Used Fraes Fritz for sale (98)

Condition: used, pressure ca. 5 t dayligth 110 mm throat 40 mm weight of the machine ca. ca. 50 kg dimensions of the machine ca. 1,2 x 0,5 x 1,3 m 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Gjdpjxr Ravofx Aadstu Machine dealer with own stock of 1600 m².

Condition: used, tank capacity: 80 l, 80 liter pressure tank made of V4A Godpfx Aaeyfwmkodstu

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min Gtjdpowv Havefx Aadsu - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Gjdpfx Aajxl Elysdstu

Year of construction: 1973, condition: used, grinding length 1600 mm centre height 185 mm diamter spiral cutter 55mm mm indexing 4-32 Modul length 5900 mm width 2300 mm height 2000 mm weight 7 t Godpjpid Ivofx Aadotu

Condition: good (used), Tailstock make Fritz Werner Tip height adjustable maximum tip height 150 mm Godpfxjd Hurio Aadotu minimum tip height 130 mm Foot width 180 mm Base depth 115 mm Width of the Paß stone 14 mm Weight 10 kg Shipping dimensions: L. 210 x B. 120 x H. 140 mm

Condition: ready for operation (used), Weight: 2.2t, including documentation. Gtedpfx Aajmqly Uedsu

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head Godpfxjdna Aco Aadjtu -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner Gtsdpfxon Atchj Aadju type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm Godsb A Nu Rspfx Aadotu -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm Gtedpfx Aaob A Rctsdeu -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Gtsdpfx Aaou Ndf Iodeu Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Godpfx Aaou N D Szjdotu Rotary table conventional *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm Gtodpfx Aaou N Ebdsdsu table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: good (used), functionality: fully functional, -KOM 2051- On offer here is a set of struts, upright frames and crossbars. The individual modules are in good condition. Dimensions: Small stand frame: approx. 3800 mm x approx. 850 mm (approx. 40 pieces) Large upright frame: approx. 4200 mm x approx. 850 mm (approx. 12 pieces) Bracing for pallets: approx. 850 mm x approx. 140 mm (approx. 80 pieces) Cross beams: approx. 2750 mm x approx. 230 mm (approx. 25 pieces) Stand frame special dimensions: approx. 3050 mm x 735 mm (6 pieces) Technical information: The maximum load per bay is 1500 kg. The maximum load per bay is 6000 kg. ATTENTION: the last picture only illustrates a possible assembly of the heavy-duty shelving and does not claim to be complete. The crane system is not part of the package. Gjdou Nyl Rjpfx Aadstu

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Including 3 inwardly stepped jaws Gtodpswx H Irsfx Aadou Space required: 500 x 500 x 300 mm

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Z-axis (vertical movement) 385 mm Clamping table : Clamping surface 315 x 1250 mm Table load 1000 kg Gsdpfxotvfwcj Aadjtu Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders * Operating instructions

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Gtodpfxolxyhfs Aadeu a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Gtedpfx Aajrt H Izjdeu Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Gtedjdrtalepfx Aadeu each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Gtedpfxjw Ivp No Aadeu

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy. Gtjdpfx Asw Ivr Deadou

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Gtjdpfjw Ivrqox Aadeu Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Gsdpfx Asw Ivqgoadstu

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Gtsdpfx Aajw Ivpvedeu