Used Format 4 Dual 51 for sale (43)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a used Format4 jointer-planer machine with a jointer length of 2250 mm. The machine has been inspected by our specialist staff and is in as-new condition. Technical data: Jointer/planer width 510 mm DUAL foldable jointer tables Silent Power cutterblock Planing height 4-250 mm Variable feed rate 4-16 m/min 10 HP (7.35 kW) motor Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thickness planer, jointer, planer Bjdpfx Ahownd T Ro Hswh Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Bwjdpsyddqmsfx Ah Hsh Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0711ST0619, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Bwjdpfx Aheyddmns Hoh Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: not inspected (used), Year of construction: 2009, operating hours: 6,000 h, functionality: unexamined, feed rate X-axis: 80 m/min, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Bodpfx Aheyc Smgj Hjwh Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning 2 working areas for pendulum operation Handheld terminal Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm Bsdpfx Ahex Hllxe Hswh - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2018, Working width: 410 mm Cutterhead: reversible knives Number of knives: 4 Jointer table length: 2000 mm Jointer fence angle adjustable: yes Jointer tables fold up: manual Maximum thicknessing capacity: 240 mm Thicknessing table height adjustment: handwheel Display for planing thickness: mechanical counter Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Bwodpfoyhgh Nsx Ah Hoh Motor power: 3 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Bwedjxy Tlwjpfx Ah Heh

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Extraction port: 2 x 100 mm Width: 1,700 mm Bwodpfxoud Sk Sj Ah Hjh Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Bedpfsxnm Rcox Ah Hswh Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, Bwsdpfeu R S Nwjx Ah Hoh glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Bwodporrh T Aefx Ah Heh Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Bodpfew I Uv Uox Ah Hjwh Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm² Bwjdpfox U Tv Iox Ah Hoh

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence year 2008 iron cast tables Bsdpfew Ad Iwox Ah Hjwh

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The machine has hardly been used! Motorized height and tilt adjustment. Variable speed. Centrex cutter guard. Position-controlled fence. Fence 250 with fine adjustment and digital display. Quick-change spindle system. Integral fence jaws. Table extensions on each side, 670 mm. Pull-out frame with emergency stop. Motor power 7.35 kW. Feed unit with 4 rollers and stepless speed control. Bwedpfoyf Hf Ajx Ah Hoh

Condition: like new (used), For sale is a used Format4 Kappa 450 sliding table panel saw with a cutting length of 2800 mm. This machine is currently being used as a showroom display unit and is therefore in like-new condition. Technical specifications: - Cutting length: 2800 mm Bwsdpfow Hd Sqjx Ah Hsh - Cutting width: 800 mm - Cutting height: 155 mm - Max. saw blade diameter: 450 mm - Electrically adjustable height and tilting - Extraction port Ø 120 mm - Motor power: 7.5 kW / 10.2 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! For more information call: 06244-20299 Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-A0117

Condition: used, Year of construction: 2020, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, type of input current: three-phase, Further technical data: Ball-bearing turntable for edge banding rolls, Ø 740 mm Edge thickness: 0.4 – 3 mm Workpiece height: 8 – 45 mm Extendable workpiece support up to 450 mm Manually adjustable workpiece height m-motion and x-motion PLUS control systems (highest setting repeat accuracy, programmable) Robust processing units in new design, solid machine base, precise extraction system Additional equipment: Surface scraper Spraying unit for cleaning agent LED lighting package Tempora 45.03 Bwedpfx Ahoxdb U Us Hoh Spraying unit for release agent Cross-cut saw unit with 45° travel path and radius processing Pneumatic-mechanical infeed lock 75 x-motion PLUS package Tempora 45.03

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, functionality: fully functional, edge thickness (max.): 3 mm, product height (max.): 45 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit Bwjdpowwq Dzefx Ah Hsh 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 60.11.012.01, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,610 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, table length: 3,200 mm, table width: 1,610 mm, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Format-4 Kappa 450 – Panel Saw – Well-Maintained Condition For sale is a Format-4 Kappa 450 panel saw from the manufacturer Format-4 (Felder Group), year of manufacture 2001, in fully functional and well-maintained condition. Features and Equipment: - Integrated scoring unit - Extra-wide rip fence – up to 1,610 mm cutting width The machine has been regularly serviced and is in good technical and visual condition. Key Technical Data: Model: Format-4 Kappa 450 Year: 2001 Saw blade diameter: max. 450 mm Cutting width at rip fence: 1,610 mm With scoring unit and tilting function Bodpfoxvdqijx Ah Hswh Condition: Used, well-maintained, fully operational.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20.08.023.22, feed rate X-axis: 12 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 9 m/min, workpiece weight (max.): 40 kg, workpiece height (max.): 45 mm, temperature: 180 °C, The Felder Format4 Tempora F400 is a premium edgebander designed for professional woodworking, prioritizing speed, efficiency, and high-quality results. Very little working time, it's around 50.000m' in total. You can come and see while operating in our factory. All components have been recently serviced, except for the front blades, which are still in very good condition and have not required maintenance. The machine is fully operational and ready for use. The reason we are selling is that we ordered a larger industrial one. Bwjdpfx Ahsxfk A Ds Hjh Technical specifications Edge thickness: 0.4–3 mm. Workpiece thickness: 8–45 mm. Feed speed: 9 meters per minute. Controls: smartouch with a 10.4" touch screen, available with m-motion or x-motion PLUS packages for varied levels of automation

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 5,540 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 350 mm, number of axes: 5, This 5-axis FORMAT4 Profit H500S 16.56 was manufactured in 2016. It features a large working area with dimensions X=5540 mm, Y=1570 mm, Z=350 mm, and is equipped with a 5-axis main spindle. The machine includes a drilling head with 12 vertical and 6 horizontal drilling spindles, a grooving saw unit, and a motor controlled via inverter up to 7,500 rpm. It also has two tool changers and a Becker vacuum pump. Contact us for more information about this machine. • Drilling head: • 12 vertical drilling spindles, 32 mm grid • 6 horizontal drilling spindles, 32 mm grid (4 in X-axis, 2 in Y-axis) Bsdpfx Ahoygwxvo Hswh • Grooving saw unit arranged in X-axis • Motor controlled via inverter up to 7,500 rpm • Tool changers: 2 • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • 1 Becker vacuum pump

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Table Table load 130 kg Tools Bsdpfx Ajx D H Sroh Howh Max weight 7.5 kg Additional Equipment Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Bwedpfxox Rugtj Ah Hoh Electric height adjustment Operator panel at eye level Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202.01.006.16, feed rate X-axis: 12 m/min, total length: 3,940 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Regularly serviced by the manufacturer All operating manuals available Bwsdoxuik Sopfx Ah Hsh Replacement due to upgrade to a larger machine

Condition: good (used), Year of construction: 2019, Throughfeed CNC machine FELDER GROUP FORMAT4 CREATOR 950 (year 2019) with glue and dowel insertion, 12 kW HSK-F63 milling unit, integrated Ø 120 mm saw, dowel unit, and feed speeds up to 90 m/min represents a compact solution for precise milling, drilling, and panel sizing of wood. Key Technical Advantages - Occupies only 5 m² of space Ideal for workshops with limited space. - Easy clamping and programming Fast and intuitive operation, even for less experienced users. - Compact, powerful, and fast Perfect for smaller workshops seeking professional results. Advanced Features - Glue and dowel insertion unit - 12 kW milling unit (up to 24,000 rpm) - Automatic workpiece length measurement - Automatic tool changer (linear tool magazine with 4 positions) - Drilling from all five sides - Groove cutting with integrated saw blade - Processing from all four sides of the workpiece - Door panel machining Bwsdpewyvgasfx Ah Heh Drive Unit - Spindle: HSK F63 - Number of axes: 3 Travel Distances - X-axis travel: 3000 mm - Y-axis travel: 950 mm - Z-axis travel: 80 mm Tools - Maximum tool weight: 7.5 kg Worktable - Table load capacity: 130 kg Additional Equipment - Online remote service support package - Automatic central lubrication PRICE EXCLUDES VAT.