Used Double Wheel Grinding Machine for sale (84,615)

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Gkodpsy R Drljfx Al Sec

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW Gjdpfx Aexq Hkuel Sokc weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Gsdpfsiiyq Hex Al Sskc Also other models available from stock! Inquire about the current stock.

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m One machine is suitable for rough grinding, and the other for finish grinding. The machines were used for the production of connecting rods. Gjdjxq R Hajpfx Al Sokc In our assessment, the machine is in good used condition. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Gjdjz Rqk Ropfx Al Sskc Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Gjdpfx Alexcx A Ts Sekc

Condition: used, Year of construction: 1990, Technical details: Gkedevnmnrepfx Al Sec adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Condition: as new Category ID: 1166 Type ID: 307 Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us. Godpfxoyh Rklj Al Sekc

Condition: good (used), Aceti Macchine double grinding wheel Type: FB 90 2/4 ART 101 Diameter grinding stone max: 210 mm Gkodpel I I Upjfx Al Sjc Machine height: 130 cm Weight: ca 125 KG

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. Gkodpfxjxghngs Al Soc The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units - Weight: 4300 kg - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm Godpfx Aszqgmcel Sokc - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min - Milling speed: 4000 rpm

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition Gsdexpqy Rjpfx Al Sskc

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Godeiiyr Sepfx Al Sekc Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Condition: excellent (used), Year of construction: 2003, Degen FS 2550 Surface Grinding Machine Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. CE compliant!! The machine comes from the Richard-Hartmann School (vocational school) in Chemnitz. Technical data: Year of manufacture: 2003 Clamping area / table size: 500 x 250 mm Max. grinding area: 500 x 250 mm Max. travel (X / Z): 600 x 280 mm Max. distance between spindle nose and table: 490 – 500 mm Gjdpsz Rla Hofx Al Sekc Max. workpiece weight: 320 kg Dimensions of magnetic clamping plate: 500 x 250 x 80 mm Grinding spindle & feed Grinding wheel dimensions: 355 x 25 x 127 mm (standard) Spindle speed: 1,500 rpm (at 50 Hz) / 1,800 rpm Spindle motor: 2.2 kW (3 HP) Longitudinal feed (X-axis, hydraulic): continuously variable 1 – 25 m/min Transverse feed (Z-axis, automated): 0.1 – 10 mm/ About the machine: Offered is a Degen FS 2550 surface grinding machine, manufactured in 2003, in SUPER condition with approximately 100 operating hours. This universal surface grinding machine is in very good original condition. It comes from a vocational school where it was used only sparingly for training purposes. It has a very easy-to-use control system. A grinding travel of 500 mm in the longitudinal axis and a transverse travel of 250 mm make it suitable for toolmaking, fixture construction, and small-series production. Its extensive standard equipment and ease of operation are characteristic of this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Degen has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Degen on-site while it is powered up. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm Gsdpfx Aexuv Udol Sekc In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Gkedpfx Aerk U Edjl Ssc Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Gjdpfx Alezxnats Sokc Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 10229, functionality: fully functional, operating hours: 25,000 h, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 200 mm, grinding belt length: 1,800 mm, grinding height: 190 mm, height adjustment type: electric, actuation type: electric, total height: 1,890 mm, total length: 2,070 mm, total width: 1,020 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, The machine is in very good condition, has been used only a little, with the option of refurbishment upon agreement. Gkjdpfx Alsyt Hkus Sjc

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, Gjdpfx Aszzpaajl Sjkc COMPLETELY OVERHAULED in 2024.

Year of construction: 2018, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Godjiiyuqopfx Al Sekc Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Gjdjhaf Ndepfx Al Sekc Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz Gedpfx Aloxrgtxs Sjkc - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Condition: used, Year of construction: 1996, Technical details: Gkjdpfeizldxex Al Sec weight of the machine ca.: 15 t

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Grinding wheel dressing machine for dressing grinding wheels up to a diameter of 450 mm Easy to operate, robust, and precise Our grinding wheel dressing machine offers an unbeatable combination of ease of use and exceptional stability. The solid granite base ensures maximum precision and durability, while the user-friendly operation maximizes efficiency in your production. Godpsy Anykefx Al Sjkc While you continue production on your tool grinding machine, our dressing machine saves you time – and therefore reduces costs.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed Gksdoyv Iqvjpfx Al Sjc to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian