Used Gantry Milling Machine for sale (65,786)

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons - Coolant system in the machine base Ledpfx Afozupamewerr Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: used, Year of construction: 1988, tool adaptor SK 50 digital ja Lrodpfsztfyaox Afwjr head swivability ja ° automatic dividing head ja x-travel 1000 mm Weight 3 t

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Lodpfx Aezr Hrzjfwerr feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Lsdpfx Afjzvv Uasworr Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location Lrsdpfszvv T Ajx Afwsr

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Ledszvv Tpspfx Afworr Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Lrjdpfx Afozvv Tiower Coolant system Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Lredpozvv S Sefx Afwer Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Lodpfezvv S Esx Afwjrr Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Lsdpozvv Sxsfx Afworr Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control Andronic 3D path control with Ethernet interface Ljdpezvv Srefx Afworr Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5,000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3,500 kg Price: Euro 4,500.00 (plus VAT), ex works.

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Lrodpfx Ajzvv Sljfwor Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Lrjdpfezvv R Uex Afwer

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Lredpfx Afszknwcowor Travel Z-axis: 1300 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, table length: 400 mm, table width: 800 mm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Lredpfx Afjzfxubswer Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feeds: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirements L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: Lrjdoilg H Eepfx Afwer - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you on site while it is running. All information is subject to change without notice. Subject to prior sale. The item is sold as is, with no warranty of any kind. This exclusion does not apply to claims for damages resulting from gross negligence or willful breach of the seller's obligations, or to any injury to life, limb, or health.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis Lrsdsw U Tlzepfx Afwsr HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min Lsdpfx Ajzru Hasfwerr weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M Lodjzruwlopfx Afwjrr * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Lodpfszrt Rksx Afworr

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm control: Heidenhain TNC 121 spindle taper ISO: SK 40 quill stroke vertical: 120 mm spindle head swivable left - right: je 90° ° turning speed range: 40 - 1.600 U/min throat of the milling spindle: 200 mm table surface area: 1.050 x 627 mm table swivable approx.: +45/ -45 Grad table rotating: 360 Grad table movement - horizontal: 200 mm table feed: X/Z 5 - 5.000 mm/min Ledpfx Aszibabsfworr table feed: Y 2,5 - 250 mm/min total power requirement: 8 kW weight approx.: 3,2 kg dimension machine approx.LxWxH: 2,3 x 2,0 x 1,850 m The MAHO MH 800 is a high-quality conventional universal tool milling machine designed for precise milling, drilling, and machining operations. It is ideally suited for toolmaking, mechanical engineering, fixture construction, as well as the production of individual components and small production batches. *

Condition: good (used), Year of construction: 1988, functionality: fully functional, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, table width: 228 mm, table length: 1,066 mm, input voltage: 400 V, Bridgeport 2HP Milling Machine Spindle speeds 60-4200rpm 42" x 9" Table 2 axis DRO Coolant pump & system Work light Spindle taper R8 Lrjdezl Tm Eepfx Afwsr

Year of construction: 2011, condition: excellent (used), Conical milling machine for orthotics and prosthetics Suitable for the precise and easy production (grinding, milling) of prostheses or other orthopedic work. Stepless speed control of the spindle up to a maximum of 3500 rpm. Connection adapter for 5/8" tools. Lrjdezu Trtjpfx Afwer Working height 1000 mm. Work light. Motor power 1.5 kW. The machine is equipped with a brake motor. Connection voltage 230V - no high-voltage connection is required. Adjustable dust extraction hood. Emergency stop button with restart protection. Good technical condition. Year of manufacture 2011. Weight 120 kg.

Condition: good (used), Year of construction: 1974, functionality: fully functional, * 3-axis digital readout (Heidenhain) Lredpfx Aozrm Snofwer * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device * Machine light * Anti-vibration mounts x-travel 500 mm y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 spindle turning speed range 40 - 2000 rpm feeds longditudinal/cross/vertical 10 - 500 mm/min rapid traverse 1500 mm/min main drive 3 kW weight of the machine approx. 1,3 t Transport dimensions: The machine is loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Lredpfszffnujx Afwer Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg