Used Heat Treatment for sale (15,924)

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Ffedpfx Abot R Tr Souou

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Fsdpfsru Hviox Abusfu

Year of construction: 1994, condition: ready for operation (used), Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible. Ffodpfxow Duvnj Abusu

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Fedpfx Abexc Ni Reusfu

Condition: ready for operation (used), A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible. Ffedpew Nq Rwjfx Abueu

Year of construction: 2001, condition: ready for operation (used), Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible. Ffsdpfxsrp E Nke Abuou

Year of construction: 1960, condition: ready for operation (used), Throughput capacity: 9000l/h, heat recovery: 80%, operating temperature range: 5°C-71°C, max. operating pressure: 5bar, volume: 1/2: 97l/96l. On-site inspection is possible. Ffsdsyarp Aspfx Abuou

Year of construction: 2012, condition: ready for operation (used), Four heat exchangers from various manufacturers are available. 1) Shell and tube heat exchanger K. Ley Maschinen- und Apparatebau, year of manufacture: 1999, material: stainless steel/cast iron, heat transfer surface: 30m²-40m², operating pressure inside/outside: 25bar/45bar, max. operating temperature: 250°C, internal/external volume: 290l/200l, machine dimensions X/Y: approx. 6400mm/400mm, weight: approx. 1800kg. 2) Shell and tube heat exchanger Wisstaler Hüttental, year of manufacture: 1979, heat transfer surface: 80m²-120m², max. operating temperature: 150°C, internal/external volume: 579l/1387l, machine dimensions X/Y: 2500mm/800mm, weight: approx. 2800kg. 3) Shell and tube heat exchanger Vehterus PSHE 3LL-270/5/5, year of manufacture: 2012, heat transfer surface: 19.9m², capacity: 245kW, operating pressure: 16bar, test pressure: 33bar, max. operating temperature: 110°C, internal/external volume: 21.4l/33.2l, machine dimensions X/Y: approx. 850mm/400mm, weight: approx. 300kg. 4) Plate heat exchanger GEA BT30-5C-10V-80, year of manufacture: 2010, heat transfer surface: 5m²-10m², max. operating temperature: 200°C, machine dimensions X/Y/Z: approx. 500mm/350mm/750mm, weight: approx. 520kg. Documentation available. An on-site inspection is possible. A package sale is preferred. Fsdjxn S S Sjpfx Abusfu

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Fedpfx Abevrip Heuofu

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Fjdotphubepfx Abusfu

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Fjdpfxsx Srphj Abusfu

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Fjdpfx Aex Syv Njbuofu

Condition: ready for operation (used), A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport. Ffsdjtwqzrepfx Abuou

Condition: used, This listing is for the Grant QBT1 Heat Block The unit is in full working condition and is ready for immediate release Ffedjx S H D Hspfx Abuou The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Ffodpfxoupy S No Abuju

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heating cannon is a powerful heater that can be used in halls, workshops, marquees, for materials, greenhouses, and more. Currently, 1 unit is in stock and available for immediate delivery. Condition: New / unused from warehouse clearance / insolvency sale Scope of delivery: 1 pc. Remko CLK 150 heater with oil burner 1 pc. room thermostat with power cable Nominal heat output: 150 kW Air flow rate: 9,710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas loss: max. 9% Flue outlet: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. Fjdpfx Abjxli I Seuofu All information provided without guarantee. Subject to prior sale.

Condition: new, Alfa Laval CBH62-12AH-G Fsdpjxp Nzasfx Abuefu Capacity: approx. 10 kW Length: 530.00 mm Width: 120.00 mm Height: 90.00 mm Weight: approx. 5 kg Connection Side A: 1" external gas thread Side B: 19 mm weld connection Price per piece Several units in stock All staff speak Dutch, German, and English Prices are exclusive of VAT Shipping possible (extra fee) (Subject to changes and errors in technical data, information, and prices, as well as prior sale)

Condition: new, Alfa Laval CBH65-22 AH-F 20 kW Performance: 20 kW Price per unit Several units in stock All staff speak Dutch, German, and English. Prices are exclusive of VAT. Shipping possible (at extra cost). (Specifications, information, and prices are subject to change and errors; prior sale reserved.) Ffedpexqyaijfx Abuou

Condition: used, Year of construction: 1988, Robatherm RL 300 heater with Viessmann gas burner with valve, including 10 m stainless steel chimney with cleaning flaps. Year of manufacture: 12/88. For sale due to new acquisition. Fully functional. Fsdpfox Uqc Eex Abuofu

Condition: new, Year of construction: 2026, functionality: fully functional, power: 250 kW (339.91 HP), Warm air generator for wood pellets and/or wood chips with output from 250kW to 500kW. Suitable for heating of industrial halls, buildings, warehouses, as well as for drying processes such as hay, grass, and other crops. Ffodpfx Asyaly Uebueu

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: TERLET Type: Terlotherm T2-6 (with mechanical seal) Year of manufacture: 1994, completely overhauled in 2019 by TERLET Capacity: up to 2,000 kg/h for cream cheese/quark with recently renewed SEW (Germany) drive Including spare parts Condition: good, fully functional TERLET TERLOTHERM – Vertical Scraped Surface Heat Exchanger The TERLET TERLOTHERM is a vertical scraped surface heat exchanger designed for the gentle heating and cooling of viscous, sensitive, or burn-prone products. The scraper system continuously renews the product surface – ensuring high heat transfer rates, uniform product quality, and safe processing even for challenging recipes. Typical fields of application • Dairy products (e.g. yogurt/dessert masses, cream/milk mixtures, sensitive products) • Sauces, soups, dressings, delicatessen • Fat-/emulsion-based products (e.g. margarine, mayonnaise) • Other highly viscous / particulate / heat-sensitive products Ffodpfx Absygmrfeueu Advantages at a glance • Gentle heat treatment: reduces burning/fouling thanks to continuous scraping • High efficiency: large, actively cleaned heat exchange surface → high performance in a compact design • Hygienic product design: product-contact parts in stainless steel, seals made of FDA-compliant materials (per documentation) • Service-friendly: easy inspection/cleaning, scrapers are easily accessible for servicing • CIP-capable: suitable for cleaning-in-place (CIP)

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Fodpfog Uwx Rsx Abuofu

Condition: ready for operation (used), System includes (1) Two-Cylinder Motor HERFORD 2H 280, power: 150PS, rotational speed: 400/min, electric/ heating power: 83/ 140kWh, with Generator MARELLI MJB 250 LE4 (2) Three-Cylinder Motor HERFORD 3H 280, power: 225PS, rotational speed: 400/min, electric/ heating power: 125/ 212kWh, with Generator MARELLI MJB 250 MA4. Fjdpfx Aogg Stfobujfu

Condition: new, Year of construction: 2024, functionality: fully functional, fuel: electricity, input frequency: 50 Hz, Equipment: type plate available, ZIEHL ABEGG AXIAL FAN MAXvent owlet REF: DN12V-6DF.K9.14.P6 Fsdpexvz Uxefx Abusfu Casing: The fan casing is made of hot-dip galvanized steel, long version with a connection according to EUROVENT standards. The fan's operating temperature range is -20 to 50°C. Casing diameter: 1350 mm Impeller: The impeller is made of the new ZAmid composite material – it is extremely lightweight yet as hard as steel. The impeller is dynamically balanced and fitted with 6 blades at a 14° pitch. Impeller diameter: 1250 mm Number of poles: 6 SIEMENS three-phase motor: 400V 50Hz 9.57 kW 19.70A 980 rpm BRAND NEW EQUIPMENT, NEVER INSTALLED

Condition: new, El. heated chamber furnace, make VEI type: KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW Ffjdpfx Aeipvgiebueu fan power: 5,5 kW connected load: 61 kVA