Used Grinding Wheel Flange for sale (23,001)

Year of construction: 2021, condition: refurbished (used), used grinding flange f. JUNG HF50 / JF520 / JF625 Iedpfx Ashcn I Eeaxstk - cleaned and checked -

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Ijdpfxot Hw N Hj Aaxjtk Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel Iedpfx Aajqva I Rjxjtk -Grinding wheel: grinding wheel -Outside: Ø 495 mm -Width: 30mm -Receptacle: Ø 203 mm -Total weight: 9.2 kg

Condition: new, external diameter 762 mm internal diameter 304,8 mm width 36 - 42 - 64 mm Unused grinding wheels Ø 762x304,8 mm! 2x36 mm width Norton 1x42 mm width Krebs 4x64 mm width Krebs Ijdpjvut Avefx Aaxotk

Condition: used, Year of construction: 1975, functionality: fully functional, total height: 2,000 mm, total width: 1,200 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 3,800 kg, workpiece diameter (max.): 60 mm, input voltage: 400 V, LIDKÖPING 2C – Centerless cylindrical grinding machine (for through-feed and plunge-cut grinding), manufactured in 1975. Manufactured in 1975 · For through-feed and plunge-cut grinding · 14 grinding wheels and 4 regulating wheels, 28 support rails. Centerless cylindrical grinding machine from Lidköpings Mekaniska Verkstads AB (Sweden) for through-feed and plunge-cut grinding. Classic mechanical-hydraulic design without CNC: cast iron bed, grinding wheel and regulating wheel with a support rail in between, belt drive with two speed stages that can be switched using variable pulleys. The machine was in operation until recently at a Swabian precision manufacturing company and was used there approximately once a month; it was sold solely due to lack of space. An unusually complete set of accessories is included: 14 grinding wheels and 4 regulating wheels, 4 mounting flanges, and 28 support rails – making the machine ready for use without any further procurement. For the 2C series, service, spare parts, and overhauls are still available today in Germany and from the brand owner in Sweden. EQUIPMENT - Regulating wheel spindle with support rail - Feed trough for through-feed operation - Separate hydraulic unit (ASEA motor) - Separate control cabinet with relay control and compressed air maintenance unit - Variable pulley drive, 2 speed stages - 14 grinding wheels, 4 mounting flanges, 4 regulating wheels - 28 support rails in a wooden crate TYPICAL APPLICATIONS - Pins, bolts, dowel pins, and drift pins – through-feed grinding to final diameter - Shafts, axles, and round bars in series, also as preparation for centerless grinding - Rollers, sleeves, and bushings – external cylindrical grinding in one pass Iodpfxszvh Ulj Aaxstk - Tubes and bar stock to size and roundness - Parts with a flange or shoulder – in plunge-cut operation - Rework and repair of precision parts in tool and contract manufacturing operations

Condition: good (used), Year of construction: 1981, Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm Isdpfx Aasb A Nkvexetk -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: groove width 12 mm -Dimensions: see drawing in the photos -Dimensions: 150/130/80 mm -Weight: 2.0 kg Isdpfxjv Sqy Tj Aaxstk

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Maximum gear diameter: 330 mm Maximum module: 6 Wheel width: 180 mm Minimum module: 0.5 Machine weight: 5500 kg Iedpfxozh H R No Aaxstk Available accessories can be seen in the photo.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm Iedeb A Nlkepfx Aaxjtk -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Year of construction: 1976, condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, year of last overhaul: 2026, The machine underwent a comprehensive retrofit in 2026! New centering point with carbide insert on the workpiece spindle stock Tailstock with MK-3 mount and air lift Adjuster on the tailstock New centering point with carbide insert on the tailstock 2 grinding wheel flanges 1 new grinding wheel 1 internal grinding spindle Isdpfxozr Ep Ee Aaxstk Completely renewed paper band filter with new filter fleece and circuit Completely overhauled, steplessly adjustable grinding spindle motor Automatic grinding cycle with dwell time and shut-off Machine geometrically completely overhauled Guides ground and scraped Hydraulic cylinder overhauled New piston rod and seals Machine body and assemblies blasted, primed and completely painted TECHNICAL DETAILS Center height: 125 mm Center distance: 600 mm Grinding wheel flange dimensions: 400 × 50 × 127 mm Speed of internal grinding spindle: 14,000 rpm EQUIPMENT Workpiece spindle stock standard with MK-5 mount, swiveling Stepless speed control via potentiometer

Condition: used, Year of construction: 1996, Technical details: Iodpfx Aaoizldxexjtk weight of the machine ca.: 15 t

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: Grinding wheel puller Isdpowuyc Uefx Aaxjtk -Dimensions: see photos -Dimensions: 195/105/H90 mm -Weight: 2.9 kg

Condition: used, Grinding wheels, grinding bodies -Outer diameter: 555mm -Width: 110mm Itodpfx Asd Sqyfjaxek -Inner diameter: 203mm -T1707801 -Weight: 50.5kg

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines Itodpedp Npfofx Aaxsk -Edition: mm -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm Itodpsb A Naujfx Aaxek -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

Condition: ready for operation (used), Year of construction: 1989, • Gear grinding machine NILES ZSTZ 08 CNC • CNC: Fanuc 180i-M • Minimum/maximum module: 2/14 • Maximum grinding diameter: 800 mm • Maximum grinding diameter without tailstock: 1000 mm • Minimum grinding diameter: 50 mm • Grinding wheel speed: 2450 rpm • Maximum helix angle: 45° • Rotary table diameter: 630 mm Iedpjzk Hfrsfx Aaxjtk A set of change gears is available.

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Interior diameter: 51 mm Isdpfx Aasd Sqyloxstk -Weight: 32 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels Iodpsd Sqymefx Aaxetk -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

Condition: used, Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm Iodpfx Ajcx U Uvjaxotk -Width: 30 mm -Number: 9x discs available -Price: per piece -Weight: 1.8 kg

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 MAX GRINDING DEPTH ,ONE CYCLE, 0.99 Itedpfx Ajyyln Teaxok SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg Iedpfx Aod Srxmsaxotk

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Inside diameter: 127 mm Itsdjd Sqykjpfx Aaxjk -ENR.625 EK-30/3-M-KE -Price: per piece -Number: 3 pieces -Weight: 27 kg

Condition: used, Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm Itsdpfx Aaecnkwqoxjk -Price: per piece -Number: 1x available -Weight: 3.6 kg

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos Ijdpfxjrxw E Ns Aaxotk -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS Ijdey Hi Epopfx Aaxstk VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK PAPER FILTRATION SYSTEM REBUILT BY ANDMAR EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK