Used Hartmetal Inserts for sale (1,946)

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) Blodpfx Aoy Umdljl Asn * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: Bodpfxjzbc Dao Al Aoln - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: used, turning length 800 mm Blsdpfx Asxacg Rjl Asn turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Blsdpfx Ajzutraol Asn Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Blsdpfx Alezuynhj Aon Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) Blsdozvduujpfx Al Asn - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: used, Year of construction: 1987, Used Machine Year of Manufacture: 1987 Condition: Completely Overhauled Features and Technical Specifications: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-changing - With clockwise/counterclockwise rotation - Milling spindle: MK 5 / 30 mm - Height and swivel adjustment via handwheel Bledozk Nzijpfx Al Asn - Speeds: 3000/4500/6000/9000 rpm - Swivel range of the milling spindle: -5 to 45° - Milling stop with metal jaws - Mounted on a round insert plate and thus rotatable 360° - With table extensions on both sides featuring extendable frame supports - With 4-roller feed mechanism Weight: approx. 900 kg Pictures show the machine in its pre-overhaul condition Availability: approx. 4 weeks after order placement

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel Bledpfx Alszz Umxj Aon * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] Bsdpfjzz Hk Njx Al Aoln EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: used, mileage: 18 km, power: 75 kW (101.97 HP), first registration: 11/2025, fuel type: diesel, empty load weight: 1,568 kg, overall weight: 2,300 kg, wheelbase: 2,970 mm, next inspection (TÜV): 11/2027, color: grey, emission class: euro6, number of seats: 2, loading space volume: 4 m³, loading space length: 2,140 mm, loading space width: 1,600 mm, loading space height: 1,230 mm, construction height: 1,860 mm, working width: 1,855 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, Navigation via smartphone possible. Extended warranty for 3 years, up to 250,000 km. Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, basic digital cockpit, lane keeping assist, front assist system with city emergency braking function, traffic sign recognition, driver alertness system, cruise control, speed limiter with predictive speed control, leather multi-function steering wheel with shift paddles, rear parking sensors, full-size spare wheel, summer tires, windshield wipers with intermittent function and light sensor, rain sensor, digital radio reception (DAB+), Composition audio system (touchscreen color display), Bluetooth hands-free system, USB multimedia interface (Type C - with increased charging performance), App-Connect, emergency call system, tire pressure monitoring display, heat-reflecting glass, tachometer, driver airbag, front passenger airbag, front head and side airbags, electronic stability program (ESP), brake assist system - ASR/ABS - EDS - MSR, start/stop system, preparation for We Connect and We Connect Plus mobile online services, service booklet available, right sliding door, immobilizer (electronic), headlight range control, tool kit and jack, exterior temperature display, electronically controlled power steering (Servotronic), paint: Pure Grey, wheel covers, special paint: Pure Grey, commercial vehicle registration, non-smoker package, exterior mirrors and door handles in black, unpainted, sliding door trim in silver, exterior mirrors in black, unpainted, sliding door trim in silver, roof rails/roof rack preparation, automatic headlight activation (ALS), standard rear lights, preparation for online services, interior trim: matte decorative inserts, driver's seat, front passenger seat, front floor covering (carpet), interior paneling in the cargo/passenger compartment: standard, driver's seat height adjustable, folding remote key (2), door seals with dust protection, plastic door panels, front seat belts with belt tensioners - height adjustable, seat belt warning system for front seats, interior light in the cargo/passenger compartment: 1 piece, open glove compartment, preparation for alcohol interlock system (Alcolock), front beverage holders, tie-down points in the luggage/cargo compartment, first aid kit and warning triangle, front camera (multifunction camera in windshield), anti-lock braking system (ABS), electric parking brake with auto-hold function, multi-collision brake, steering column (steering wheel) mechanically adjustable - height/length adjustment, SCR system (AdBlue technology), body/superstructure: panel van, drive type: front-wheel drive, wheelbase 2970 mm, 6-speed gearbox, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will gladly advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an additional charge. Export license plates available here. Trade-in of your old vehicle possible. Retrofitting of: - trailer couplings, up to 3500 kg possible - auxiliary heaters - screen for reversing camera or navigation via mobile phone (Android Auto) - reversing system with rear-view camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs Blodpfxow S S I Ne Al Aen

Condition: used, mileage: 48,292 km, power: 103 kW (140.04 HP), first registration: 06/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, loading space length: 4,070 mm, loading space width: 1,860 mm, loading space height: 1,921 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1182. G007077 ----EQUIPMENT * Rear doors with a 270° opening angle * Paint: Solid color paint * Package: City - Blind Spot Assist: (+ Rear Traffic Alert + Trailer Assist: Trailer and trailer length detection) - Electrically folding exterior mirrors - Rear parking aid: Reversing camera (incl. 7" audio system with touchscreen + DAB + Apple CarPlay and Android Auto) * Blind Spot Assist * Seat Belts: Three-point safety belts on all seats - Seat belt force limiter, front - Double seat belt pretensioners, front * ABS * Storage compartment on the dashboard * Storage: - Storage compartment under the driver's seat (not with seat base trim) - Storage compartments in the front doors - Storage compartment above the glove compartment - Storage compartments above the ventilation nozzles in the center of the dashboard - Container, removable under the front passenger seat - Glove compartment on the right Bjdozr Az Eopfx Al Asln * Airbag: Driver airbag * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, incl. side turn signal with wide-angle insert * Hill-Start Assist * On-board computer * Brake assistant, mechanical * Double dome light in the cab with delay function * Tachometer * Adaptive third brake light * ESP incl. ASR: Brake assistant, hydraulic + Hill-Holder automatic locking for starting on a slope + Load-Adaptive Control (adjustment of ABS, ASR and ESP functions to vehicle load) * Rear parking aid, acoustic * Power windows, front, electric with convenience function on the driver's side * Pedestrian warning (acoustic) rear * Speed limiter/cruise control * Transmission: 6-speed manual transmission * Cup holder and clipboard * Rear door (double-leaf), closed * Air conditioning, front, manual, with pollen filter, incl. cooled glove compartment * Headrests, front, fully padded * Steering wheel with reach adjustment * Headlight range adjustment, manual * Multifunction display with display for time, warning messages for lights on and exceeding the selected speed, as well as on-board computer * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Side protection strips in black * Service interval display * Power steering * Seats: Driver's seat with longitudinal, height and backrest adjustment * Seats: Driver's seat with armrest and lumbar support + Front passenger double seat * Start/Stop system * Socket (12 volts) in the center console * Rear bumper with step * Daytime running lights * Partition, closed * Doors: Sliding door on the right, sheet metal * Inertia switch to interrupt fuel and electrical supply in the event of an accident * 10x lashing eyes according to DIN 75410-3 on the cargo floor * Warning tone and light for unfastened seat belts, front * Immobilizer with transponder * Central locking with high-frequency remote control ... and more ----The vehicle is not detailed! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. Blodpfey Auhzox Al Ajn * Chassis: hot-dip galvanized + R

Condition: used, Year of construction: 2016, Dough divider WP Kemper Relaxer S This model produces dough strands one at a time, gently handling the dough. The tedious manual dough strand production is eliminated in small and medium-sized businesses. Dough strand production for storage in rattan or plastic baskets. Year of manufacture: 2016 Condition: cleaned and inspected Performance: 4 dough strands per minute / 240 per hour Dimensions of the dough strands (L x W x H): 850 x 165 x 110 mm Suitable for TA 150 to 180 Hopper capacity approx. 160 kg (opening 720 × 600 mm) Blodpfx Aloz A Skbs Aen Hopper filling height: 1830 mm (loading with a tilting lift is possible) Insertion device for 1000 mm long baskets Operation via two-hand safety switch Machine is mobile with a locking mechanism External dimensions (L x W x H): 1500 x 750 x 1830 mm

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) Bodpfxowmdbre Al Ajln up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control system for height, tilt, and stop - Program memory for 99 programs - With sliding table insert - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg Bsdpfx Alezyy Dtj Asln

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear Bljdpez Dmn Dsfx Al Aen * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Blsdpsz Dmn Rsfx Al Asn Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Bjdjxzk Niopfx Al Asln Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: tail-lift, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, centre-axle trailer - Outer frame, slightly angled, new design with "Load-Lock-Profil" for lashing strap attachment - 2-speed landing leg, front - Plastic toolbox - Platform height 1080 mm - Drawbar coupling, centre-axle trailer - Drawbar with tested 40 mm drawbar eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - Drawbar mechanically length-adjustable from approx. 1950-2300 mm, lockable in approx. 50 mm increments, drawbar length set to approx. 2100 mm #Axles + suspension - SAF/BPW axles, manufacturer's choice - Axles/running gear laser-aligned, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Spring-loaded parking brake - Duomatic coupling head, front, with connecting line to the towing vehicle - 24-volt EBS, electronic braking system with EBS connector, front, with connecting cable - With lifting & lowering valve - Vehicle driving stability system Bedpfx Aljzcp E Ts Aoln #Wheels and tyres - 4x 235/75 R17.5, manufacturer's choice - 4x steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED lighting on the sides - 2 white position lights, front - 2 white/red outline marker lights, rear - 1x 15-pin plug, front, with connecting cable #Floor - Screen-printed plywood flooring, approx. 30 mm thick, for high point load capacity - Platform length approx. 7,300 mm #Front wall / front corner posts - Pass-through loading system with front barn doors, 2-leaf, each with 2 internal rod locks, steel corner posts, release mechanism for side curtain - Loading ramp flap, approx. 2,400 mm wide, split once, approx. 350 mm long, for resting on the tail lift, load capacity approx. 1,800 kg, incl. support for the tail lift (drawbar length then approx. 2100 mm; for a tail lift length of 1800 mm, the coupling set-back dimension from the truck must then be min. 20 to max. 240 mm). Note! Usable internal length is reduced by the loading ramp flap! - Side boards #Centre stanchions - 2 pairs of sliding stanchions, adjustable along the full length, with 4 insertion pockets each and a long pocket at the bottom - Insert slats - 5 rows of wooden insert slats (4 rows in combination with side boards) #Rear wall / rear corner posts - Rear corner posts, steel, up to the underside of the roof, tarpaulin attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Tensioning buckles made of stainless steel - Customer lettering possible on side curtains and rear doors #Roof - Sliding roof cover, rear end bow lifts up, cover slides from rear to front, tarpaulin colour: white - Optimised rain strip at the rear, at the top of the end bow, above the doors #Country of registration / plates - Germany - With DEKRA inspection and certification (in accordance with §13 EC-FGV) - Fliegl manufacturer's certificate for body strength to EN 12642 XL - Prepared for single-line number plate holder - Reflective strips: white, continuous along the bottom of the side curtains and at the top corners - Reflective strips: red, all around the rear doors - Bespoke transport solution

Condition: used, mileage: 55,449 km, power: 92 kW (125.09 HP), first registration: 11/2006, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro3, loading space width: 1,740 mm, loading space length: 3,350 mm, loading space height: 1,870 mm, Year of construction: 2006, total length: 5,651 mm, total width: 1,974 mm, total height: 2,800 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, Well-maintained Ford Transit 125 T350 panel van L3/H3 with automatic transmission and shelving system +++ Steering wheel paddle shifters +++ Ex-government vehicle from the German Federal Police, regularly serviced with a full service history. This vehicle was used exclusively to handle breakdowns of fleet vehicles outside the facility. It was always kept in a dry, heated facility and is therefore in excellent condition. Features: - Automatic transmission with steering wheel shift paddles - Air conditioning - ABS - 2 airbags - Individual front seats with armrests - Electric mirrors - Central locking with remote - Rear doors with 270° opening angle - Rear step - Side sliding door with window - High, closed rear wing doors - Roof-mounted rear strobe lights Bedpfxsyumpao Al Asln Cargo area: - Wooden flooring with shelving system - 220V external power supply with fuse box and on-board sub-distribution - Roof cutout with Plexiglas insert for daylight in the cargo area Full service history, last inspection at 54,064 km Very good all-season tires from DOT 2018, 7.5/8.0 mm tread depth, no signs of cracking (vehicle was stored indoors, shielded from UV light) Cargo area dimensions: 3350 x 1740 x 1870 mm (L x W x H) This Transit drives well and the automatic transmission shifts smoothly; also an ideal base for a camper conversion. +++ Subject to error, modifications, and prior sale +++

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Blodpfov Sthgex Al Asn Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Bledpfx Alsyrtzqe Aen Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Bledpfx Aleyy A Iqj Asn Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Bjdpfx Aloxz Hh Uj Ajln Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, mileage: 54,400 km, power: 195 kW (265.13 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 06/2028, color: grey, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Storage package, luggage compartment separation (net), rear cup holders, parking assistance package with remote parking assistant, driving assistance system: parking assistant, parking aid plus front, side and rear, acoustic and visual with environment display, Audi smartphone interface, controls with glass optics, incl. extended aluminum look, business package, touring assistance package, driving assistance system: emergency assistant with automatic emergency call, driving assistance system: predictive efficiency assistant, driving assistance system: adaptive driving assistant, exterior mirrors electrically adjustable, heated and foldable, with automatic anti-glare and memory function, exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), parking aid plus front, side and rear, acoustic and visual with environment display, comfort climate control 4-zone, front seat heating, interior mirror with automatic anti-glare function, anti-theft wheel locks, driving assistance system: exit warning, interior trim: interior elements in synthetic leather top and bottom, contour / ambient lighting package (plus), headrests, variably adjustable, fuel tank: 73 liters, lumbar support front, electrically adjustable, light alloy wheels 8x18 (5-arm, for winter tires), metallic paint, new car tire warranty, panoramic sunroof front electrically, rear fixed, spare wheel as emergency spare, seat cover / upholstery: leather / 550 combination, sound system Bang & Olufsen Blsdpfx Aljztk Sue Ajn Additional equipment: Airbag on passenger side can be deactivated, airbag driver / passenger side, ambient lighting, Audi connect (internet-based services), Audi connect (emergency call and assistance system), Audi drive select, exterior mirrors, aspherical, left, exterior mirrors, aspherical, right, exterior mirrors, vehicle color, turn signal lights LED integrated in exterior mirrors, headliner, fabric, silver, roof rails, anodized, door sill trims with aluminum insert, driving assistance system: occupant protection system (Audi pre sense basic), driver information system (FIS) with color display, rear seat system (3 seats), windshield with heat-insulating glazing, glossy package, rear lights LED, interior trim: decorative inserts aluminum fragment, Isofix mounts for child seat, body: 4-door, head airbag system (Sideguard), steering column (steering wheel) mech. height / longitudinal adjustment, light alloy wheels, mild hybrid 195 kW (engine 2.0 L - 195 kW 16V TFSI), mild-hybrid technology, multi-media interface MMI Basic Plus / MMI Radio Plus, multi-media interface MMI Navigation, non-smoker package, Otto particle filter (OPF), radio reception digital (DAB), rear seat back split / foldable (40:20:40), low emission according to emission standard Euro 6d, heated windshield washer nozzles, luggage compartment, rail system, side airbags front, seats front manually adjustable, standard suspension, start / stop system, jack, heat-insulating glazing (side / rear)