Used Gildemeister Gdm 90 for sale (229)

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Nwedstzyx Tepfx Ah Usr Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: ready for operation (used), Year of construction: 2005, 1 unit of used CNC lathe with driven tools and Y-axis. Siemens control. Nwjdpfx Ahewz Sgfj Usr

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed 560 mm Nwodpfx Ahsvn Rlze Ujr Swing diameter over cross slide 250 mm Spindle bore 65.3 mm Power Max. 15 KW Speeds 11.2 - 2,240 rpm Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Incl. chip conveyor Incl. complete documentation

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Nwedpsw Em Dmjfx Ah Uer Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h EQUIPMENT - CNC control: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Condition: good (used), Year of construction: 2003, Manufacturer: DMG Gildemaster Nedevvx H Nopfx Ah Uewr Country of manufacture: Italy CNC control FANUC 16i-TB with 7 axes CE declaration of conformity Technical data - Number of axes: 7 - Number of spindles: 2 Travel paths: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel path: 120 [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm Driven tools: Power of the tool drives: 1.1 kW Max. speed: 6,000 rpm Bar loading magazine IEMCA SMART 316 Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2200 [kg] Spindle, counter spindle with new bearings!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 501628, spindle speed (max.): 4,500 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 280 mm, bar diameter (max.): 65 mm, spindle diameter: 79 mm, Machine package: 2 machines = 1 x functioning machine + 1x spare parts carrier TECHNICAL DETAILS Bar diameter (normal): 65 mm Main spindle Spindle head (flat flange): 140h5 mm Spindle bore diameter: 79 mm Clamping tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% ED): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% ED): 320 / 240 Nm Path speed for thread cutting (max.): 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Face path/longitudinal path: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X): 15 x 25 mm Threaded spindle pitch (X Ø Z): 15 x 32 mm Slide 2 Face path/longitudinal path: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Threaded spindle pitch (X Ø X/Z): 15 x 25 mm Tool carrier Number of tools: 8 Tool holder: Shaft Ø according to DIN 69880 Number of driven tool stations: 4 Power max. (40%/100% ED): 7.6 / 4.6 kW Max. torque (40%/100% ED): 24 / 14.7 Nm Max. speed (tool holder 1 and 2): 4,000 rpm Counter spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Nsdpevviwxofx Ah Uewr Spindle head diameter (flat flange): 120 mm Positioning device: stepless pitch MACHINE DETAILS Total length (with chip conveyor): 3,500 mm Total height (with control cabinet): 1,625 mm Total width (with control cabinet): 1,750 mm Weight of the machine including control cabinet: 5,000 kg Weight of the integrated bar loading magazine: 900 kg Hydraulics Contents: 9.8 l Pump power: 1.1 kW Coolant system Contents: 160 l Pump power: 1.65 kW Discharge rate at 8 bar: 25 l

Condition: used, Year of construction: 2006, Technical data: Working area: Max. swing diameter: 680 mm Swing diameter over X-guideways: 565 mm Chuck diameter: 250 / 315 mm Cross travel (X): 315 mm Longitudinal travel (Y): 1350 mm Headstock: Spindle diameter in front bearing: 150 mm Spindle bore: 107 mm Main drive: Main three-phase drive power: 36 / 45 kW Torque (100% duty cycle / 40% duty cycle): 600 / 750 Nm Speed range (100% duty cycle): 20 - 3200 rpm Speed range (40% duty cycle): 20 - 4000 rpm Tool turret: Number of tool stations: 12 Shank diameter: 50 mm Indexing time for 30°: 0.16 sec Tailstock: Tailstock quill travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill taper: MT 5 Coolant system: Nwodjwym Inspfx Ah Uer Capacity: approx. 220 l Pump output: 1.7 kW Delivery rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, approx.: 9500 kg Equipment/features: - CNC control SIEMENS SINUMERIK 840D powerline with Shop Turn - Single-row turret with 12 fixed tool stations - Hinged belt chip conveyor

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for Nwodjin Ub Tspfx Ah Uer the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, TECHNICAL DETAILS - Max. bar diameter : 12,7 [mm] - X stroke : 85 [mm] - Y stroke : 150 [mm] - Z stroke : 160 [mm] - Spindle speeds : 12000 [rpm] - Number of axes : 5 EQUIPMENT - CNC : Fanuc 18 i-T Nedpfxsuy Uywj Ah Uewr - Bar loader : IEMCA CH 220 Type 32 L - Oil mist extractor : LTA Basic line 01

Condition: used, Year of construction: 2001, operating hours: 43,698 h, turning diameter over cross slide: 570 mm, turning length: 635 mm, turning diameter: 570 mm, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, Equipment: documentation/manual, Turning diameter over bed: 570 mm Turning diameter over cross-slide: 420 mm X travel: 220 mm Z travel: 635 mm Tailstock travel: 550 mm Spindle power output: 21 kW Spindle RPM range: 25-5000 C-axis RPM: 100 C-axis increment: 0.04° Number of tool stations: 12 Tool clamping taper: VDI 40 Machine dimensions (LxWxH): 3210x1750x1750 mm Nwodpfx Ahexr U Sce Uer Machine total weight: 5300 kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS Chuck diameter: 250 mm X-axis: 800 mm Z-axis: 300 mm Nwjdpswrr T Tefx Ah Uer Spindle Spindle head: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm C-Axis Number of tool stations: 12

Condition: excellent (used), Year of construction: 2004, operating hours: 22,953 h, functionality: fully functional, machine/vehicle number: 0680000211, travel distance X-axis: 650 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, rotational speed (max.): 5,000 rpm, New PCU in 2018! TECHNICAL DETAILS Speed: 5,000 rpm Spindle motor: 20 kW Chuck diameter (KITAGAWA): 250 mm Control: Siemens Sinumerik 840D, POWER LINE Nodpfxovvii Uj Ah Uowr Travel paths X-axis: 650 mm Y-axis: ± 50 mm Z-axis: 300 mm Turret and tools Turret: 12 positions Tool holder: VDI 40 Tool speeds: 4,000 rpm Tool drive power: max. 11.7 kW MACHINE DETAILS Pallet conveyor: EWAB, loading station on the right Machine weight: approx. 8 t On-time hours: 34,982h Spindle hours: 22,953h EQUIPMENT - Measuring probe - Driven tools - C-axis - High-pressure pump with 20 bar, 500 l and double changeover filter - Immersion cooler for coolant - Electrostatic suction of LTA - Collecting tray under the machine - Kitagawa 3-jaw chuck B210 - EWAB pallet conveyor with loading station on the right - Chip conveyor

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm Nodpfx Ahstpn S Is Ujwr

Condition: ready for operation (used), operating hours: 31,819 h, turning diameter over cross slide: 290 mm, turning length: 600 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 645 mm, rotational speed (max.): 5,000 rpm, - CNC lathe with EPL 2 control, equipped with round magnet. It was last used for fine contour turning of hardened components. (without chuck, tailstock and chip conveyor) Technical data Swing diameter over bed: 300 mm Swing diameter over face: 290 mm Travel path X: 210 mm Travel path Z: 645 mm Speed range: 25 - 5000 rpm Nodpfx Ahoqcu Uvj Uowr Tool carrier: universal disk turret Tool positions: 12 Tool holder: 30 mm (DIN 69 880)

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Nwjdpfx Ahewzbq To Uer Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, Year of construction: 2002, turning diameter 16 mm Nwedpfx Ahjvh I Tvj Uer spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm Nwsdpfevuqm Sox Ah Uor C-axis Number of work stations: 12 Videos available!!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Hello, I am offering for sale a renowned brand CNC lathe: DMG GILDEMEISTER CTX 420 Linear V4 with C-axis, Y-axis, and driven tools. The machine is in excellent technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 420 V4 Linear Control: HEIDENHAIN 4290 + DIN PLUS interface for program generation Country of manufacture: Germany Year of manufacture: 2004 _ Machine specifications: - Turret: 12 tools with VDI 40 holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Y-axis - Driven tools - Max turning length on Z-axis: 635 mm - Max turning diameter on X-axis: 325 mm - Spindle chuck BERG, diameter 200 mm - Max bar diameter: 66 mm - Coolant system - Hydraulic tailstock, programmable - Chip conveyor Nwjdpfxsxcupce Ah Uer - Spindle drive power: 21 kW - LNS bar feeder - Documentation (DTR) - Machine weight: 6 tons _ WHY IS IT WORTH BUYING MACHINES FROM PPM? - We offer our own stationary and mobile service support - We have sold over 700 DMG machines - We can commission the machine at the customer's site - Operator training and delivery included in the price - All our machines undergo a professional technical inspection and are ready for operation - The machine can be purchased via installment plan or leasing.

Year of construction: 1998, condition: ready for operation (used), Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools. Njdpew Tl Ifofx Ah Uowr

Year of construction: 2002, condition: good (used), functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Nwjdpfon Uum Hsx Ah Ujr Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Nwodpfjxn R N Aex Ah Uor

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector Njdpovmy Icjfx Ah Uswr - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. Njdjtpuh Aspfx Ah Uswr - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE DMG GILDEMEISTER CTX 500 V3 with C axis and driven tools. The machine is in very good technical and visual condition. _ Type: CNC Lathe Manufacturer: DMG GILDEMEISTER Model: CTX 500 V3 Control: HEIDENHAIN 3190 + TURN PLUS overlay for generating programs Nwsdpfju Aauxox Ah Usr Country of manufacture: Germany Year of manufacture 1998 _ Machine parameters: - head: 12 - tools for VDI 40 holders (every second socket driven) - max. rpm 3500/min. - C axis - driven tools - max. turning length in the Z axis: 1150 mm - max. turning diameter in the X axis: 500 mm - BERG spindle holder Fi-315 mm - max. shaft diameter Fi-91 mm - cooling system - hydraulic tailstock - controlled from the program - chip conveyor - spindle drive power: 31 KW - DTR - machine weight: 9 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 Nodpfx Aetw U E Ujh Uowr - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841