Used Groove Milling Machine for sale (65,280)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Djdpfjxxb Rrsx Al Sewc Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: Dedpfx Aljx D Tbms Sswc 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL Dwsdpez Eh Egjfx Al Sjc TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Djdszuxn Tspfx Al Sowc Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Dodpfx Aoz Ekkxsl Sewc Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: good (used), Year of construction: 2006, functionality: fully functional, Rated power consumption 3000W (Cuprex high-performance motor), rated voltage 230V 50Hz, rated no-load speed 4050 rpm, milling head 15 x 115 x 30 mm, cutting depth 0-70 mm (83.5 mm), swivel range 0-60°, weight approx. 20 kg, cutting speed 31.8 m/s. Dsdpfxjzvyb Do Al Sjwc

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Dsdoy Ni Ivopfx Al Sjwc Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Mikron WF 41C CNC Universal Milling and Drilling Machine Professional, extremely robust CNC universal milling and drilling machine MIKRON WF 41C Due to its stable design, the machine is ideal for workshops, prototype construction, maintenance, or demanding toolmaking. The machine is equipped with the proven HEIDENHAIN TNC 155 path control system. Thanks to its clear-text dialogue guidance, it can be programmed extremely easily directly on the machine, supports graphic simulations, and allows easy loading of external CNC programs via the serial interface (ideal for CAD/CAM applications). Technical data at a glance CNC control Model: HEIDENHAIN TNC 155 Operating modes: Manual operation (like digital display), positioning with manual input, single block, sequence of blocks, program test (graphic simulation) Interface: V.24 / RS-232-C for data transfer Feed drives & travels Travel in X-axis (table longitudinal, automatic): 630 mm Travel in Y-axis (spindle carriage transverse, automatic): 500 mm Travel in Z-axis (table vertical, automatic): 460 mm (p. 1) Feed rate: continuously adjustable from 1 – 3000 mm/min in all 3 axes Rapid traverse rate: X and Y axes: 6000 mm/min | Z axis: 4000 mm/min Max. vertical installation height: 559 mm (between vertical milling head and rotary table) Dwsdpfszcqf Isx Al Ssc Milling spindle drive Working spindle speeds: 21 gear stages Speed range: 31.5 – 3150 rpm Spindle motor power: 6.0 / 8.0 kW Tool holder: ISO 40 / M 16 with draw-in groove (SK 40 DIN 2080) Arbor movement (vertical): 90 mm Table geometry & workpiece capacity Rotary table clamping surface: 500 x 1000 mm T-slots: 7 pieces (distance: 63 mm, width: 14-H7 mm) Clamping surface perpendicular: 397 x 550 mm (with 4 x 4 threaded holes M16, distance 90 mm) Max. recommended workpiece weight: 500 kg Electrical system & cooling Electrical connection power: 13.5 kW Coolant tank volume: approx. 100 liters Dimensions & weights Net machine dimensions: 1745 mm (L) x 1501 mm (W) x 2124 mm (H) Max. space requirement during operation (including control console): 2930 mm (L) x 2115 mm (W) x 2125 mm (H) Machine weight (net): 3100 kg (including vertical milling head and rotary table) Product video “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Huron SXB 523 CNC Bed Milling Machine Heidenhain CNC control Dodsz Hdvkspfx Al Sswc Year 1991 Table 110" / 2794mm x 24" / 609 7,716lbs / 3499kgs max table load 78.7" / 1998mm X travel 59" / 1498mm Y travel 33.5" / 850mm Z travel 30-3000RPM spindle 30 ATC 3 Axis

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Dwsdpfoz Ixkrjx Al Sec Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: excellent (used), CATALOGUE NUMBER 7227 TECHNICAL DATA - working width 40 – 300mm - material thickness 10 – 35mm - min. material length 270mm - max. material length, no restrictions - max. feed rate 90m/min - feed rate continuously adjustable via a frequency inverter on the control panel - cutting speed 24m/min - milling motor power 2x4kW - milling cutter speed 7500rpm - feed motor power 0.75kW - pneumatic pressure from above and from the sides - spindle diameter 40mm - motor-driven infeed conveyor with a length of 1130mm - manual / automatic control Dwsdpjzrvccefx Al Sjc - PLC controller with a touchscreen for easy operation - compressed air connection 8 bar - dust extraction nozzle diameter 150mm - dimensions (L/W/H) 2550x1200x1400mm - weight 1100kg ADVANTAGES - German production - technical documentation (DTR) - machine for tongue-and-groove profiling - complete set of milling cutters and heads included - motor-driven infeed conveyor - unpainted - used machine, very good condition Net price: 107900 PLN Net price: 25100 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Dodpszmt U Esfx Al Sjwc

Condition: ready for operation (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 470 mm, spindle speed (max.): 1,680 rpm, spindle speed (min.): 30 rpm, overall weight: 1,700 kg, input voltage: 440 V, Huron J2 Milling Machine Excellent running condition Table size 1050 x 350mm Longitudinal traverse 750mm Cross Traverse 500mm Dodpfxoz Ix Eio Al Sswc Vertical Traverse 470mm Spindle Taper Int 40 Spindle speeds 30-1680rpm 3phase 400v Motor 4kw 3 Axis DRO X, Y & Z Axis Coolant pump & system Weight 1700kg

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: Dwjdjz Ixlvepfx Al Ssc CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: good (used), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction at this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Dwsdpfxogyw S To Al Ssc Number of steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Dwjdjz E Rymepfx Al Sec Contact us for shipping options! €2,650.00

Condition: used, Year of construction: 1980, functionality: limited functionality, machine/vehicle number: 4119, travel distance X-axis: 1,450 mm, travel distance Y-axis: 365 mm, travel distance Z-axis: 415 mm, total width: 3,400 mm, total length: 4,200 mm, overall weight: 3,500 kg, Last major overhaul in 2006 Swiveling spindle head, 360° Control: Digital display Clamping area: 1800 x 400 mm Table load: 1000 kg Travel in the longitudinal direction: 1450 mm Travel in the transverse direction: 365 mm Travel in the vertical direction: 415 mm Spindle connection: SK40 Spindle speed: 31.5-45-63-90-125-180-250-355-500-710-1000-1400 rpm Feed rate in the longitudinal direction: 8-1200 mm/min Feed rate in the transverse direction: 8-1200 mm/min Feed rate in the vertical direction: 4-600 mm/min Spindle drive: 7.5 kW Feed motor: 3.2 kW Coolant pump: 0.18 kW Hydraulic system: 0.37 kW Total connected load: 12 kVA Weight, approx.: 3500 kg Space requirement, approx. (L x W): 4200 x 3400 mm Dedpfx Aez Nfbzsl Sowc Technical data subject to change without notice. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control system Andronic 3D path control with Ethernet interface Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Dodpfx Aljz Ixkfj Sswc Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 3,750.00 (plus VAT), ex works

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Dsdpfxsz Ixi Uo Al Sowc Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Dwjdpfsyahv Ssx Al Ssc Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Automatic creasing machine with feeder Year 2014 Infeed width up to 330 x 450 mm 12 programmable lines with a minimum spacing of 1 mm and a crease line of 1.2 mm Dwedpfx Alez N Hp Hj Soc Digital colour TFT display with all data visible at a glance Power supply: 220 V, 50 Hz, 1.5 amps, with ground wire

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours Dodpfx Aoz Izdusl Sowc EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: refurbished (used), Huron NU5 Universal Milling Machine Ex University Superb Condition Table size: 1,635 × 460 mm Longitudinal travel – X: 1,300 mm Cross travel – Y: 700 mm Vertical travel – Z: 500 mm Spindle taper ISO 40 Spindle-speed range 30–2,066 rpm Table-feed range: 1.6–820 mm/min Rapid traverse – X/Y/Z: 2,800 mm/min Maximum head-to-table distance: 649 mm Main motor: 8.7 kW / 11.7 hp Machine dimensions : 2,361 × 2,500 × 1,648 mm For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79260 Machine Serial Number: 5568 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dedpfx Alsz D Dlys Sowc Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. Djdpfew U Tlzjx Al Sowc CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Djdozcqcgspfx Al Sowc Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!