Used Glass Table for sale (19,753)

Condition: used, Basic dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical data for the workbench: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,500 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,280 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used for locking / inserting chipboard Laodpfxotgkwms Al Nsc galvanized surface Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 2,500 x 600 mm / 2 levels / (221.00€ net) Workbench 2,500 x 700 mm / 2 levels / (229.00€ net) Workbench 2.500 x 800 mm / 2 levels / (238,00€ net) Workbench 2,500 x 1,000 mm / 2 levels / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 levels / (259.00€ net) Workbench 2,500 x 1,100 mm / 2 levels / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 levels / (271.00€ net) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Included in the scope of delivery: 01x Workbench, used Subframe dimensions: approx. 1,340 x 700 mm Height to top edge of worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Comprising the following for EACH unit: 02 x Workbench stands, used Manufacturer: Dexion Type: P 90 Material color: sendzimir galvanized Profile dimension: 100 mm Including cross and diagonal braces, base plates The stands are pre-assembled Lsdpex Itdlefx Al Noac (bolted truss construction) 900 mm high 700 mm deep 04 x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08 x Dexion safety pins, used Type: Speedlock P90 Material color: sendzimir galvanized Head Ø: 13.58 mm Pin Ø: 5.92 mm Weight per piece: 0.018 kg Chipboard panels, 2nd grade, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Surface: possibly coated (single piece) 08 x Wing screws with countersunk head, new Dimensions: 6.3 x 70 mm Note: - Workbenches are picked unassembled; - Workbench stands are pre-assembled; - The production lead time is usually approx. 3 - 5 working days. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or further transport is required, additional costs will apply, which can be individually requested from us depending on the delivery location and scope.

Condition: new, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dimensions of the workbench: approx. 2,940 x 800 x 985 mm (W x D x H) Dimensions of the shelving unit: approx. 1,730 x 320 x 985 mm (W x D x H) The scope of delivery includes: 03 x Shelving upright S-1, completely galvanized Ledpfxshy Nl Is Al Neac Overall height: 1,972 mm Depth up to a height of 985 mm: 800 mm Depth above a height of 985 mm: 320 mm 02 x Shelving upright S-1, completely galvanized Overall height: 985 mm Depth: 800 mm 10 x Plastic cover caps 10 x Steel feet 33 x Shelf crossbars, S - 2, 1,650 mm clear width 10 x Shelf crossbars, S - 1, 600 mm clear width 28 x Shelf inserts, H 25, 300 x 800 mm 04 x Shelf inserts, H 25, 150 x 800 mm 06 x Shelf inserts, H 12, 600 x 320 mm 03 x Shelf inserts, H 12, 450 x 320 mm 14 x Storage bins, new, approx. 350 x 210 x 150 mm, blue 15 x Storage bins, new, approx. 500 x 315 x 200 mm, blue Note: The waste bin is not included in the offer! Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelving inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails Ljdsthfddepfx Al Njac against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. Lajdpsthi Husfx Al Njc - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Lasdpfx Aeth N Slel Njc Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Ledotk Irkjpfx Al Njac Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench traverses, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Traverse type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Ljdsi Ewqrspfx Al Noac Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 800 mm Surface: possibly coated (possibly in two parts) 16x self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes only. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is typically approximately 5 working days.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Laedpfx Ajtk Iwajl Nsc Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x workbench frame, new Material color: anthracite Overall width: approx. 1,750 mm Overall height: approx. 865 mm Overall depth: approx. 600 mm 1x worktop, new Overall width: approx. 1,750 mm Material thickness: approx. 35 mm Overall depth: approx. 600 mm Notes: - The workbenches are delivered unassembled. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions. Lsdpfx Aoh Euk Usl Noac Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm Lajdpfswgicbex Al Nec 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Lsdportqm Dsfx Al Neac Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), The scope of delivery includes: 02x workbench frames, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Frame height: 900 mm Frame depth: 1,000 mm Includes cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 04x workbench crossbars, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbar type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 01x chipboard, grade II, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Laedpfx Alsi Ewqyj Njc Chipboard depth: 1,000 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are intended to illustrate the material. The material color may vary. The chipboards may be coated or uncoated. - The workbenches are supplied disassembled; - The workbench frames are pre-assembled; - The production time is usually approximately 5 working days.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) Lasdpfx Aetk Iwpol Nec 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: adjustable from 750 - 1,250 mm Scope of delivery includes: Lodpfx Asv Tm Icol Nsac 01x Workbench frame, new Frame color: grey Bench leg adjustment: 700-1,250 mm adjustable 01x Drawer cabinet, new Cabinet color: grey Door color: blue Lockable: yes Number of drawers: 3 pcs Drawer height: 115 mm 01x Worktop, new Material: multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pick-up. Any additional transport or shipping of this item is subject to extra charges, which can be quoted separately by us depending on the delivery location and delivery scope.

Condition: new, Year of construction: 2026, table width: 400 mm, Equipment: rotational speed infinitely variable, – Horizontal load capacity: 200 kg – Vertical load capacity: 100 kg – Table diameter: 400 mm – Through-hole: 140 mm – Tilting – Continuously adjustable speed – Foot pedal – Chuck – Emergency stop – Documentation Ledpfozdcnqox Al Nsac – 230V

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data Line type: Returnable glass bottling line Application: Beverage filling in returnable glass bottles Formats: 0.33 L and 0.75 L glass bottles Packaging: Bottles in crates Filler capacity: 18,000 bottles/hour Premix capacity: 22,000 L/hour Closure type: Plastic screw caps Labelling: Wet glue labelling, 2 aggregates Main machine years: 1996 – 2016 Dismantling planned: February 2027 Scope of Delivery Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 Crate Decapper | RINK | KM 690/4K | 2012 Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 Empty Bottle Inspector | Krones | Linatronic | 2014 Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Labelling Machine | Krones | Universella | 2012 Closure Inspection | Syscona | Expert FHK | 2016 Inspection System | Krones | Checkmat 731 | 2012 Crate Packer | Kettner | 1996 Crate Inspection | Krones | Checkmat 708 | 2011 Palletizer | Matec | Rotomat 3B | 2002 Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000 Lasdpfx Asza Tx Sol Njc

Condition: new, number 80 Positionen weight 150 kg condition neu 28 mm dimensions 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Material: Burnished high-quality steel Scope of delivery: see images Lasdpfx Aljyv I Eyo Nsc Table not included!!

Condition: excellent (used), Year of construction: 2010, Panel saw Lodpfszdqwljx Al Noac Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Operating hours: approx. 761 h Sliding table length: 3,000 mm Cutting width: 1,000 mm Cutting height: 197 mm Max. saw blade diameter: 550 mm Speed: 2,000 - 6,000 rpm Speed adjustment: Vario - stepless Cutting width display: DigitX Scoring saw: No Motor brake: Yes

Condition: excellent (used), Year of construction: 1998, Circular panel saw Manufacturer: Altendorf Type: C45 Year of manufacture: 1998 Sliding table length: 3,000 mm Cutting width: 1,050 mm Laedpfxezdqbkj Al Njc Cutting height: 80 mm Saw blade diameter: 315 mm Power: 4 kW Speed: 4,200 rpm Scoring saw: No Motor brake: Yes Height adjustment: Mechanical Angle adjustment: Mechanical Includes Duplex system

Condition: used, functionality: fully functional, Scale/Table Scale with Ball Transfer Units Manufacturer: GSE Condition: Good, used Overall length: 800 mm Overall width including frame: 870 mm Conveying width: 660 mm Overall height: 230 mm Aluminum frame: Height: 80 mm Width: 40 mm Ball transfer tables are suitable for load carriers and packaging materials with smooth and solid undersides. Lsdpeyg Nxujfx Al Njac Internal article number: 2026020101 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination even under heavy loads. Customized solutions for your intralogistics: For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or to advise you on conceptualization or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, crafts, and the electronics industry. Together, we will work out solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or supplementary components such as order-picking racks or containers.

Condition: used, Year of construction: 2014, functionality: fully functional, total length: 1,300 mm, total width: 1,200 mm, Equipment: type plate available, Pallet Lift Table / Pallet Transfer Unit Manufacturer: Overbeck Year of manufacture: 2014 Condition: Good (Used) Drive type: Chain drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roller width: approx. 945 mm / Usable width: approx. 880 mm Roller diameter: approx. 80 mm Number of rollers: 7 Roller pitch: approx. 200 mm Stock: 2 units Price per unit Internal item number: 2026030301 The conveyor system was in operation until disassembly. Condition: Fully functional, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Thanks to the excellent workmanship, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for inbound and outbound goods. We are happy to provide you with a customized offer or advise you on project planning or assembly questions. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our excellent network of industry specialists. We have successfully completed projects for companies in sectors such as logistics, pharmaceuticals, skilled trades, and the electronics industry. Lodpfx Aoypi Ubol Njac Together, we will develop strategies to optimize your workflow and material flow cost-effectively and sustainably. We can also offer fully automated sorting solutions or additional components such as picking shelves or containers.

Condition: used, Year of construction: 2023, functionality: fully functional, roll width: 465 mm, total width: 540 mm, total length: 3,250 mm, conveying length: 3,250 mm, power: 0.37 kW (0.50 HP), axle spacing: 125 mm, frame height: 120 mm, frame width: 35 mm, Powered Roller Conveyor / Work Table / Conveyor Technology Model: Flat Belt Condition: Used Year of manufacture: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3,250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Roller/shaft pitch: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Color: Light grey Includes 2 SEW motors (0.37 kW) Includes side guides Feet must be ordered separately Available stock: 10 units Price per unit Internal item number: 2026021902 Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Ljdpfx Aeylmi Usl Neac Thanks to the excellent craftsmanship of the conveyor technology, your material glides smoothly to its destination—even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods—we are your competent partner! We are happy to provide you with a customized quote or advise you on design and installation questions. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and outstanding network of industry professionals. We have successfully realized projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, and electronics. Together we will find ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automated sorting technology or additional components such as picking shelves or containers.

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Lodpfexnlavsx Al Noac

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Ledpfx Aljx It Aue Njac