confirmed - Year of manufacture: To be confirmed - Location: Available on request - Price: Offers invited Inspection can be arranged by appointment, subject to availability and site access requirements. Interested buyers are invited to enquire for further technical information, photographs, dimensions and pricing.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 Carnitech CT 2612 single-lane pin-bone removing and packing line for salmon and trout fillets. The pin-boner dates from 2000 and the packing line from 2023/24. Technical specification: ✅ Manufacturer - Carnitech A/S ✅ Model - CT 2612 ✅ Lanes - 1 ✅ Pin-boner year of manufacture - 2000 ✅ Packing line year of manufacture - 2023/24 ✅ Capacity - up to 36 fillets per minute ✅ Fillet size - 0.5 kg to 4 kg ✅ Fillets are conveyed head end first, skin side down, on a PVC belt Gedpfey Swi Hjx Aansbw Condition: According to the seller, the line is in full working order, and the pin-boner has been refurbished, including new electrics. Video available.