Used Gildemeister Gd 16 for sale (238)

Condition: ready for operation (used), Gildemeister VD030K AES2 card + Gildemeister 0.88.630-0 SI0ADP additional board, used, normal signs of use, 100% functional, scope of delivery as per photos Rbjdotztftepfx Aaajw

Condition: ready for operation (used), Gildemeister 9.635.839 High Board 25-355 , serial no. according to photo, used, normal signs of wear, 100% functional Rbsdpei D U Tgofx Aaaow

Condition: ready for operation (used), Gildemeister VAP4 / VAP 4 AES 1 / 0.881.051-2 card SN 5899090, used, normal signs of use, 100% functional, scope of delivery as per photos Rbjdpstztfgefx Aaajw

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister) , serial no. according to photo ,used, normal signs of wear, 100% functional Rbsdpfxoi D Un Ro Aaaew

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rsdpfxswym Nfs Aaasbw Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2008, Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Tool holder Number of tool stations: 12 Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Rjdpfjya Iirsx Aaaebw Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Coolant unit Contents: 210 l Pump capacity: 1,7 kW Feed rate at 6 bar: 20 l/min Electrical energy requirement Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: used, Year of construction: 2008, weight of the machine ca. 8,8 t dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Rjdeyat Hvspfx Aaajbw X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm C-axis Rbodpfxjvuqm Ss Aaaew Number of work stations: 12 Videos available!!

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Siemens 840 D Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW Redpfxew Slfbo Aaaobw * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

Condition: excellent (used), Year of construction: 1998, CNC Lathe Gildemeister CTX 200 E Year of manufacture: 1998 Heidenhain CNC Control Technical Data: Rbsdow I Swcopfx Aaaow CNC Control: Heidenhain Maximum turning length: 350 mm Maximum turning diameter: 160 mm Maximum bar diameter: Ø 42 mm Tool turret capacity: 12 positions (driven) Maximum spindle speed: 5000 rpm Spindle drive power: 7.5 kW Equipment of the CNC Lathe: Chuck spindle Driven tools Bar feeder: IEMCA VIP 70 CNC Tool holders and jaws

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Rbedpfx Asw Tarfjaaew Technical data: Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Number of tools: 40 Tool length / Max. quantity: 350/40 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,567 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 678 mm, bar passage: 70 mm, controller model: Fanuc 310i, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X1 travel: 165 mm Y1 travel: 80 mm (+50/-30 mm) Z1 travel: 678 mm X2 travel: 165 mm Z2 travel: 640 mm Main spindle Max. speed: 5,000 rpm Max. bar capacity: 70 mm Draw tube bore: 75 mm Torque: 191 Nm Power: 20 kW Sub-spindle Max. speed: 5,000 rpm Draw tube bore: 42 mm Torque: 108 Nm Power: 17 kW Turret 1 & 2 Tool stations per turret: 12 live Live tools: 4,000 rpm MACHINE DETAILS Control: Fanuc 310i Number of controlled axes: 8 Dimensions & Weight Machine dimensions: 4,400 mm x 2,000 mm x 2,300 mm Machine weight: 8.8 t Chip conveyor weight: 750 kg Operating Hours Automatic mode: 23,567 h Power-on hours: 51,273 h Rbedpfx Aajx Af Dksaow EQUIPMENT Chip conveyor 2 x collet chucks Parts conveyor Extraction unit Bar feeder FMB Turbo 8-80 / 3200

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mm Turning length : 650 mm In General: Year of construction:2007 Control:Siemens 840 D Bar capacity:65 mm Turning diameter:350 mm Turning length:650 mm Main spindle: Technology:Motor spindle Speed:5,000 rpm Power max.:35 kW Torque max.:370 Nm C-axis:0.001 Bar capacity:65 mm Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:26 kW Rsdpfxoyamflo Aaasbw Torque:290 Nm C-axis:0.001 Chuck:Hainbuch Spanntop size 65 Clamping cylinder:Partial hollow clamping cylinder Z-axis:670 mm X-axis:175 mm Tool carrier i (X/Y/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:300 Y-axis:80 mm ( +/- 40 mm) Z-axis:650 mm Tool carrier II (X/Z): Technology:Tool turret, 12 stations Tool holder:VDI 30 Tool drive:4,000 rpm, 11 kW, 28 Nm X-axis:180 Z-axis:650 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system Measuring systems:Direct in all X-axes (glass scales) Bar loader:IRCO Breuning Part removal:Finished part gripper + indexing belt Emulsion mist separator:Mechanical Set-up mode:Electronic handwheel

Condition: ready for operation (used), Gildemeister 852.14.00-00.21 card (851.75.00-00.21), used, normal signs of use, 100% functional Rsdpfxoi D U S Ue Aaajbw

Condition: used, Year of construction: 2007, turning diameter 246 mm turning length 445 mm control Fanuc 32 weight of the machine ca. 4250 kg Rbodpoxuv R Sefx Aaajw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, TECHNICAL DETAILS: Manufacturer: DMG Gildemeister Model: NEF 400 Year of manufacture: 2009 Control system: Heidenhain Power supply: 400 V / 50 Hz Connected load: approx. 21 kVA Rbsdpfx Aoyxqa Ejaasw Current: 31 A Control voltage: 230 V / 24 V Cable specification: L ≤ 5 m, 230 V – 150 W Made in Europe

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH Redpfx Aasglf A Heaobw

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Rbjdpovn Rlzofx Aaasw Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Immediately available from stock

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA weight of the machine ca. 5,7 t Rbjdpfx Asx I Sfnjaajw dimensions of machine L x W x H 3,65 x 2,03 x 2,1 m Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 Rsdpfxeydfllo Aaajbw turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. Redpfjwf D Szox Aaajbw The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. Rodjwgi D Eepfx Aaaebw The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> Rbodpfx Aaowf D S Isaow This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: good (used), Center height 260 mm Rsdsralkmopfx Aaaebw Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Spindle bore: 73 mm Rsdpfxsxn I Sbo Aaaebw MACHINE DETAILS Control model: ELTRO MPULS