Used Gleason for sale (64)

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Nwodpew Dcx Rofx Abdsc Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Nodpfjwrh H Nsx Abdjwc Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Nsdpfxjw Tfb Se Abdswc Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm Nsdpfxoyan N Es Abdewc gear width 152 mm total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 10 min. module 0,5 weight of the machine ca. 9,5 t dimensions of the machine ca. 3800x2600x2550 mm Maximum wheel diameter: 275 mm Module +: 10Module -: 0.5 CNC control Max. spindle speeds: 1200 rpm Max. wheel width: 58 mm Njdpfx Abeyan Nfsdewc

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min Nedpfx Abovi Ninsdswc stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), Year of construction: 1989, piece diametre 1500MM max coupling 914MM poids 15 tonnes Nodpsfl Aaqjfx Abdjwc

Condition: used, Year of construction: 2003, max. wheel diameter 275 mm gear width 58 mm max. module 13 min. module 2 Nsdsx R U E Nepfx Abdswc Control SINUMERIK 840 D number of teeth 5 - 200 ratio of transmission 10:1 cutter diameter max. 228 mm x-axis 25 - 350 mm y-axis +/- 175 mm z-axis 125 - 600 mm b-axis -5 / +90 ° total power requirement 75 kW weight of the machine ca. 11,7 t dimensions of the machine ca. 12,5 x 3,0 x 3,0 m Equipped for dry milling Pressure deburrer Deburring device with driven brush Integrated magnetic chip conveyor Promot Cellmaster Cartridge pulse filter system User interface control works with Gleason Summary

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 90 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 400 mm, spindle bore: 40 mm, TECHNICAL DETAILS Travel Distance X-Axis: 90 mm Travel Distance Y-Axis: 80 mm Travel Distance Z-Axis: 400 mm Maximum Permissible Head Circle Diameter: 140 mm Milling Arbor Diameter: 22 mm Maximum Gear Cutting Length: 160 mm Angles Maximum Swivel Angle of Milling Head +A Direction: 45° Maximum Swivel Angle of Milling Head -A Direction: 118° Workpiece Spindle Outer Diameter: 105 mm Bore: 40 mm Rapid Traverse X-Axis: 7,500 mm/min Y-Axis: 5,000 mm/min Z-Axis: 15,000 mm/min Rotational Speeds Nwodpfx Aboxvrarodsc Tool: 50 to 4,000 rpm Workpiece Spindle max.: 3,000 rpm MACHINE DETAILS Operating Hours: 29,790 h Cycle Time: 6,654 h Electrical Connection Mains Connection: 400 V (AC) Supply Voltage: 400 V (AC) Control Voltage: 24 V (DC) Frequency: 50 Hz Connected Load: 13 kVA Cable Cross-Section: 16 mm² Fuse Rating: 63 A Dimensions & Weight Space Requirement: 5.25 x 4.06 x 2.94 m Machine Weight: 8 t EQUIPMENT Industrial Filter IFS EC1500 Sediment Separator Knoll KF200/640 Integrated Chip Conveyor with Magnetic Separator Machine Automation for Loading and Unloading Workpieces Robot Automation Güdel KTB-31/62, Year Built: 2018 with Station for Part Remover

Condition: excellent (used), Year of construction: 2007, Gleason Pfauter G130H CNC vertical gear hobbing machine Control, Siemens 840D Year of manufacture, 2007 Capacity Maximum workpiece diameter, about 130 millimetres Maximum gear width, about 170 to 180 millimetres Maximum module, up to module 3 or 4 depending on the configuration Minimum module, about module 0 point 5 Hob head Hob spindle power, about 11 point 5 to 14 kilowatt Hob speed range, about 10 to 4000 revolutions per minute Hob head swivel, about plus and minus forty five degrees Maximum hob diameter, about 100 millimetres Maximum hob length, about 240 to 317 millimetres Hob shift travel, about 170 to 220 millimetres Axis travels X axis travel, about 200 millimetres Y axis travel, about 170 millimetres Z axis axial slide travel, about 250 to 350 millimetres Work spindle and table Work spindle speed, about 0 to 1000 revolutions per minute Table diameter, about 160 to 168 millimetres Table bore, about 65 millimetres Maximum clamping length, about 245 millimetres Hydraulic clamping included in most units Process Wet cutting External gear hobbing Two cut cycles and taper or crown hobbing possible ISO thirty hob arbor Nwjdpfx Aexxzqlobdsc Optional automatic loading systems Electrical and general Machine weight 11 tons Overall footprint, roughly three metres by three metres with guarding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 26,583 h, functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, TECHNICAL DETAILS Workpiece diameter (max.): 130 mm Number of axes: X, Z, A, B, C (0–3) Nodpfx Abjwmc Idsdewc Electrical Power consumption: 47 kVA Voltage: 400 V Frequency: 50 Hz

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) Nsdpfx Abevdtx Nodowc POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Y-axis travel: 33 - 193 mm MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Njdpfx Abew T R Absdjwc Workpiece counter: 886,067 pieces

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 28 958, travel distance X-axis: 100 mm, travel distance Y-axis: 160 mm, TECHNICAL DETAILS Maximum permissible pitch circle diameter: 80 mm Maximum gear length: 170 mm Total length: 240 mm Mounting diameter: 32 mm Radial slide travel (X-axis): 100 mm Tangential slide travel (Y-axis): 160 mm Axial movement Z-axis: 300 mm/min Workpiece spindle - bore: 45 mm Nwjdpfx Aow T Rz Debdoc MACHINE DETAILS Approx. machine weight: 7,000 kg Approx. dimensions (LxWxH): 9,130 x 3,895 x 3,450 mm Voltage: 400 V Frequency: 50 Hz Connected load: 45 kVA

Condition: used, Year of construction: 2002, functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Nwedjv I Tmujpfx Abdoc Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: G0504, workpiece diameter (max.): 63 mm, travel distance Z-axis: 105 mm, outer diameter: 275 mm, distance between centers: 350 mm, swivel angle A-axis (min.): -30 °, swivel angle A-axis (max.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Center distance: 350 mm Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Center height (tailstocks): 350 mm Pivoting range of the fine-tuning head (U-axis): +30 / -30 ° Tailstock/fine-tuning head center distance: min. 120 mm / max. 225 mm Input resolution (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Feed slide Movement range (Z-axis travel): 105 mm Input resolution: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and feed rates Tool speed: max. 2,000 rpm Feed rate in Z direction: up to 2 m/min Feed rate in X direction: up to 2 m/min Feed rate in U direction: up to 2 m/min Feed rate in V direction: up to 2 m/min C3 direction: max. 12 °/s Servo drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X-axis: 20.0 Nm at 3,000 rpm Z-axis: 20.0 Nm at 3,000 rpm U-axis: 6.0 Nm at 3,000 rpm Vertical gantry (V1 axis): 6.0 Nm at 3,000 rpm Nwedpewmbmlefx Abdoc Gripper rotation axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Three-phase motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Coolant pump: 4 kW at 2,840 rpm Hydraulic equipment Flow rate: 21 l/min System pressure: 50 bar Headstock clamping pressure: max. 35 bar Tailstock clamping pressure: min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space required: 2,700 x 2,300 x 2,600 mm Operating fluids Hydraulic fluid: HLP D 46 Hydraulic capacity: 100 l Electrical system Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication system - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Precision wheel head with U-axis - Machine with full hydraulic equipment - Dialog-guided operator terminal

Condition: used, TECHNICAL DETAILS - Part diameter : 100 [mm] - Nominal module * gear hobbing : approx. 3.0 [mm] * endless screw milling : approx. 5.0 [mm] - Max. axial movement : 320 [mm] - Cutting head orientation : -45 / + 115 [°] - Main mill max. diameter : 118 [mm] - Max. cut out length of the mail mill : 180 [mm] - Max. mill movement (Shifting) : 160 [mm] - Max. part-holder spindle speed : 3000 [t/mm] - Min./max. distance between axes : 10/100 [mm] Nwodpfxjx Ed A Re Abdec - Cutting head motor power : 14 [kW] - Main mill speed : 50-12000 [t/mm] - Weight : 5000 [kg] EQUIPMENT - CNC Siemens 840D - Cooling tank - Chip conveyor

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece Nwjdpfx Aewzyp Iobdec circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, Year of construction: 2007, control Siemens 840D Nsdjwzypuepfx Abdowc

Condition: used, Year of construction: 2008, control Siemens 840D Nwodpewzypnefx Abdsc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, TECHNICAL DETAILS Njdpfxjwc Tg Nj Abdswc Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Largest inner diameter: 130 mm Tool Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Nwsdpjt Hwnisfx Abdjc Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Nedpfx Ajt Hwxhsbdowc Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 2008, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm spindle speeds (infinitely variable) 6000 U/min work piece spindle speed 1200 U/min diameter of tools max. 230 mm diameter of tools min 69,85 mm Nodpovxwmtsfx Abdewc x-axis 325 mm y-axis 350 mm z-axis 470 mm b-axis + 90,1 / - 1 ° work piece table - Ø 212,71 mm Control SIN 840 D SIEMENS total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m Internal probe Renishaw LP2 (axis X2;Y2) Hoffmann coolant filter system HSF 100SE/K (built in 2008) Tank capacity 2500L VT oil mist filter system

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. Nwsdpewn D Uhefx Abdjc The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.