Used Gas Heating Dark Spot for sale (15,896)

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 30,000 liters Fpjdpfxevm Uvno Ag Hsf Diameter: 2,000 mm Length: approx. 9,9400 mm Weight: approx. 5,200 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need any further information, just call us or send us an email. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate) double-walled, for above ground storage, with saddle feet, 1 dome, optical leakage warning device, limit value transmitter and complete tank fitting consisting of: - Filling pipe 3" with TW-lock - dipstick pipe 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hour) - 1 vent pipe 2" with vent cap. Tank is equipped with the above fittings at the factory and is cleaned on the inside. Capacity: 80.000 liters diameter: 2.900 mm length: approx. 12.780 mm Weight: approx. 15.750 kg The tank can be repainted in the RAL color of your choice and optionally equipped with a ladder incl. operating platform. A cost-effective delivery with our own truck is possible. Just let us know the place of delivery and you will immediately receive the exact freight costs. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us for this. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 100,000 liters. Tank and apparatus Barth Ltd. Werner-von-Siemens-Str. 36 76694 Forst Tel: 07251 / 915119 Fpjdpehvidgefx Ag Hof Fax: 07251 / 915175

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 25,000 liters Diameter: 2,000 mm Length: approx. 8,400 mm Weight: approx. 3,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. Fpodpfxjvm Uuwe Ag Hef If you need any further information, just call us or send us an email. Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: refurbished (used), Used storage tank made of steel according to DIN 6616/2, (with test certificate), double-walled, for above-ground storage, with saddle feet, 1 dome, optical leak warning device, limit value sensor and complete. Tank fitting consisting of: - Filling pipe 3" with TW closure - Dip tube 1" with dipstick - Suction combination Euroflex 3 (max. 150 l/hr.) - 1 vent nozzle 2" with vent cap. The container is equipped with the above fittings at the factory and is cleaned inside. Contents: 16,000 liters Diameter: 2,000 mm Length: approx. 5,475 mm Weight: approx. 2,500 kg The container can be given a new coat of paint in your desired RAL color and optionally equipped with a ladder including operating platform. A cost-effective delivery with your own truck is possible. Simply tell us the delivery location and you will immediately receive the exact freight costs. If you need further information, just call us or send us an email. Fpjdpfjvm Urvex Ag Hef Trade-in and purchase of Tanks/containers are possible, just contact us. Delivery time by arrangement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: excellent (used), Year of construction: 1999, Water-cooled shielding gas welding machine MIG-MAG DALEX VARIO MIG 400 L (W) with wire feeder DALEX DV-36 L(W) Fpodpjyrgu Rsfx Ag Hsf Welding current range: 10 – 400 A Accessories / Special Features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roll wire feed • LCD display • Includes torch hose package, pressure regulator, and grounding cable For more technical data, see the pictures! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, mileage: 259,000 km, power: 190 kW (258.33 HP), first registration: 01/2007, fuel type: gasoline, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro5, number of seats: 3, total length: 7,200 mm, loading space length: 4,500 mm, loading space width: 1,780 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention! Sale preferably to business customers only. Internal ID number: [3198] ----Optional add-ons: * 12 to 64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available with or without down payment * Tow bar retrofitting available on request * Spring offer: If desired, towing capacity can be increased up to 3,500 kg for an additional cost of only €999 (vehicle- and manufacturer-dependent). ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately ready for use * Large 3.6-litre petrol engine * LPG gas system (90-litre tank) * XXL Maxi version with extra-long wheelbase + high roof * Cruise control * Auxiliary heater * Automatic climate control * Navigation system * Reverse camera * Comfort driver's seat * Tow bar Special equipment: Passenger airbag, exterior temperature display, 100 Ah battery, additional (reinforced) battery, rear door/tailgate windows with wiper/washer system, 180 A alternator, rear door (270-degree opening angle), plywood flooring in load compartment, partition wall with window, Parktronic System (PTS), spare wheel fitted, spare wheel holder under rear frame incl. jack, interior rear-view mirror, rear mudflaps, front mudflaps, comfort suspension seat (driver & passenger side), rear stabilizer, reinforced front stabilizer, sender unit for auxiliary heating, isolating relay for additional battery, rear door step, auxiliary (hot water) heater. Additional features: Third brake light, driver airbag, washer fluid-level indicator, electrically adjustable and heated side mirrors (both sides), mirrors with integrated indicators, brake assist, headlining in cab, lockable glove compartment, body/build: standard high-roof panel van, childproof locks, main fuel tank 100L, load securing / lashing eyes, headlight range adjustment, engine 3.5L - 190 kW V6, wheelbase 4,325 mm, low-emission according to Euro 4 Gr. III, right side sliding load/passenger compartment door, 6.5x16 steel wheels, Assyst maintenance interval display, heat-insulating glazing, permissible gross weight 3.50 t ----Leasing or financing required? We offer attractive terms – even with no down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: Fjdpfxjyqlpke Ag Hepf All information provided online is non-binding and serves only as general vehicle description. Errors, misprints, and prior sale excepted. The binding vehicle specification is determined solely by the purchase contract on site or by written confirmation. Vehicles with more than 50,000 km mileage or older than 3 years are preferably sold to our business clients.

Condition: ready for operation (used), DALEX welding unit CGW 405 Wire feeder DV 2.3 Hose adapter 10 m Connector of the hose package must be re-clamped Weight 310 kg Fjdpfjipvrfsx Ag Hopf

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 7903P, type of input current: three-phase, Equipment: type plate available, Spot welding tongs with built-in thyristor-controlled timer, with current regulation, with compensation, 6 kVA, water-cooled Fpodpfx Agjxqf Hze Hjf

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Fjdpfx Agotdnnme Hjpf

Condition: excellent (used), functionality: fully functional, Heidebrenner stool cooker gas burner Model: AKO 70 Gas burner 1 flg. stainless steel version with chassis Fpodpfjhq Hn Tex Ag Hef for bottles of gas Nominal heat load 5.8 kW Dimensions: 410 x 410 x 850 mm, WxDxH Used device cleaned Come to our large bakery machine warehouse and find your machine!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total width: 440 mm, total length: 450 mm, total height: 850 mm, input frequency: 50 Hz, DGUV certified until: 04/2027, TOP warming cabinet Fsdpfsvdkuujx Ag Hopf Temperature adjustable up to 90°C Stainless steel construction Dimensions: 440 x 450 x 850 mm (W x D x H) Connection: 220V, 750 watts Used unit, cleaned Many more bakery machines in stock!

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, 1998 CPV 20FT swap body tank container 31,180L / 1 compartment bottom discharge UN PORTABLE, T11 AMKD steam heating inspection valid for 2.5 years/CSC until 08/2026 = Further information = General Information Year of manufacture: July 1998 Model year: 1998 Usable material: Chemicals Weights Fpsdpfx Aoytpzvjg Hef Empty weight: 4,100 kg Payload: 29,900 kg Gross weight: 34,000 kg Functionality Loading compartment volume: 26,000 l Superstructure brand: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A Fsdoynh E Aepfx Ag Hspf - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Fpsdpfx Agjk S Dt To Hof Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), Coat & Fry fryer was previously being used on a crisp pellet and producing 400kg per hour. upgraded electrics. Fsdpjymr Tbsfx Ag Hopf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Rated power at 50% duty cycle: 20 kVA Max. welding power: 40 kVA Throat depth adjustable from 280 to 550 mm Electrode stroke: 15 to 85 mm Welding capacity for steel sheet approx. 4 + 4 mm Electrode force adjustable up to 240 daN Fedoyv Aqwepfx Ag Hspf Cooling water flow: 3 l/min Weight approx. 122 kg Welding controller T 90 Mark II Operating instructions and manual included Work stroke triggered via pneumatic foot pedal

Condition: excellent (used), Viessmann Vitomax heating boiler 2100 kW. Fpjdpfxjyzct Ns Ag Hsf

Condition: used, mileage: 173,322 km, power: 199 kW (270.56 HP), first registration: 01/2016, fuel type: gas, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: liquid petroleum gas (LPG), brakes: intarder, color: orange, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, loading space length: 7,410 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 9.360 kg Carrying capacity: 9.640 kg GVW: 19.000 kg Fjdpfxew N Rpts Ag Hspf

Condition: good (used), Year of construction: 2019, dimensions: (29+23) x 3.6 x 4.3 meters. With 11 heating zones and 9 heating zones, rated temperature 650°C and 250°C. Gas heating power 3780 and 1330 kW. Rated power 240 and 190 kW. Fpjdpfx Ajyzy Epsg Hof

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: G21SJ24073154650, WAREHOUSE SALE – REQUEST SPECIAL PRICE! The iCombi Pro is the latest combi-steamer from RATIONAL. The iCombi Pro 20-1/1 Gas model with 20 GN 1/1 rack positions is easy to operate, even for untrained staff, as it delivers outstanding food quality without the need for constant supervision. Ultra-fast interim and self-cleaning functions keep your unit spotless. The appliance has been tested in our in-house workshop and is fully operational. You will receive an invoice with VAT shown separately. Photos are current and show the actual unit for sale. The combi steamer is available immediately. Service: We can arrange for certified Rational customer service throughout Germany. Looking for a specific Rational appliance type? Ask us – we have access to an extensive range of used and new stock. We offer expert advice on all types of units, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our appliance services for you: • 6-month warranty on all electrical components • High-quality brand equipment at fair prices • Professional and competent advice – before and after the purchase • Flexible options for shipping or self-collection • Provision of user manuals, wiring diagrams & spare parts Fjdpfsx Dtkzox Ag Hspf • Full accessory program at attractive prices Condition: Used, tested, and fully functional Technical Data: • W x D x H: 877 x 913 x 1872 mm • Minimum doorway for transport W x H: 900 x 1900 mm • Serial No.: G21SJ24073154650 • Year of manufacture: 2024 • Max. loading per rack: 5 kg • Max. total loading: 100 kg • Weight (gas unit): 273 kg • Electrical connection: • Voltage: 1 NAC 230 V • Gas connection load: 42 kW • Fuse: 63 A • Water connection: • Water inlet (pressure hose): 3/4 inch • Water drain: DN 50 Further specifications: • Temperature range: 30°C to 300°C • Senses current cooking chamber conditions • Detects size, loading quantity, and product condition to optimize browning • Learns commonly used cooking habits and implements them • Determines the ideal cooking path for desired results • MyDisplay – customizable, user-specific control interface • TFT color display and touchscreen • User manual and operating instructions accessible on the unit display • Core temperature probe with automatic error correction for misplacement and positioning aid • Glazed, energy-saving door compartment • LED interior lighting • Includes energy consumption display • Humidity control: precise measurement and adjustment by percentage • Individual programming of at least 350 cooking programs with up to 12 steps each • 3-level adjustable steaming function • USB interface • High-performance fresh steam generator with automatic descaling • 5 programmable fan speeds Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: used, functionality: limited functionality, load capacity: 4,500 kg, Manufacturer: STILL GmbH Model: R70-45T Machine type: Forklift truck / counterbalance forklift Year of manufacture: 2001 Serial number: 517086000097 Load capacity: 4,500 kg Unladen weight: 6,622 kg Fpedpfxeyr Sqds Ag Hof Permissible total weight: 11,300 kg Permissible front axle load: 9,500 kg Permissible rear axle load: 3,650 kg Drive: LPG (propane) Gas tank: Rear-mounted LPG tank Cabin: Operator cab Operating hours according to meter: 27,889.4 h Note: The fork carriage is bent and requires repair. Condition: used, with signs of wear

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 03.010.00, clearance between the columns: 1,620 mm, table width: 1,600 mm, table length: 1,800 mm, ram plate width: 1,600 mm, ram plate length: 1,800 mm, overall weight: 22,000 kg, stroke length: 1,800 mm, pressing force: 200 t, Try-Out Press with Injection Unit – Manufacturer: Reis – from Automotive Production For sale is a try-out press with integrated injection unit from Reis. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been carried out regularly. The system is currently under power and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in excellent technical condition and has been well maintained. It is particularly suitable for precise spotting and adjustment work in tool and mould making. Viewing is possible at any time by appointment. Dismantling and loading are the responsibility of the buyer. On request, we can provide dismantling, loading and transport arrangements at additional cost. Below are the technical specifications of the offered machine: ##### Technical Data + Information: TUS 160 OK – 200 ####General Information - Designation: Try-Out Press with Injection Unit TUS 160 OK - 200 - Type: Vertical / Column Type - Manufacturer: REIS - Serial No.: 03.010.00 - Year of manufacture: 1981 - Total weight: 22 t ####Press Force - Press force (Ram): 200 t - Press force (Ejector): 30 t - Operating pressure: 200 bar - Accumulator: No. 05015 ####Machine Body - Design: 4-column / sheet frame - Hydraulic cylinder: 1 - Diameter: Ø 360 mm - Arrangement: vertical, top mounted ####Table - Table size: 1800 x 1600 mm ####Clamping Table T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ram Maximum stroke: 1800 mm Retraction force: 70 t ####T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ejector Fsdpfoyluivsx Ag Hopf - Ejector stroke: 190 mm (over clamping plate) ####Pump - Power requirement: 22 kW - Flow rate: 122 l/min - Speed: 1450 rpm (Try-Out Press, Spotting Press, Test Injection Press, Hydraulic Press, Hydraulic Press Machine) ##### Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety standards as they fully comply with Brazilian national safety directive NR 12, which builds on these. Our core strength is custom machine building and press automation. We offer bespoke hydraulic presses, press brakes and guillotine shears at surprisingly competitive prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Fedpfx Ajyma Nwjg Hspf Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2021, – Year of manufacture 2021 (the machine has never been used) – Capacity 20 kVA – Pneumatic – Control TE101 Fpsdpfx Agjytr N Ns Hjf – Cooling – Documentation – 400V

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 423, roller width: 800 mm, We are offering this heating press from 1976 for sale. The press was in use until recently for vulcanizing tread segments for retreading wheel loader tyres. Included are also a considerable number of mould segments ranging from 420 to 750 mm in width. The press is electrically heated and has complete safety documentation. The heating surface is approximately 800x1100 mm. If you have any questions or require further information, please feel free to send us a message or call us. Fpodox Nqlvjpfx Ag Hsf