Used Grain Drain for sale (1,483)

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Bwjdpfx Aisz N Nwyewow Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Bedpfjz Rwimex Aiweww Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, machine/vehicle number: WFDFLT33903000213, empty load weight: 7,287 kg, maximum load weight: 27,713 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,793 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R22,5", color: green, Please note: archive images! Vehicle may currently be in use! #Chassis – haulage semi-trailer - Fine-grain steel welded construction, lightweight design up to the landing legs - Fifth-wheel plate with replaceable 2" kingpin - Preparation for lashing eyes in the floor at the sides - 24 t 2-speed landing gear, one-side operation, with straight lower section - Pull-out ladder at rear - Side-mounted door stays - Wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection with wide Fliegl mudflaps - Quarter-shell mudguards - Rear ram protection (corner protection) - Aluminium ladder 3300 mm, with side-mounted holder Bedpfx Aoz Ti A Dsiweww - Tarpaulin pole with holder - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm #Axles + suspension - SAF disc brake axles with 430 mm disc diameter, air suspension - 1st axle: automatic lift axle incl. forced lowering and traction help, actuation "3x braking" #Braking system - Dual-line air brake system, spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS (electronic braking system) with EBS socket at front - Raise & lower valve - Vehicle stability system #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 Volt, multi-chamber lamps - Yellow LED side lighting - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin non-interchangeable sockets at front #Moving floor – hydraulics - Hydraulic cylinders with sliding mechanism installed in the floor - Dual-circuit hydraulics - Forward/reverse switching and on/off electrically via radio remote control - Drive system make Keith Runningfloor - Moving floor power supply via sidelights - Hydraulic operation via truck PTO - Hydraulic connection with hose at front wall and screw-type plug of high-pressure rotary coupling NB = 48 mm - Note: dual-circuit hydraulic system required! - Recommended pump output: max. 223 ltr/min (180 ltr/min recommended) - Pressure: max. 210 bar - Oil tank capacity: min. 200 ltr #Moving floor – floor - Moving floor with rear wear plate, Running Floor - Aluminium floor slats, 6 mm floor profile, ribbed design - Prepared for retrofitting a floor protection sheet #Moving floor – body - Aluminium box body made of high-quality, abrasion-resistant material - Front and side walls of aluminium hollow profiles, welded all round at the top to a wide special aluminium reinforcement profile, welded into a special frame at the bottom - Moving inner bulkhead (travels with the floor) for better unloading - Reinforced tarpaulin flaps at bottom - Hydraulic rear wall with large upward opening, robust design, with radio remote control, operable only with roof open - Standing platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roll-up roof tarpaulin - Removable, swivelling cross bows for tarpaulin support + tarpaulin support at front on front wall and at rear on rear wall - Hydraulic roof with tarpaulin, operable via radio remote control #Registration / plates - Germany - With Dekra inspection and expert report Please note: archive images!

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics Bedpfxoz Tzqyo Aiwjww - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013056, empty load weight: 3,290 kg, maximum load weight: 9,800 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 05/2023, next inspection (TÜV): 03/2027, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 1,060 mm, total length: 9,690 mm, total width: 2,550 mm, total height: 3,580 mm, suspension: air, tire size: 235/75 R17,5", color: yellow, Please note: the images are archive photos. The vehicle may be in use! #Chassis centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly inclined, new design with "Load-Lock-Profil" for lashing straps - 1 pair of geared landing legs at front, straight lower section, one-side operation on the right in direction of travel - Side door stays, steel underrun protection - Anti-spray mud flaps on last axle only, rear impact protection - Spare wheel carrier (1 wheel) with fastening kit - Platform height 1060 mm #Towing equipment - Drawbar with approved 40 mm drawbar eye, haulage version - Drawbar height mechanically adjustable via threaded spindle, below floor level, max. range 200 mm - Drawbar length mechanically adjustable approx. 1950 - 2300 mm, lockable approx. every 50 mm, set to approx. 2100 mm #Axles + suspension - BPW axles at manufacturer's choice, tapered roller bearings, S-cam brakes - Axles/running gear laser-aligned: reduces tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system, colour-coded lines for easy servicing, spring-brake parking brake - Duomatic connection at front, with connecting line to the truck - EBS, electronic braking system with EBS connector at front - Please note: only to be towed by vehicles ensuring ABS effectiveness! - Raise/lower valve, vehicle stability system #Wheels and tyres - 235/75 R17.5, make at manufacturer's choice, steel rims, factory silver #Electrics - 24 V, multi-chamber lamps - Yellow LED side lighting, also coupled with indicators (flashing side marker lights) - 2 white front position lights, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front - 2 additional LED work lights at rear, switched via reversing light #Floor - Film-faced plywood approx. 30 mm, for high point loads - Premium floor sealing, floor jointed all round - Platform length approx. 7,300 mm #Front wall / front corner posts - Through-loading via double-leaf front portal doors, each with 2 internal cam bar locks - Steel corner posts, release device for side tarpaulin - Bridge plate approx. 2,400 mm wide, divided once, approx. 350 mm long for resting on tail lift, capacity approx. 1,800 kg, incl. tail lift support - (Drawbar length then approx. 2300 mm; with 2000 mm tail lift, coupling set-back on truck min. 20 - max. 240 mm) #Side boards - 25 mm aluminium hollow profile, 400 mm high, drop-down and removable #Centre stanchions - 1 pair of sliding stanchions, movable along entire length #Insert slats - Wooden insert slats #Rear wall / rear corner posts - Steel corner posts up to lower edge of roof - Tarpaulin attachment with round tube and tensioning ratchet - Double-leaf rear portal doors, each with 2 internal cam bar locks #Tarpaulin Bodpfx Aj Afwuzeiweww - Tarpaulin with welded-in horizontal and vertical straps, stainless steel tensioning buckles - Customer lettering Dachser on side tarpaulins and rear portal #Roof - Fixed roof with tarpaulin and roof bows, tarpaulin colour: white - Optimised rain gutter at rear on end bow, above doors #Country of registration / plates - Germany, Dekra inspection and expert report (§13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL

Condition: new, empty load weight: 6,233 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2026, Equipment: ABS, Unladen weight: 6233 kg, permissible total weight: 36000 kg, cargo space (L W H): 9.807 mm x 2.440 mm x 2.200 mm, tire size: 385/65 R22.5, cargo space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle at the front, electronic braking system EBS, toolbox, weight-reduced chassis, combination door, grain conveyor, tarpaulin roof, platform, hydraulic cylinder (low pressure), connection plug 1x15 and 2x7-pole, anti-splash, you can find our complete vehicle range at [website address]. Do you require financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Bodpfsz Ntvyjx Aiwoww

Condition: new, empty load weight: 6,233 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2026, Equipment: ABS, Unladen weight: 6233 kg, permissible total weight: 36000 kg, cargo space (L W H): 9.807 mm x 2.440 mm x 2.200 mm, tire size: 385/65 R22.5, cargo space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle in the front, electronic braking system EBS, toolbox, weight-reduced chassis, combination door, grain conveyor, tarpaulin roof, platform, connection plug 1x15 and 2x7-pole, anti-splash guard, tire pressure monitoring. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We would be happy to advise you. Bwedpfx Aiez Eccgswew

Condition: new, empty load weight: 6,233 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2026, Equipment: ABS, Unladen weight: 6233 kg, permissible total weight: 36000 kg, cargo space (L W H): 9,807 mm x 2,440 mm x 2,200 mm, tire size: 385/65 R22.5, cargo space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle at the front, electronic braking system EBS, tool box, weight-reduced chassis, combination door, grain slide, tarpaulin cover, platform, connection plug 1x15 and 2x7 pole, anti-splash guard, tire pressure monitoring. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Bedpfx Ajz Eccmeiwoww

Condition: used, maximum load weight: 29,158 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2012, next inspection (TÜV): 05/2027, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Year of construction: 2012, Equipment: ABS, Well-maintained Schmitz Cargobull SCB S3T beverage semi-trailer. Equipment: Fine-grain steel frame, galvanized Schmitz Cargobull axles 1 liftable axle Aluminum rims Tire condition: 1st axle approx. 60%, 2nd axle approx. 70%, 3rd axle approx. 60% Air suspension with lifting and lowering valve Sliding tarpaulins, left and right Reinforced tarpaulins for beverage transport Beverage certificate Sliding tarpaulin as roof tarpaulin Recessed rails in the floor and roof for locking the load securing bars. Bwodpfx Asz Efd Hjiwew Rear doors Spare wheel holder without spare wheel Side underrun protection For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. Bwjdpsz Rmvcofx Aiwew TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, working width: 550 mm, area performance: 2,475 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 40 l, TASKI SWINGO 955B Scrubber-Dryer New SIAP 12V 85Ah gel batteries (2x) New NEOS 24V 10A charger Year of manufacture: 2021 550mm cleaning head equipped with new medium-stiffness disc brushes, suitable for use on any surface. New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Wheel drive facilitates daily operation. Suction motor ensures high water recovery power from the squeegee tool. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 550 Squeegee working width (mm): 800 Theoretical coverage (m²/h): 2475 Working speed (km/h): 4.5 Tank capacity (l): 40/40 Weight ready for operation (kg): ~179 Dimensions (L x W x H) (mm): 1180 x 800 x 1150 INCLUDED: NEW SIAP 12V 85Ah gel batteries (2x) NEW NEOS 24V 10A charger NEW 280mm disc brushes (2x) 24V 500W suction motor Suction hose + drain hose Squeegee assembly with new oil-resistant blades Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills. The machine's design makes it highly maneuverable. A tight turning radius enables operation in narrow passageways and aisles. The parabolic squeegee ensures thorough extraction of the solution from the cleaned surface. The wide working width (550mm) ensures high area coverage. Bedpfoz Rpa Djx Aiwjww Clear and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 572 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Scrubmaster B70 TB650 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2019 model year; 572 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface. New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water extraction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 Bwsdjz R S Edopfx Aiwow INCLUDED: NEW 12V 105Ah SIAP gel batteries (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 500W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable. A tight turning radius allows for operation even in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (650 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System Bwedpjz R Tr Sjfx Aiwsw 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) Bwedpfx Aioz Hdflewsw • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Bedpfx Aisz Hxd Aswoww With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, functionality: fully functional, Manufacturer: Ultrasonic Cleaner Model: JP-360ST Equipment type: Ultrasonic cleaner Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Ultrasonic generator supply voltage: 180–265 V Power supply: AC 380 V, 3-phase Tank capacity: 135 L Working tank dimensions: 50 × 60 × 45 cm Overall dimensions: 70 × 80 × 80 cm Drain valve: Ball valve, 1" Timer control: Automatic timer shut-off Functions Bjdpfx Aijz H Rlrswsww Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Adjustable operating time Automatic shut-off at the end of the cycle 1" ball drain valve

Condition: new, mileage: 110 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 15 m³, loading space length: 3,900 mm, loading space width: 2,080 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Welcome to carmax24! Today, you have the opportunity to purchase one of our selected, inspected vehicles. Expertly inspected and high-quality vehicles ensure high customer satisfaction, and have done so since 2008. This is our daily approach because you, the customer, are our top priority at carmax24. Equipment list Vehicle IVECO Daily 35S18HA8 * Code AT ? Q-LEAF front axle suspension * Code CA ? Axle configuration 4x2 * Code DR ? Right-hand drive for right-hand traffic * Code EP ? Engine F1C 176 EVI, 176 hp * Code GT ? 8-speed Hi-Matic automatic transmission * Code MT ? Permissible total weight 3.5 t * Code PT ? Mechanical rear axle suspension * Code RW ? Single tires on the rear axle * Code VE ? Chassis with cab Bedpfszz U Atex Aiweww * Code WB ? Wheelbase 4100 mm Special equipment * Code 72625 ? Full-LED headlights * Code 73024 ? Exterior mirrors for body width up to 2350 mm * Code 00677 ? Rear parking aid * Code 14569 ? FMS interface for telematics * Code 06064 ? Reinforced rear axle suspension (double parabolic spring) * Code 01908 ? AGM battery 105 Ah * Code 79570 ? Alternator with constant charging current * Code 02359 ? Axle ratio 3.59 * Code 14522 ? Adaptive cruise control (ACC) * Code 05925 ? Additional speed limiter * Code 08628 ? Storage compartment above the windshield * Code 00259 ? Air-suspended comfort driver's seat with armrest and lumbar support Comfort package * Code 01619 ? USB port A+C * Code 01606 ? Infotainment system with 7-inch display * Code 06555 ? Fog lights * Code 76104 ? Manual air conditioning * Code 07196 ? Air conditioning compressor 170 cm³ Other equipment * Code 50105 ? Vehicle color White IC 194 * Code 33999 ? No special use * Code 30164 ? Logistic Mode deactivated * Code 30001 ? Batteries charged * Code 20532 ? Tires 225/65 R16 ECO * Code 79443 ? Operating manual EMEA/APAC Refrigerated box body * Refrigerated box in sandwich construction * GRP outer skin * Reinforced GRP inner skin * Galvanized steel subframe * Front wall insulation 80 mm * Side wall insulation 60 mm * Roof insulation 100 mm * Floor insulation 120 mm * Rear door insulation 80 mm * Two-leaf rear doors, 270° opening angle * Single-leaf side door, 180° opening angle * Side door width 900 mm * Stainless steel fittings and locks * Ladder on rear and side door * Preparation for refrigeration unit * Non-slip insulated floor * Recessed cargo securing rail * Floor angle profile 300 mm * Drain plug with valve * Two recessed LED interior lights * Welded rear frame made of stainless steel * Rear rubber buffer * Plastic fenders with mud flaps * Lateral bicycle protection fairings * LED exterior lighting Internal dimensions of the body * Length 3900 mm * Width 2080 mm * Height 1900 mm Refrigeration unit * Thermo King V 400X MAX 20 12V * Diesel engine operation and 230 V standby operation * Cooling capacity at 0 °C: 4090 W * Cooling capacity at -20 °C: 2240 W * Air flow 1990 m³/h * Weight 102 kg * Direct Smart Reefer temperature control * TouchLog temperature data logger * 230 V electric standby operation * Alarm and diagnostic system * Temperature monitoring * Operating hour counter Attention! Sample photos Our special service for you: * Maintained according to the service schedule at contract partners and certified workshops * Winter tires available at an extra cost * Warranty insurance possible up to a maximum of 36 months for an additional fee * We will gladly and fairly accept your used vehicle as part of the deal! * Financing

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Bwsdpfxjzxnats Aiwjw Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: used, Year of construction: 2016, Overview This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor Bodpfx Aijz Hzgyswjww - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: used, maximum load weight: 33,036 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 8,500 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, loading space volume: 40 m³, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2025, Equipment: ABS, Equipment: Lift axle, spreader, air suspension with lifting/lowering device, support legs, tire tread depth: 100% Safety & Environment: ABS, disc brake, EBS ----* Schmitz SKI 24SL 8.2 * Aluminum box body, 40 m3, with grain discharge slide * Tare weight: 5760 kg * Load pressure gauge * Schmitz Rotos axles * Axles 1 and 3 are liftable * Electric air suspension system * 2 x 7-pin sockets and 1 x 15-pin socket * Low-pressure cylinder, max. 170 bar * Inner wall thickness 3.5 mm, floor 8 mm * Roof-shaped cover frame, spreader, lashing chains, PVC roll-up cover * A-sign * Tires: 385/65 R22.5 ----* Our opening hours * Monday - Friday: 08:00 - 17:00, Saturday: by appointment! * Outside of opening hours, we are available by appointment! Bwedszy Tc Aspfx Aiwew * We speak: English, [other languages] * Other: Errors, prior sale and changes subject to confirmation * Leasing, financing, trade-in possible * All information without guarantee!

Condition: repair required (used), functionality: limited functionality, mileage: 740,754 km, power: 220 kW (299.12 HP), first registration: 02/2017, fuel type: diesel, empty load weight: 11,330 kg, maximum load weight: 14,670 kg, overall weight: 26,000 kg, tire size: 315/70 R 22,5, axle configuration: 6x2, wheelbase: 5,500 mm, fuel: diesel, fuel tank capacity: 290 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 50 m³, loading space length: 9,000 mm, loading space width: 2,465 mm, loading space height: 2,250 mm, cooling unit manufacturer: Mitsubishi, cooling unit model: TDJS 70 DZA, Equipment: ABS, EBS, air conditioning, cruise control, lane keeping assist, power assisted steering, seat heater, tire pressure monitoring, traction control, truck registration, Vehicle number #31155 Euro VI FH-S ClassicSpace Wheelbase 5,500 mm Kerscher refrigerated box body, internal dimensions: 9,000 x 2,465 x 2,250 mm Rear loading height 2,140 mm LBW Dhollandia 2,000 kg tail lift with roll-off protection 290-liter tank Engine brake, 3-stage Full air suspension Tires 315/70 R 22.5 Differential lock Powershift3 Air conditioning Mitsubishi TDJS 70 DZA refrigeration unit Lift axle Tag axle A3 Cruise control Traction control Aluminum grain floor 1 row of load securing rails Interior lighting in the box body Driver's air suspension seat/heated Bwsdpfx Aio Aaz Iqowsw Reversing camera Radio/CD/Bluetooth Lane keeping assist Attention assist Active Brake Assist Hill start assist Multi-function steering wheel On-board computer Roof hatch Free swing mode Diesel particulate filter Central locking with remote control Fog lights LED daytime running lights Work lights Sun visor Front mirror/heated Air horns Tire pressure monitoring Electric windows, 2-pane Electric exterior mirrors

Condition: new, maximum load weight: 39,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list Complete equipment list available upon request. Equipment: * Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick. Loading platform: * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings, located horizontally at the front of the loading platform, for (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond-plate flooring over the axles. Kingpin: * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Bjdpez Rr R Ssfx Aiweww Axles: * BPW axles and suspension, 2 axles rigid, 1 axle with trailing arm steering * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually Air suspension: * with lifting and lowering valve Tires: * 235/75 R 17.5 3PMSF – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Steel construction: * made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: * according to EU regulations * Lighting: 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel construction automatically blasted with a shot blasting machine after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint build tested in a salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front bulkhead, approximately 400 mm high * A spare wheel holder in front of the bulkhead * Mounting rail for aluminum loading ramps on the gooseneck with integrated impact protection (± 56 kg) * Galvanized folding supports under the bevel of the loading platform * A mounting bracket for a rotating beacon on the rear of the trailer * On the gooseneck and rear panel, on the left and right, a mounting bracket for warning signs including socket * Load indicator to determine the axle loads including load diagram * 1 pair of recessed lashing rings along the center beam at the rear in the bevel (LC 10,000 daN) * Additional fastening option for the license plate of the trailer at the rear right of the trailer Incl. special accessories: * Aluminum sideboards and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvan

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Type Eco "H" with additional reinforcing band -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Bwodpfezu Dd Hox Aiwew Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 74 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2021 with 74 hours of use 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 600W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Bjdpfxszwk Nno Aiwoww The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Bsdpfx Aijz Ndazswsww Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)