Used Guillotine Shears for sale (1,777)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Kdedpszg Dp Tjfx Acpou Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: like new (used), functionality: fully functional, back gauge: 750 mm, overall weight: 3,500 kg, total length: 2,800 mm, total width: 1,900 mm, total height: 1,660 mm, number of support arms: 3, year of last overhaul: 2019, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO TS 2006 in very good condition Working length: 2050 mm Capacity in regular steel: 6 mm (400 N/mm²) Length of back gauge: 750 mm Ksdszxgupepfx Acpsdu Control: SP-9 motorized back gauge with digital display Blade gap: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of clamps: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side gauge 1500 mm including ball bearings Equipped with a sheet support device: No Working height: 770 mm Motor power: 7.5 kW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting Ksdpfsumpq Nsx Acpsdu - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: excellent (used), Electric Schröder panel shear – in top condition – ready for immediate use – retains its value. For sale is a Schröder panel shear with a manual back gauge, in good technical and visual condition. 2000mm x 4mm. Includes loading. Sale: • Machine price, net • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If you are interested, please contact us by phone. Phone: Kedpfxszq Rwlj Acpedu

Condition: good (used), Panel shear – Kurt Eugen Fischer Type/Model: SK8/3000 Ksdpjz Nwacjfx Acpodu Condition: Used Year of manufacture: 2007 Technical data: Cutting length: 3,000 mm Nominal sheet thickness: approx. 8 mm Tensile strength of the material: 450 N/mm² Requested item: Shipping costs will be provided in a customized quote.

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Kdjdpfszz Ru Ejx Acpsu Capacity 1100 x 4 mm

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Kodpfjzvhktex Acpjdu Can be inspected by prior arrangement.

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Kedpfx Acezgf Uqjpodu

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. Kodpfx Acjy Rtb Aopsdu You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT

Condition: good (used), Year of construction: 1993, functionality: fully functional, total width: 2,550 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 7,500 kg, Manufacturer: LVD Model: HST 40/6 Location: Strojrem, Križevci Year of production: 1993 Bending length: 4050 mm Max bending thickness at 45 kg/mm²: ~6 mm Ksdovtl Nropfx Acpodu Working stroke: 1000 mm Machine dimensions: 4900x2550x1800 mm Machine weight: 7500 kg Machine rated power: 12 kW

Condition: excellent (used), functionality: fully functional, Capacity 1000 x 3.5 mm - 55 strokes/min - electric foot switch - left side stop 600 mm, two supports of 600 mm each - central lubrication - Ortlinghaus brake-clutch combination - switchable between high-hold position and tilting roller table Kdedpfx Ajz Ict Recpju - rear safety by light curtain

Condition: as good as new (ex-display), functionality: fully functional, Hydraulic plate shear / WEIKA Model 3200x10mm / NEW - Unused -CE marking -Control display -Cutting length 3200mm -Max. cutting thickness / STEEL 10mm Ksdoz Ikrnjpfx Acpsdu -Max. cutting thickness / STAINLESS STEEL 8mm -Max. cutting thickness / ALUMINUM 12mm -Digital back gauge -Manual shear gap adjustment -Foot switch -Rear light barrier / Left - Right -Front support with ball rollers -Drive power 11KW Dimensions: L x W x H 4 x 2 x 1.9 meters / Weight 8000KG Errors and omissions excepted.

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° Kdjdozw Dt Hjpfx Acpsu - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Kdedeziviwspfx Acpeu

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Kjdpfx Aezkgf Eecpsdu

Condition: good (used), functionality: fully functional, Year of construction: 2005, Mechanical oscillating shear Manufacturer: Schröder, Type: MSS 1250 x 5.0 Year of manufacture: 2005 Technical data Manufacturer: Schröder Type: MSS 1250 x 5.0 mm Year of manufacture: 2005 Useful length: 1250 mm Sheet thickness: 5.0 mm Stroke rate: 32/min (only in continuous stroke) Rated power: 17.0 kVA Cutting angle: 1.7° Dimensions: L 2.00 x W 2.0 (plus angle stop) x H 1.50 m Kdedpfx Aez Ny I Nscpsu Weight: approx. 2.7 t Equipment - Continuous, pneumatic clamping beam with hard rubber strip - Manual rear stop 750 mm - Angle stop - Support arms - Manual adjustment of the cutting gap - Cutting edge lighting - Foot switch All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Kdedpfx Acoy Nycqopeu Adjustable cutting angle

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed Ksdpfxsz Dqyws Acpodu The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: good (used), functionality: fully functional, Year of construction: 1978, Used conventional press brake by Darley Type AP 150 3100 Capacity: 3100 x 150 tons Simple operation The front beam partially sinks into the ground Includes tooling Kdodpfx Aozk Hl Eocpeu

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m Holder for round bar (properly attached to the machine; if desired, we also have round bars in various lengths available as an option) Extendable front support Invoice with VAT shown Bending machine KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Attachment rail Round rollers and other rails According to §25a UStG The machines are in good used condition and are ready for immediate use. They come from a private owner and a small business (50/50). Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, back gauges – everything related to sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, round machining machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back stop, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. Please feel free to contact us if you have any questions. You will receive an invoice according to §25a UStG, which includes the sales tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and welcome after prior telephone arrangement. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Kodpfezgua Ajx Acpsdu Article number: Bending machine KS & HT.

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987 Kdjdpfxjzi Rl To Acpju

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, working width: 2,000 mm, cutting angle (min.): 1 °, stroke rate (min.): 40 1/min, sheet thickness (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, power: 2.2 kW (2.99 HP), overall weight: 500 kg, total length: 2,280 mm, total width: 550 mm, total height: 1,850 mm, warranty duration: 24 months, Equipment: emergency stop, steel thickness for cutting Kedpfeymc Nyjx Acpjdu

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Kdodjzk Akdjpfx Acpju Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: used, functionality: unexamined, Guillotine Shear Replacement Blade Hole spacing: 190 mm Ksdpoyym Rvefx Acpjdu Overall length: 3120 mm Depth: 12 mm Width: 57 mm Total lower angle: 8° Total upper angle: 6° Contact us for a quote

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Ksdpoy Tixpsfx Acpedu Price negotiable