Used Hartmetal Inserts for sale (1,883)

Condition: used, Year of construction: 1990, The Jagenberg 185-1, manufactured in 1990, is a machine with a format of 1850 mm, currently in stock and located in Germany. It is designed for working with corrugated board and features various shaft configurations (F/E/EE/EB/BE). The machine supports different gluing methods, including 3-point, 4-point, and special gluing. It has a minimum working width of 215 mm and a maximum of 1850 mm, with an insertion range from 150 mm to 1200 mm. After gluing, the working width ranges from 140 mm to 1000 mm. The machine also features motorized format adjustment and a folding base. The delivery terms are FCA. Format: 1850 mm Equipment: Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue Cedsvfxpvopfx Aacjhd folding bottom Motorized format setting

Condition: used, This listing is for the LEEC C330 Classic Incubator The unit is in full working condition and is ready for immediate use Key Specifications Chamber Capacity: 330 litres External Dimensions: 1417 mm (H) × 684 mm (W) × 620 mm (D) Csdpfxexhf Umo Aacohd Internal Dimensions: 1200 mm (H) × 550 mm (W) × 500 mm (D) Temperature Range: Ambient +5°C to +60°C Temperature Control Accuracy: Typically ±0.1°C at 37°C Temperature Variation: Typically better than ±0.2°C at 37°C Temperature Recovery Time: Approximately 4 minutes Power Rating: 440 watts (maximum) Weight: 107 kg Shelves Included: 6 Construction: Fully sealed chamber with polished stainless steel and rounded corners for easy cleaning Air Circulation: Fan-assisted for even temperature distribution Safety Features: Over and under temperature alarms, independent overheat safety cut-out, and password-protected settings Controller: Digital microprocessor with Fuzzy Logic and Auto-Tune features Notable Features Energy Efficiency: Low wattage heating elements combined with high-performance thermal insulation ensure excellent temperature stability while minimizing energy consumption. User-Friendly Interface: The digital controller displays both target and actual temperatures in real-time on a two-color display, making it simple to monitor and adjust settings. Enhanced Safety: Programmable alarm thresholds and an independent safety cut-out provide added protection against over-temperature conditions. Maintenance-Friendly Design: The sealed chamber with rounded corners facilitates easy cleaning, and the rear access port allows for safe insertion of temperature monitoring probes.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools Chsdpfsxbpukox Aacsd • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Year of construction: 2007, condition: excellent (used), Used CNC machining center incl. hedgehog buffer Manufacturer: Weeke Type: Optimat BHX 500 year of construction 2007 Technical data: Workpiece length min. - max. mm 200 - 2500 workpiece width min. - max. mm 70 - 1000 workpiece thickness min. - max. mm 4 - 80 Cedpfx Ajiy Di Ijacshd Workpiece stacking max. pcs. 2 Configuration 2V36, 2H8X/2Y, N2 X-Y 90, F2-ETP-6 KW Drilling spindles vertical per side, pcs. 36 Drilling spindles horizontal per side, in X-direction 8 Drilling spindles horizontal per side, in Y-direction 2 Grooving saw X-Y swiveling 90°, per side YES Milling spindle, per side, kW 6 Integrated options - Extension package vertical drilling spindles - Insertion table with automatic workpiece feeding and positioning - Length measurement in the machine - barcode software - Hedgehog buffer (description below) Technical data hedgehog buffer Number of buffer places 30 Workpiece dimensions length 250 - 3000 mm width 100 - 1000 mm Thickness 12 - 80 mm Length over all Approx. 5700 mm Useful width Approx. 2000 mm Takeover height Approx. 950 mm Pick-up height / document height Approx. 1120 mm Pitch Approx. 125 mm

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) Chsdpexp Hmaefx Aacsd - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: used, Year of construction: 1989, coil width: 350 mm, product width (max.): 350 mm, controller manufacturer: SIEMENS, controller model: S5 115 U, year of last overhaul: 2006, CONTROLS .. PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 350 mm .. sheet thickness max.: 8 mm .. coil weight max.: 4 to .. feed velocity max.: 10 m/min .. feedstock transport direction: left to right DECOILER .. design: single reel .. sheet width max.: 350 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 370 mm .. mandrel expansion range up to: 530 mm .. feed velocity max.: 10 m/min LEVELLER UNIT .. sheet width max.: 350 mm .. sheet thickness max.: 8 mm .. number of leveller rolls: 21 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 2 .. diameter of feed rolls: 120 mm .. feed velocity max.: 10 m/min ELECTRICAL SPECIFICATIONS .. total power consumption: 38 kW .. mains voltage: 380 V .. mains frequency: 50 Hz Chsdpfexr T U Aox Aacod DIMENSIONS / WEIGHTS .. total weight approx.: 13000 kg Line consisting of + Uncoiler ARKU AH4000/MSG-4Q + insert attachment ARKU + precision leveller ARKU RM 5035 4/21 + band loop ARKU levelling capacity according to diagram

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW Chodpjwmf Tvjfx Aacsd weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, This listing is for the Cole Palmer Techne Blockice Cooling Heating Block Csdpfexhfypox Aacjhd The unit is in full working condition and is ready for immediate use The Cole Palmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: used, mileage: 560,743 km, power: 315 kW (428.28 HP), first registration: 08/2014, fuel type: diesel, number of seats: 51, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++Original-KM+++ +++Voltage transformer+++ +++Sockets on all seats+++ Engine: Mercedes-Benz Emission class: Euro 6 Gearbox: Automatic Seats: 49+1+1 sleeper seats with 3-point seat belts _____ Safety and security * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Front fog lights * Immobilizer * LED lights * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Refrigerator * Center WC * Head leather inserts * Driver's microphone Exterior * Lifting / lowering system * Power steering * Tachograph with card Chodpfx Aasxq Iuuoced * Sun visor * Electric exterior mirrors * Central locking * Roof hatches, fans, roof ventilator Audio [&] Communication * Navigation system * Radio, CD * USB connection * Video, DVD Miscellaneous * Vehicle dimensions: Length 12.29 m, width 2.55 m, height 3.77 m * Hubcaps * Twin tires * Tires: VA 80%, HA 80%. Our internal vehicle number: 11180. Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Chedpsq Ikg Dsfx Aacjd Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: used, Year of construction: 1982, Press dimensions: 3500 x 2600 mm Electrohydraulic unit for 4 hinge cup drillings, complete, 4 hinge cup drilling units Left upper corner plate with 2 cross pressure cylinders 4x hydraulic wood holders Intermediate inserts for small pressing with drilling unit Central pressure beam 2600 mm Longitudinal pressure cylinder with counterholder 4x hinge cup drills Storage location: At customer site Codpfxsxftcaj Aacehd

Condition: new, maximum load weight: 27,627 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, KNAPEN K 100 moving floor trailer, approx. 92 cbm capacity, equipped with 'Cargo-Floor' flooring consisting of 21 XD Xtreme Durable 7 mm planks, fully emptying system (with moving bulkhead), insert and retract function, KNAPEN radio remote control V1 (for floor, lift axle, and work lights), loading pressure gauge, rear double-wing doors with rotary locking bar, container lock, access ladder and standing platform at the front superstructure, roll-up tarpaulin with stainless steel locking bars, side wall protection tarpaulin, high-pressure washer with 275-liter water tank and 20m hose on a reel, rear towing eye (10 tons), 28L water tank with soap dispenser, service door in front bulkhead, ABS, EBS, ALCOA Durabright aluminum rims, BPW Eco Air HD axles, BPW Airsave tire pressure system, 1st & 3rd axle are lift axles, 3rd axle maneuvering aid, disc brake system, Wabco SmartBoard, air suspension with lifting/lowering device, 5-position valve for air suspension, aluminum drop supports, stainless steel tool box, vehicle may have advertising stickered/applied and/or lettering. Chodpfjxl Nk Tjx Aacod

Condition: used, Number of boring spindles 3 St. Number of tools 1.3/4.1. St. Spindle diameter 50,40 mm Spindle length 120,320,125 mm weight 2500 kg loading dimensions L x W x H 3800x1400x2000 mm table length 3470 mm Weinig Univar 6 P to be sold on behalf of our customer ----- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body made of heavy, torsion-free and vibration-damping elements. Stops on the right in the profiling area made of Pertinax. Before Profiling spindle a split stop with sliding bar for short parts. Additional opening rail for large format frames. Feed system: Continuous, chainless feed equipped with rubber rollers. Blow-off device for feed rollers and table. Spindles, hood: Spindles with high concentricity and dynamically balanced. Extraction hoods designed for the cheapest chip flow. Easiest tool change Quick-opening hood lid. Machine operation, setting aids: Operating the machine from the front. Setting the stops for Tool diameter using mechanical number display. Machine electrics, motors, controls: Electrical design according to DIN VDE 0113 - Electrical equipment from Industrial machines EN 60204 IEC 204-1. Further electrical regulations are not taken into account. Engines dynamically balanced. Control of tool positions via selector switch on the control panel. Chedpfsxpi Elex Aacod Tools: Machine equipped with operating tools, but without Editing tools. SPINDLE 1 Synchronous spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 120 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10 mm Motor strength: 4 KW (5.5 KW) SPINDLE 2 Number of tools: 4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50mm Tool clamping length: 320 mm Feed profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Tool diameter max. For zero diameter 112 mm: 210 mm For zero diameter 140 mm: 232 mm Tool diameter max. (milling): 232 mm Tool zero flight circle: 112-140 mm Basic position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed: 1.1 KW Feed profiling unit: continuously 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100mm Workpiece length without tenon: min. 245 mm Special equipment: 3 Mechanical spindle brake for synchronous spindle, profiling spindle and Additional aggregates SPINDLE 3 1 fitting milling unit, right: for milling the fitting groove in the Milling pass or for groovi...

Condition: used, This listing is for the Ika MS1 Mini Shaker The unit is in full working condition and is ready for immediate use The IKA MS1 MiniShaker is a compact laboratory orbital shaker designed for efficient mixing of test tubes, small vials, and microtiter plates. It offers thorough and uniform mixing for a variety of applications. Chsdpfx Ajxhfumeacjd Key Features Orbital diameter: 4.5 mm for smooth, effective mixing action Speed range: 0 to 2,500 rpm With microtiter plates or test tube inserts: ~1,000 rpm max With rubber cup or direct contact: up to 2,500 rpm Operating modes: Touch mode: activates mixing only when pressed Continuous mode: engineered for uninterrupted operation

Condition: used, mileage: 1,475,133 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, number of seats: 82, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++ 2 double benches in the luggage compartment +++ +++ Engine overhauled by MAN 08/24 +++ +++ Alternator new, axle overhauled 06/21 +++ +++ Exhaust module new +++ General Engine: MAN AdBlue Emission standard: Euro 6 Total seats: 82 Seating: 80 + 1 + 1 sleeper seats Transmission: Automatic Safety Csdpoxq Iubefx Aacohd * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Xenon headlights * Brake assist * Lane departure warning system * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heater * Wood-look flooring * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Adjustable air outlets * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Mid-cabin toilet * Leather headrest inserts * Tour guide microphone * Driver microphone * Interior surveillance camera Audio, Communication, Electronics * Navigation system * Radio, CD * USB port at every seat * USB port at multimedia system * USB port at driver’s seat * Video, DVD * Power sockets * Power inverter Exterior * Trailer hitch * Matrix/destination display by Aesys * Lifting/lowering system * Power steering * Digital tachograph card * Sun visor * Prepared for sleeper cabin * Electrically adjustable side mirrors * Ski box anchors * Central locking * Roof hatches * Roof fans * Roof air vent Other * Twin tyres * Vehicle length: 14.00 m * Vehicle width: 2.55 m * Tyre tread: front axle approx. 40% * Tyre tread: middle axle approx. 40% * Tyre tread: rear axle approx. 40% Our internal vehicle number: 11840 Errors excepted. Images and text may deviate from the actual vehicle. Over 300 vehicles permanently in stock.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: Flowpack, - short delivery time, less than 10 weeks! - Cjdpfeq Ikfmsx Aacehd Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: good (used), Year of construction: 2010, age 2010 automatic inserting machine computer control with touch screen vacuum table foil packing unit neo X inkjet print system HP BigJet 300 NT stacker RIMA RS 3313-S Delivery time: immediately from stock Csdpfx Ajq Iyb Ujacjhd

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Codsw Sn I Ejpfx Aacehd Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - SK50 tool taper - Through hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input increment 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct position measurement with resolution 0.0001 mm Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Workpiece weight max. 2.5 kg Chain magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Workpiece weight max. 1.5 kg Stack magazine: - Suitable for stack magazine for indexable inserts CCD area camera measuring system: - Tool indexing and positioning by cooling channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Renishaw probe: - Touching off workpiece length / tool tip - Scanning flute lead angle - Positioning in a coolant hole at the tool tip Electrical connection: - 63A pre-fuse - Supply voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft and Bauer extinguishing system - Extraction: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Workpiece retainer ----- Operating procedure for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feeding by automatic handling system - Workpiece clamping by automatic collet chuck - Positioning of workpieces in the working area - Workpiece machining - Automatic return of the workpieces on a driven discharge conveyor Operating procedure for solid carbide indexable inserts: - Manual loading of the stack magazine in the working area - Workpiece feeding by automatic handling system - Automatic clamping using special clamping device - Positioning of workpieces in the working area - Workpiece machining - Automatic return of finished workpieces to the storage system Cedpfxjwpqkro Aacshd Drill grinding: - Grinding flute profile - Grinding point - Grinding outer contour - Grinding relief - Grinding circumferential margin - Cylindrical grinding Indexable insert grinding: - Grinding seating surface and pin ----- There are two additional identical machines for sale!

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for 1. Astoria-Pacific 311 AutoSampler 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Support Modules Cedpfx Aajxhftiecjhd For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Condition: used, mileage: 320,599 km, power: 300 kW (407.89 HP), first registration: 07/2021, fuel type: diesel, number of seats: 65, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, +++65 seats+++ +++New paint+++ +++Brand new cooler installed for €7,000+++ General Engine: DAF AdBlue Emission standard: EURO 6 Total seats: 65 Seating: 63+1+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Xenon headlights * LED lighting * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger compartment * Auxiliary heater * Wood-look flooring * Air conditioning * Curtains * Luggage racks * Individual air vents * Reading lights * Double glazing * Refrigerator * Headrests with leather inserts * Tour guide microphone * Driver's microphone Audio, communication, electronics * Navigation system * Radio / CD * USB port at every seat row * USB port at driver's position * Video / DVD Exterior * Lift/lowering system * Power steering * Digital tachograph * Sun visor * Electrically adjustable exterior mirrors * Central locking * Roof hatches * Roof fans * Roof ventilator Other features * Twin tyres * Vehicle length: 13.48 m * Vehicle width: 2.55 m * Wheel covers * Tyres front axle approx. 60% Chsdpfx Aaswk Spljcjd * Tyres rear axle approx. 60% Our internal vehicle number: 11514 Errors excepted. Images and descriptions may differ from the actual vehicle. Over 300 vehicles in stock at all times.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Chodpfx Aeq Ikg Ieaced Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: used, Manufacturer : CAM Model: AV65 Type: automatic vertical cartoner   Product insertion : manual or automatic (requires modification) Leaflet insertion : available Covers and safety devices Vacuum pump Single shot action module Production speed: 15 – 70 packs per minute Case formats : A – Width: 20 – 115 mm B – Length: 15 – 70 mm C – Height: 50 – 190 mm Cjdpevzh Tiofx Aacohd   Video: ?si=7gBIqcD_U4OJ55p3   Paper documentation available

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Cjdpfx Asq Ikgyoacshd Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Condition: new, Year of construction: 2023, functionality: fully functional, warranty duration: 12 months, !! We are happy to advise you !! Production orientation ////: Vertical Conveying system ////: Infeed and discharge optional and product-dependent Film feed ////: rear Forming shoulder ////: fixed Operator display ////: Touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (dependent on film width) Packaging height ////: dependent on forming shoulder Speed ////: 15-30 bags/min depending on material, package size, and product Film width ////: 110-320 mm Power consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz / single-phase Machine weight ////: approx. 600 Kg Machine dimensions ////: approx. 1720 x 1400 x 1750 mm Machine material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable ink wheel printer available as an option for an additional €1,200 Delivery time ////: Current delivery time under 10 weeks Platform and Z conveyor system €12,000 Features: Stainless steel construction—also suitable for the food industry • Application for powders, granules, liquids, pastes/dough, and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control with color icons • Pouch closing system for finished stand-up pouches • Safety protection covers • Can be combined with upstream and downstream machinery • Customized modifications/constructions on request • 12-head weigher integrated • each hopper 0.8L Codpjq Ikhaefx Aacehd Additional options (on request and at extra charge): • Stainless steel finish/coating • Zigzag knife, Euro hole punch, etc. • Automatic stop for empty product (no product – no bag) • Automatic product feeding systems, stepwise insertion systems • Perforation units (tear-open thread) for easy opening • Length-dependent product processing by photocell sensor Production orientation: Vertical